[Sat Oct  8 23:04:53 2011] Detection parameters:
  Position = (937.2, 472.6) = 17 40 23.46 9 55 27.4
  Extent = 0.6" x 0.5", rotation angle = 166 degrees
  Source counts = 36.0 +/- 6.2
  Background counts = 2.0
  Rate = 0.0006 +/- 0.0001

[Sat Oct  8 23:04:54 2011] Off-axis axis estimate = 3.95'
[Sat Oct  8 23:06:17 2011] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 23:06:17 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Sat Oct  8 23:06:17 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.072
[Sat Oct  8 23:06:17 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.82"
[Sat Oct  8 23:06:18 2011] fullrun_ccd3_acisf11250_pi14-548_cl_pass0_src9.ximg exists
[Sat Oct  8 23:06:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11250_pi14-548_cl_pass0_src9.csv
[Sat Oct  8 23:06:18 2011] fullrun_ccd3_acisf11250_pi14-548_cl_pass0_src9_1.ximg exists
[Sat Oct  8 23:06:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11250_pi14-548_cl_pass0_src9.csv
[Sat Oct  8 23:06:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11250_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11250_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 23:06:19 2011] fullrun_ccd3_acisf11250_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sat Oct  8 23:06:19 2011] fullrun_ccd3_acisf11250_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Oct  8 23:06:19 2011] Fit fullrun_ccd3_acisf11250_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Oct  8 23:06:40 2011] Spatial fit model total counts = 43.999600, observed total counts = 44.000000
[Sat Oct  8 23:06:40 2011] Offset between fit and detection position for source 6 = 0.779523 pixels
[Sat Oct  8 23:06:40 2011] 44.223700 total counts/ 10.864400 bgd. counts: snr = 10.120782
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.779523 pixels
  Position = (937.5, 473.3) = 17 40 23.47 9 55 27.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 33.4 +/- 6.7
  Background counts = 10.9
  Rate = 0.0005 +/- 0.0001
[Sat Oct  8 23:06:40 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 23:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 23:06:40 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 23:06:40 2011] Source does appear to be extended
[Sat Oct  8 23:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 23:07:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 23:07:16 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Oct  8 23:07:16 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.958
[Sat Oct  8 23:07:16 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.62"
[Sat Oct  8 23:07:17 2011] fullrun_ccd3_acisf11250_pi14-548_cl_pass1_src9.ximg exists
[Sat Oct  8 23:07:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11250_pi14-548_cl_pass1_src9.csv
[Sat Oct  8 23:07:17 2011] fullrun_ccd3_acisf11250_pi14-548_cl_pass1_src9_1.ximg exists
[Sat Oct  8 23:07:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11250_pi14-548_cl_pass1_src9.csv
[Sat Oct  8 23:07:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11250_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11250_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 23:07:17 2011] fullrun_ccd3_acisf11250_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sat Oct  8 23:07:17 2011] fullrun_ccd3_acisf11250_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Oct  8 23:07:17 2011] Fit fullrun_ccd3_acisf11250_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Oct  8 23:07:38 2011] Spatial fit model total counts = 43.770600, observed total counts = 44.000000
[Sat Oct  8 23:07:38 2011] Offset between fit and detection position for source 6 = 0.026370 pixels
[Sat Oct  8 23:07:38 2011] 43.734800 total counts/ 10.782100 bgd. counts: snr = 10.035507
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.026370 pixels
  Position = (937.5, 473.3) = 17 40 23.47 9 55 27.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 33.0 +/- 6.6
  Background counts = 10.8
  Rate = 0.0005 +/- 0.0001
[Sat Oct  8 23:07:38 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 23:07:38 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 23:07:38 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 23:07:38 2011] Source does appear to be extended
[Sat Oct  8 23:07:38 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 23:11:09 2011] Not overwriting source region fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_src.reg
[Sat Oct  8 23:11:09 2011] Extracting stamp from image fullrun_ccd3_acisf11250_pi14-548_cl_sm2.00.img.gz, (909, 445) - (966, 501)
[Sat Oct  8 23:11:09 2011] Writing fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6.gif
[Sat Oct  8 23:11:36 2011] ../../acisf11250/products/events/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_src.evt and ../../acisf11250/products/events/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sat Oct  8 23:11:36 2011] Size of ../../acisf11250/products/events/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_src.evt.gz[events] = 37 counts
[Sat Oct  8 23:11:36 2011] Mean chipx,y = (397.46, 885.86)
[Sat Oct  8 23:11:36 2011] Mean tdetx,y = (4246.14, 3458.46)
[Sat Oct  8 23:11:36 2011] chipx,y range = (381.00-416.00, 866.00-904.00)
[Sat Oct  8 23:11:36 2011] Size of ../../acisf11250/products/events/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 14 counts
[Sat Oct  8 23:11:36 2011] ../../acisf11250/products/images/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_src.img and ../../acisf11250/products/images/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sat Oct  8 23:11:36 2011] ../../acisf11250/products/spectra/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_src.pi and ../../acisf11250/products/spectra/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sat Oct  8 23:11:36 2011] Not generating rmf since there are only 32 counts
[Sat Oct  8 23:11:39 2011] ../../acisf11250/products/lightcurves/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_src.lc and ../../acisf11250/products/lightcurves/fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sat Oct  8 23:12:30 2011] 185.553
[Sat Oct  8 23:13:08 2011] Updating aperture counts using extracted products
[Sat Oct  8 23:13:08 2011] Error reading totcts from fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6_src.pi.gz
[Sat Oct  8 23:13:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 23:13:08 2011] Using photon index=1.80, rate=0.000517, arf fullrun_ccd3_acisf11250_pi14-548_pass1_cl_src6.arf
[Sat Oct  8 23:13:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 23:13:08 2011] Updating source flux to 6.3e-15
[Sat Oct  8 23:13:34 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting