[Sat Oct  8 23:04:50 2011] Detection parameters:
  Position = (525.7, 542.6) = 17 40 2.50 9 56 40.2
  Extent = 1.2" x 0.7", rotation angle = 25 degrees
  Source counts = 797.2 +/- 28.5
  Background counts = 15.8
  Rate = 0.01 +/- 0.0004

[Sat Oct  8 23:04:52 2011] Off-axis axis estimate = 5.04'
[Sat Oct  8 23:06:15 2011] Using EEF radius (= 1.20 ")to estimate initial spatial extent for simple fitting
[Sat Oct  8 23:06:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 23:06:15 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Sat Oct  8 23:06:15 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.046
[Sat Oct  8 23:06:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.20"
[Sat Oct  8 23:06:16 2011] fullrun_ccd2_acisf11250_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  8 23:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11250_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 23:06:16 2011] fullrun_ccd2_acisf11250_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  8 23:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11250_pi14-548_cl_pass0_src1.csv
[Sat Oct  8 23:06:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11250_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11250_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 23:06:16 2011] fullrun_ccd2_acisf11250_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  8 23:06:16 2011] fullrun_ccd2_acisf11250_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  8 23:06:16 2011] Fit fullrun_ccd2_acisf11250_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  8 23:06:36 2011] Spatial fit model total counts = 812.795000, observed total counts = 813.000000
[Sat Oct  8 23:06:36 2011] Offset between fit and detection position for source 4 = 0.860400 pixels
[Sat Oct  8 23:06:36 2011] 815.059000 total counts/ 108.502000 bgd. counts: snr = 67.831017
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.860400 pixels
  Position = (526.4, 543.1) = 17 40 2.49 9 56 40.2
  Extent = 1.0 (0.9-1.1)", rotation angle = 0
  Source counts = 706.6 +/- 28.5
  Background counts = 108.5
  Rate = 0.01 +/- 0.0004
[Sat Oct  8 23:06:37 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 23:06:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 23:06:37 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 23:06:37 2011] Source does appear to be extended
[Sat Oct  8 23:06:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 23:07:13 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  8 23:07:13 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  8 23:07:13 2011] Initial guess for spatial extent in simple fitting = 1.02"
[Sat Oct  8 23:07:13 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.946
[Sat Oct  8 23:07:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.02"
[Sat Oct  8 23:07:14 2011] fullrun_ccd2_acisf11250_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  8 23:07:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11250_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 23:07:14 2011] fullrun_ccd2_acisf11250_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  8 23:07:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11250_pi14-548_cl_pass1_src1.csv
[Sat Oct  8 23:07:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11250_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11250_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  8 23:07:14 2011] fullrun_ccd2_acisf11250_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  8 23:07:14 2011] fullrun_ccd2_acisf11250_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  8 23:07:14 2011] Fit fullrun_ccd2_acisf11250_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  8 23:07:35 2011] Spatial fit model total counts = 802.142000, observed total counts = 804.000000
[Sat Oct  8 23:07:35 2011] Offset between fit and detection position for source 4 = 0.069713 pixels
[Sat Oct  8 23:07:35 2011] 803.329000 total counts/ 135.669000 bgd. counts: snr = 57.321170
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.069713 pixels
  Position = (526.5, 543.0) = 17 40 2.49 9 56 40.2
  Extent = 1.0 (0.9-1.0)", rotation angle = 0
  Source counts = 667.7 +/- 28.3
  Background counts = 135.7
  Rate = 0.01 +/- 0.0004
[Sat Oct  8 23:07:35 2011] Vigneting correction estimate = 1.000000
[Sat Oct  8 23:07:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  8 23:07:35 2011] Assessing source extent using major axis lower bound
[Sat Oct  8 23:07:35 2011] Source does appear to be extended
[Sat Oct  8 23:07:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  8 23:09:53 2011] Not overwriting source region fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_src.reg
[Sat Oct  8 23:09:53 2011] Extracting stamp from image fullrun_ccd2_acisf11250_pi14-548_cl_sm2.00.img.gz, (483, 500) - (570, 587)
[Sat Oct  8 23:09:53 2011] Writing fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4.gif
[Sat Oct  8 23:09:56 2011] ../../acisf11250/products/events/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_src.evt and ../../acisf11250/products/events/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Sat Oct  8 23:09:56 2011] Size of ../../acisf11250/products/events/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_src.evt.gz[events] = 775 counts
[Sat Oct  8 23:09:56 2011] Mean chipx,y = (528.47, 543.02)
[Sat Oct  8 23:09:56 2011] Mean tdetx,y = (3604.02, 3557.53)
[Sat Oct  8 23:09:56 2011] chipx,y range = (504.00-546.00, 521.00-567.00)
[Sat Oct  8 23:09:56 2011] Size of ../../acisf11250/products/events/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 46 counts
[Sat Oct  8 23:09:56 2011] ../../acisf11250/products/images/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_src.img and ../../acisf11250/products/images/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Sat Oct  8 23:09:56 2011] ../../acisf11250/products/spectra/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_src.pi and ../../acisf11250/products/spectra/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Sat Oct  8 23:09:59 2011] ../../acisf11250/products/lightcurves/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_src.lc and ../../acisf11250/products/lightcurves/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Sat Oct  8 23:11:07 2011] Keeping rmf generated by specextract
[Sat Oct  8 23:11:08 2011] 164.709
[Sat Oct  8 23:13:07 2011] Updating aperture counts using extracted products
[Sat Oct  8 23:13:07 2011] Error reading totcts from fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Oct  8 23:13:08 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 23:13:08 2011] Using photon index=1.80, rate=0.0105, arf fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4.arf
[Sat Oct  8 23:13:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 23:13:08 2011] Updating source flux to 1.4e-13
[Sat Oct  8 23:13:34 2011] Reading fit data from acisf11250/analysis//spectral/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_pl.csv
[Sat Oct  8 23:13:34 2011] Spectral fit parameter nH value = 1.67757e+21
[Sat Oct  8 23:13:34 2011] Spectral fit parameter PhoIndex value = 2.20537
[Sat Oct  8 23:13:34 2011] Failed to get F(0.3-8.0) from acisf11250/analysis//spectral/fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sat Oct  8 23:13:34 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  8 23:13:34 2011] Using Nh = 1.7e+21, photon index=2.21, rate=0.0105, arf fullrun_ccd2_acisf11250_pi14-548_pass1_cl_src4.arf
[Sat Oct  8 23:13:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  8 23:13:34 2011] Updating source flux to 1.3e-13