[Tue Oct 18 02:48:37 2011] Detection parameters:
  Position = (505.2, 757.5) = 17 59 8.74 -29 10 6.7
  Extent = 0.5" x 0.5", rotation angle = 140 degrees
  Source counts = 13.2 +/- 3.7
  Background counts = 0.8
  Rate = 0.0007 +/- 0.0002

[Tue Oct 18 02:48:38 2011] Off-axis axis estimate = 5.90'
[Tue Oct 18 02:49:30 2011] Using EEF radius (= 1.58 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:49:30 2011] Initial guess for spatial extent in simple fitting = 1.58"
[Tue Oct 18 02:49:30 2011] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.887
[Tue Oct 18 02:49:30 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 1.58"
[Tue Oct 18 02:49:30 2011] fullrun_ccd1_acisf11303_pi14-548_cl_pass0_src5.ximg exists
[Tue Oct 18 02:49:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11303_pi14-548_cl_pass0_src5.csv
[Tue Oct 18 02:49:30 2011] fullrun_ccd1_acisf11303_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Oct 18 02:49:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11303_pi14-548_cl_pass0_src5.csv
[Tue Oct 18 02:49:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11303_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11303_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:49:30 2011] fullrun_ccd1_acisf11303_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Oct 18 02:49:30 2011] fullrun_ccd1_acisf11303_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Oct 18 02:49:30 2011] Fit fullrun_ccd1_acisf11303_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Oct 18 02:49:40 2011] Spatial fit model total counts = 31.704100, observed total counts = 27.000000
[Tue Oct 18 02:49:40 2011] Offset between fit and detection position for source 10 = 0.444856 pixels
[Tue Oct 18 02:49:40 2011] 31.676500 total counts/ 9.525800 bgd. counts: snr = 7.176897
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.444856 pixels
  Position = (505.2, 757.9) = 17 59 8.76 -29 10 6.7
  Extent = 1.4" x 1.0", rotation angle = -0
  Source counts = 22.2 +/- 5.6
  Background counts = 9.5
  Rate = 0.001 +/- 0.0003
[Tue Oct 18 02:49:40 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:49:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:49:40 2011] Assessing source extent using major
[Tue Oct 18 02:49:40 2011] Source does appear to be extended
[Tue Oct 18 02:49:40 2011] Computing asymmetry using major and minor axis, asym = 1.35
[Tue Oct 18 02:50:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 02:50:05 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Tue Oct 18 02:50:05 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.880
[Tue Oct 18 02:50:05 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 1.19"
[Tue Oct 18 02:50:05 2011] fullrun_ccd1_acisf11303_pi14-548_cl_pass1_src5.ximg exists
[Tue Oct 18 02:50:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11303_pi14-548_cl_pass1_src5.csv
[Tue Oct 18 02:50:05 2011] fullrun_ccd1_acisf11303_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Oct 18 02:50:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11303_pi14-548_cl_pass1_src5.csv
[Tue Oct 18 02:50:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11303_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11303_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 02:50:05 2011] fullrun_ccd1_acisf11303_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Oct 18 02:50:05 2011] fullrun_ccd1_acisf11303_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Oct 18 02:50:05 2011] Fit fullrun_ccd1_acisf11303_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Oct 18 02:50:12 2011] Spatial fit model total counts = 26.370700, observed total counts = 25.000000
[Tue Oct 18 02:50:12 2011] Offset between fit and detection position for source 10 = 0.725761 pixels
[Tue Oct 18 02:50:12 2011] 25.795600 total counts/ 10.490600 bgd. counts: snr = 4.725341
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.725761 pixels
  Position = (505.1, 758.7) = 17 59 8.76 -29 10 6.4
  Extent = 0.9 (0.4-2.1)", rotation angle = 0
  Source counts = 15.3 +/- 5.1
  Background counts = 10.5
  Rate = 0.0008 +/- 0.0003
[Tue Oct 18 02:50:12 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 02:50:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 02:50:12 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 02:50:12 2011] Source does appear to be extended
[Tue Oct 18 02:50:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 02:56:48 2011] Not overwriting source region fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_src.reg
[Tue Oct 18 02:56:48 2011] Extracting stamp from image fullrun_ccd1_acisf11303_pi14-548_cl_sm2.00.img.gz, (462, 716) - (548, 801)
[Tue Oct 18 02:56:48 2011] Writing fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10.gif
[Tue Oct 18 02:58:58 2011] ../../acisf11303/products/events/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_src.evt and ../../acisf11303/products/events/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Oct 18 02:58:58 2011] Size of ../../acisf11303/products/events/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_src.evt.gz[events] = 23 counts
[Tue Oct 18 02:58:58 2011] Mean chipx,y = (558.57, 722.65)
[Tue Oct 18 02:58:58 2011] Mean tdetx,y = (4409.35, 4665.57)
[Tue Oct 18 02:58:58 2011] chipx,y range = (537.00-576.00, 696.00-737.00)
[Tue Oct 18 02:58:58 2011] Size of ../../acisf11303/products/events/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 14 counts
[Tue Oct 18 02:58:58 2011] ../../acisf11303/products/images/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_src.img and ../../acisf11303/products/images/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Oct 18 02:58:58 2011] Not generating rmf since there are only 15 counts
[Tue Oct 18 02:58:58 2011] arf not found, will run specextract
[Tue Oct 18 02:59:23 2011] ../../acisf11303/products/spectra/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10.warf not found
[Tue Oct 18 02:59:23 2011] ../../acisf11303/products/spectra/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10.wrmf not found
[Tue Oct 18 02:59:23 2011] Removal of ../../acisf11303/products/spectra/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10.soff failed
[Tue Oct 18 02:59:29 2011] ../../acisf11303/products/lightcurves/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_src.lc and ../../acisf11303/products/lightcurves/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Oct 18 03:06:09 2011] Spectrum 10 has only 15 counts, deleting rmf
[Tue Oct 18 03:06:09 2011] 183.072
[Tue Oct 18 03:31:21 2011] Updating aperture counts using extracted products
[Tue Oct 18 03:31:21 2011] Error reading totcts from fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Oct 18 03:31:21 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 03:31:21 2011] Using photon index=1.80, rate=0.000771, arf fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10.arf
[Tue Oct 18 03:31:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 03:31:21 2011] Updating source flux to 9.8e-15
[Tue Oct 18 03:31:28 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Oct 18 03:31:29 2011] acisf11303/analysis//spectral/fullrun_ccd1_acisf11303_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete