[Tue Sep 27 02:21:14 2011] Detection parameters:
  Position = (162.3, 379.2) = 3 11 29.39 1 23 30.1
  Extent = 1.0" x 0.5", rotation angle = 127 degrees
  Source counts = 18.8 +/- 4.5
  Background counts = 1.2
  Rate = 0.0008 +/- 0.0002

[Tue Sep 27 02:21:15 2011] Off-axis axis estimate = 5.20'
[Tue Sep 27 02:21:59 2011] Using EEF radius (= 1.26 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:21:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 02:21:59 2011] Initial guess for spatial extent in simple fitting = 1.26"
[Tue Sep 27 02:21:59 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.958
[Tue Sep 27 02:21:59 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.26"
[Tue Sep 27 02:21:59 2011] fullrun_ccd6_acisf11280_pi14-548_cl_pass0_src2.ximg exists
[Tue Sep 27 02:21:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11280_pi14-548_cl_pass0_src2.csv
[Tue Sep 27 02:21:59 2011] fullrun_ccd6_acisf11280_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Sep 27 02:21:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11280_pi14-548_cl_pass0_src2.csv
[Tue Sep 27 02:21:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11280_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11280_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:21:59 2011] fullrun_ccd6_acisf11280_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Sep 27 02:21:59 2011] fullrun_ccd6_acisf11280_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Sep 27 02:21:59 2011] Fit fullrun_ccd6_acisf11280_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Sep 27 02:22:08 2011] Spatial fit model total counts = 30.911200, observed total counts = 31.000000
[Tue Sep 27 02:22:08 2011] Offset between fit and detection position for source 2 = 1.241719 pixels
[Tue Sep 27 02:22:08 2011] 31.087600 total counts/ 19.431200 bgd. counts: snr = 2.644324
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.241719 pixels
  Position = (162.3, 380.4) = 3 11 29.41 1 23 30.4
  Extent = 0.7 (0.3-1.3)", rotation angle = 0
  Source counts = 11.7 +/- 5.6
  Background counts = 19.4
  Rate = 0.0005 +/- 0.0002
[Tue Sep 27 02:22:08 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 02:22:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 02:22:08 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 02:22:08 2011] Source does appear to be extended
[Tue Sep 27 02:22:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 02:22:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Sep 27 02:22:55 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Tue Sep 27 02:22:55 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.848
[Tue Sep 27 02:22:55 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.68"
[Tue Sep 27 02:22:55 2011] fullrun_ccd6_acisf11280_pi14-548_cl_pass1_src2.ximg exists
[Tue Sep 27 02:22:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11280_pi14-548_cl_pass1_src2.csv
[Tue Sep 27 02:22:55 2011] fullrun_ccd6_acisf11280_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Sep 27 02:22:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11280_pi14-548_cl_pass1_src2.csv
[Tue Sep 27 02:22:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11280_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11280_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 02:22:55 2011] fullrun_ccd6_acisf11280_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep 27 02:22:55 2011] fullrun_ccd6_acisf11280_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep 27 02:22:55 2011] Fit fullrun_ccd6_acisf11280_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep 27 02:23:11 2011] Spatial fit model total counts = 30.760100, observed total counts = 31.000000
[Tue Sep 27 02:23:11 2011] Offset between fit and detection position for source 2 = 0.043529 pixels
[Tue Sep 27 02:23:11 2011] 31.127100 total counts/ 19.321300 bgd. counts: snr = 2.685822
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.043529 pixels
  Position = (162.2, 380.4) = 3 11 29.41 1 23 30.4
  Extent = 0.7 (0.2-1.5)", rotation angle = 0
  Source counts = 11.8 +/- 5.6
  Background counts = 19.3
  Rate = 0.0005 +/- 0.0002
[Tue Sep 27 02:23:11 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 02:23:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 02:23:11 2011] Assessing source extent using major axis lower bound
[Tue Sep 27 02:23:11 2011] Source does appear to be extended
[Tue Sep 27 02:23:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 02:24:35 2011] Not overwriting source region fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_src.reg
[Tue Sep 27 02:24:35 2011] Extracting stamp from image fullrun_ccd6_acisf11280_pi14-548_cl_sm2.00.img.gz, (130, 348) - (194, 412)
[Tue Sep 27 02:24:35 2011] Writing fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2.gif
[Tue Sep 27 02:24:40 2011] ../../acisf11280/products/events/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_src.evt and ../../acisf11280/products/events/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Sep 27 02:24:40 2011] Size of ../../acisf11280/products/events/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_src.evt.gz[events] = 21 counts
[Tue Sep 27 02:24:40 2011] Mean chipx,y = (733.10, 891.95)
[Tue Sep 27 02:24:40 2011] Mean tdetx,y = (3608.10, 2593.95)
[Tue Sep 27 02:24:40 2011] chipx,y range = (717.00-753.00, 875.00-911.00)
[Tue Sep 27 02:24:40 2011] Size of ../../acisf11280/products/events/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 10 counts
[Tue Sep 27 02:24:40 2011] ../../acisf11280/products/images/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_src.img and ../../acisf11280/products/images/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Sep 27 02:24:40 2011] ../../acisf11280/products/spectra/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_src.pi and ../../acisf11280/products/spectra/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Sep 27 02:24:40 2011] Not generating rmf since there are only 11 counts
[Tue Sep 27 02:24:44 2011] ../../acisf11280/products/lightcurves/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_src.lc and ../../acisf11280/products/lightcurves/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Sep 27 02:25:31 2011] 185.826
[Tue Sep 27 02:27:47 2011] Updating aperture counts using extracted products
[Tue Sep 27 02:27:47 2011] Error reading totcts from fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_src.pi.gz
[Tue Sep 27 02:27:47 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 02:27:47 2011] Using photon index=1.80, rate=0.000481, arf fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2.arf
[Tue Sep 27 02:27:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Sep 27 02:27:47 2011] Updating source flux to 5.7e-15
[Tue Sep 27 02:28:02 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Sep 27 02:28:03 2011] acisf11280/analysis//spectral/fullrun_ccd6_acisf11280_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete