[Tue Jan 24 05:11:33 2012] Detection parameters:
  Position = (917.3, 419.5) = 0 43 2.46 41 12 3.2
  Extent = 1.5" x 0.9", rotation angle = 105 degrees
  Source counts = 23.6 +/- 5.5
  Background counts = 6.4
  Rate = 0.0004 +/- 9e-05

[Tue Jan 24 05:11:34 2012] Off-axis axis estimate = 6.18'
[Tue Jan 24 05:15:27 2012] Using EEF radius (= 1.72 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 05:15:27 2012] Initial guess for spatial extent in simple fitting = 1.72"
[Tue Jan 24 05:15:27 2012] source mask rpix=3.5, npix_max = 63, mask sum = 56, frac = 0.877
[Tue Jan 24 05:15:27 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 1.72"
[Tue Jan 24 06:10:58 2012] fullrun_ccd0_acisf11252_pi14-548_cl_pass0_src20.ximg exists
[Tue Jan 24 06:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11252_pi14-548_cl_pass0_src20.csv
[Tue Jan 24 06:10:58 2012] fullrun_ccd0_acisf11252_pi14-548_cl_pass0_src20_1.ximg exists
[Tue Jan 24 06:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11252_pi14-548_cl_pass0_src20.csv
[Tue Jan 24 06:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11252_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11252_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 06:10:58 2012] fullrun_ccd0_acisf11252_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Tue Jan 24 06:10:58 2012] fullrun_ccd0_acisf11252_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Jan 24 06:10:58 2012] Fit fullrun_ccd0_acisf11252_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Jan 24 15:42:08 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 17.703730 pixels away
[Tue Jan 24 15:42:08 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 15:42:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 15:42:08 2012] Assessing source extent using major
[Tue Jan 24 15:42:08 2012] Source does appear to be extended
[Tue Jan 24 15:42:08 2012] Computing asymmetry using major and minor axis, asym = 1.61
[Tue Jan 24 15:42:08 2012] Source is asymmetric
[Tue Jan 24 15:42:40 2012] Using EEF radius (= 1.72 ")to estimate initial spatial extent for simple fitting
[Tue Jan 24 15:42:40 2012] Initial guess for spatial extent in simple fitting = 1.72"
[Tue Jan 24 15:42:40 2012] source mask rpix=3.5, npix_max = 63, mask sum = 56, frac = 0.877
[Tue Jan 24 15:42:40 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 1.72"
[Tue Jan 24 16:38:02 2012] fullrun_ccd0_acisf11252_pi14-548_cl_pass1_src19.ximg exists
[Tue Jan 24 16:38:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11252_pi14-548_cl_pass1_src19.csv
[Tue Jan 24 16:38:02 2012] fullrun_ccd0_acisf11252_pi14-548_cl_pass1_src19_1.ximg exists
[Tue Jan 24 16:38:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11252_pi14-548_cl_pass1_src19.csv
[Tue Jan 24 16:38:02 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11252_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11252_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 24 16:38:02 2012] fullrun_ccd0_acisf11252_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Tue Jan 24 16:38:02 2012] fullrun_ccd0_acisf11252_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Jan 24 16:38:02 2012] Fit fullrun_ccd0_acisf11252_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Jan 24 22:03:25 2012] Spatial fit model total counts = 39.994700, observed total counts = 40.000000
[Tue Jan 24 22:03:25 2012] Offset between fit and detection position for source 20 = 1.070848 pixels
[Tue Jan 24 22:03:25 2012] 39.722100 total counts/ 19.660400 bgd. counts: snr = 4.524510
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 1.070848 pixels
  Position = (917.6, 420.5) = 0 43 2.47 41 12 3.4
  Extent = 1.0 (0.7-1.6)", rotation angle = 0
  Source counts = 20.1 +/- 6.3
  Background counts = 19.7
  Rate = 0.0003 +/- 0.0001
[Tue Jan 24 22:03:25 2012] Vigneting correction estimate = 1.000000
[Tue Jan 24 22:03:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 24 22:03:25 2012] Assessing source extent using major axis lower bound
[Tue Jan 24 22:03:25 2012] Source does appear to be extended
[Tue Jan 24 22:03:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 24 22:03:54 2012] Writing source region out to fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20_src.reg
[Tue Jan 24 22:03:54 2012] Extracting stamp from image fullrun_ccd0_acisf11252_pi14-548_cl_sm2.00.img.gz, (872, 375) - (964, 467)
[Tue Jan 24 22:03:54 2012] Writing fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20.gif
[Tue Jan 24 22:13:24 2012] Size of ../../acisf11252/products/events/fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20_src.evt.gz[events] = 27 counts
[Tue Jan 24 22:13:24 2012] Mean chipx,y = (821.33, 349.22)
[Tue Jan 24 22:13:24 2012] Mean tdetx,y = (3410.22, 4310.67)
[Tue Jan 24 22:13:24 2012] chipx,y range = (805.00-839.00, 331.00-370.00)
[Tue Jan 24 22:13:24 2012] Size of ../../acisf11252/products/events/fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20_bgd.evt.gz[events] = 65 counts
[Tue Jan 24 22:13:25 2012] Not generating rmf since there are only 20 counts
[Tue Jan 24 22:13:25 2012] arf not found, will run specextract
[Tue Jan 24 22:13:45 2012] ../../acisf11252/products/spectra/fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20.warf not found
[Tue Jan 24 22:13:45 2012] ../../acisf11252/products/spectra/fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20.wrmf not found
[Tue Jan 24 22:13:45 2012] Removal of ../../acisf11252/products/spectra/fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20.soff failed
[Tue Jan 24 22:19:22 2012] Spectrum 20 has only 20 counts, deleting rmf
[Tue Jan 24 22:19:22 2012] 179.163
[Tue Jan 24 23:00:42 2012] Updating aperture counts using extracted products
[Tue Jan 24 23:00:42 2012] Error reading totcts from fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20_src.pi.gz
[Tue Jan 24 23:00:42 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 24 23:00:42 2012] Using photon index=1.80, rate=0.000345, arf fullrun_ccd0_acisf11252_pi14-548_pass1_cl_src20.arf
[Tue Jan 24 23:00:42 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 24 23:00:42 2012] Updating source flux to 4.3e-15
[Tue Jan 24 23:00:48 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting