[Mon Sep 26 23:07:30 2011] Detection parameters:
  Position = (519.2, 143.7) = 0 43 41.24 40 54 45.8
  Extent = 1.6" x 1.0", rotation angle = 21 degrees
  Source counts = 189.7 +/- 14.4
  Background counts = 16.3
  Rate = 0.01 +/- 0.0007

[Mon Sep 26 23:07:30 2011] Off-axis axis estimate = 7.29'
[Mon Sep 26 23:08:31 2011] Using EEF radius (= 2.36 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 23:08:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 23:08:31 2011] Initial guess for spatial extent in simple fitting = 2.36"
[Mon Sep 26 23:08:31 2011] source mask rpix=4.8, npix_max = 112, mask sum = 121, frac = 1.078
[Mon Sep 26 23:08:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.36"
[Mon Sep 26 23:08:31 2011] fullrun_ccd2_acisf11256_pi14-548_cl_pass0_src1.ximg exists
[Mon Sep 26 23:08:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11256_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 23:08:31 2011] fullrun_ccd2_acisf11256_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Sep 26 23:08:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11256_pi14-548_cl_pass0_src1.csv
[Mon Sep 26 23:08:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11256_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11256_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 23:08:32 2011] fullrun_ccd2_acisf11256_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 23:08:32 2011] fullrun_ccd2_acisf11256_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 23:08:32 2011] Fit fullrun_ccd2_acisf11256_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 23:08:39 2011] Spatial fit model total counts = 215.835000, observed total counts = 216.000000
[Mon Sep 26 23:08:39 2011] Offset between fit and detection position for source 16 = 0.879685 pixels
[Mon Sep 26 23:08:39 2011] 215.940800 total counts/ 36.933800 bgd. counts: snr = 29.454932
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.879685 pixels
  Position = (519.7, 144.4) = 0 43 41.24 40 54 45.9
  Extent = 2.3 (2.0-2.6)", rotation angle = 0
  Source counts = 179.0 +/- 14.7
  Background counts = 36.9
  Rate = 0.009 +/- 0.0007
[Mon Sep 26 23:08:39 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 23:08:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 23:08:39 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 23:08:39 2011] Source does appear to be extended
[Mon Sep 26 23:08:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 23:09:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 23:09:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 23:09:08 2011] Initial guess for spatial extent in simple fitting = 2.27"
[Mon Sep 26 23:09:08 2011] source mask rpix=4.6, npix_max = 104, mask sum = 110, frac = 1.050
[Mon Sep 26 23:09:08 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.27"
[Mon Sep 26 23:09:09 2011] fullrun_ccd2_acisf11256_pi14-548_cl_pass1_src1.ximg exists
[Mon Sep 26 23:09:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11256_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 23:09:09 2011] fullrun_ccd2_acisf11256_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Sep 26 23:09:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11256_pi14-548_cl_pass1_src1.csv
[Mon Sep 26 23:09:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11256_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11256_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 23:09:09 2011] fullrun_ccd2_acisf11256_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 23:09:09 2011] fullrun_ccd2_acisf11256_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 23:09:09 2011] Fit fullrun_ccd2_acisf11256_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 23:09:18 2011] Spatial fit model total counts = 213.841000, observed total counts = 214.000000
[Mon Sep 26 23:09:18 2011] Offset between fit and detection position for source 16 = 0.048912 pixels
[Mon Sep 26 23:09:18 2011] 214.022300 total counts/ 33.958300 bgd. counts: snr = 30.899676
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.048912 pixels
  Position = (519.7, 144.4) = 0 43 41.24 40 54 45.9
  Extent = 2.3 (2.0-2.6)", rotation angle = 0
  Source counts = 180.1 +/- 14.6
  Background counts = 34.0
  Rate = 0.009 +/- 0.0007
[Mon Sep 26 23:09:18 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 23:09:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 23:09:18 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 23:09:18 2011] Source does appear to be extended
[Mon Sep 26 23:09:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 23:11:11 2011] Not overwriting source region fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_src.reg
[Mon Sep 26 23:11:11 2011] Extracting stamp from image fullrun_ccd2_acisf11256_pi14-548_cl_sm2.00.img.gz, (415, 40) - (625, 249)
[Mon Sep 26 23:11:11 2011] Writing fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16.gif
[Mon Sep 26 23:11:12 2011] ../../acisf11256/products/events/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_src.evt and ../../acisf11256/products/events/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Mon Sep 26 23:11:12 2011] Size of ../../acisf11256/products/events/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_src.evt.gz[events] = 211 counts
[Mon Sep 26 23:11:12 2011] Mean chipx,y = (942.34, 849.64)
[Mon Sep 26 23:11:12 2011] Mean tdetx,y = (3910.64, 3143.66)
[Mon Sep 26 23:11:12 2011] chipx,y range = (912.00-975.00, 816.00-877.00)
[Mon Sep 26 23:11:12 2011] Size of ../../acisf11256/products/events/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 78 counts
[Mon Sep 26 23:11:12 2011] ../../acisf11256/products/images/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_src.img and ../../acisf11256/products/images/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Mon Sep 26 23:11:12 2011] ../../acisf11256/products/spectra/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_src.pi and ../../acisf11256/products/spectra/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Mon Sep 26 23:11:15 2011] ../../acisf11256/products/lightcurves/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_src.lc and ../../acisf11256/products/lightcurves/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Mon Sep 26 23:11:46 2011] Keeping rmf generated by specextract
[Mon Sep 26 23:11:46 2011] 160.75
[Mon Sep 26 23:13:09 2011] Updating aperture counts using extracted products
[Mon Sep 26 23:13:09 2011] Error reading totcts from fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_src.pi.gz
[Mon Sep 26 23:13:10 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 23:13:10 2011] Using photon index=1.80, rate=0.00907, arf fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16.arf
[Mon Sep 26 23:13:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 23:13:10 2011] Updating source flux to 1.3e-13
[Mon Sep 26 23:13:19 2011] Reading fit data from acisf11256/analysis//spectral/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_pl.csv
[Mon Sep 26 23:13:19 2011] Spectral fit parameter nH value = 1.51814e+22
[Mon Sep 26 23:13:19 2011] Spectral fit parameter PhoIndex value = 1.95079
[Mon Sep 26 23:13:19 2011] Failed to get F(0.3-8.0) from acisf11256/analysis//spectral/fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 23:13:19 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 23:13:19 2011] Using Nh = 1.5e+22, photon index=1.95, rate=0.00907, arf fullrun_ccd2_acisf11256_pi14-548_pass1_cl_src16.arf
[Mon Sep 26 23:13:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Sep 26 23:13:19 2011] Updating source flux to 1.7e-13