[Wed Oct 19 03:15:23 2011] Detection parameters:
  Position = (860.9, 572.5) = 3 57 47.51 32 3 45.2
  Extent = 0.6" x 0.5", rotation angle = 22 degrees
  Source counts = 524.1 +/- 23.1
  Background counts = 8.9
  Rate = 0.01 +/- 0.0005

[Wed Oct 19 03:15:25 2011] Off-axis axis estimate = 3.33'
[Wed Oct 19 03:16:30 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 03:16:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 03:16:30 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Wed Oct 19 03:16:30 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.902
[Wed Oct 19 03:16:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.65"
[Wed Oct 19 03:16:30 2011] fullrun_ccd7_acisf11239_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 03:16:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11239_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 03:16:30 2011] fullrun_ccd7_acisf11239_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 03:16:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11239_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 03:16:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11239_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11239_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 03:16:31 2011] fullrun_ccd7_acisf11239_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 03:16:31 2011] fullrun_ccd7_acisf11239_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 03:16:31 2011] Fit fullrun_ccd7_acisf11239_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 03:16:40 2011] Spatial fit model total counts = 534.610000, observed total counts = 534.000000
[Wed Oct 19 03:16:40 2011] Offset between fit and detection position for source 2 = 0.743740 pixels
[Wed Oct 19 03:16:40 2011] 534.579900 total counts/ 21.258900 bgd. counts: snr = 111.331648
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.743740 pixels
  Position = (861.4, 573.0) = 3 57 47.51 32 3 45.2
  Extent = 0.7 (0.7-0.7)", rotation angle = 0
  Source counts = 513.3 +/- 23.1
  Background counts = 21.3
  Rate = 0.01 +/- 0.0005
[Wed Oct 19 03:16:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 03:16:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 03:16:40 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 03:16:40 2011] Source does appear to be extended
[Wed Oct 19 03:16:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 03:16:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 03:16:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 03:16:56 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Wed Oct 19 03:16:56 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.814
[Wed Oct 19 03:16:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.70"
[Wed Oct 19 03:16:57 2011] fullrun_ccd7_acisf11239_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 03:16:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11239_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 03:16:57 2011] fullrun_ccd7_acisf11239_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 03:16:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11239_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 03:16:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11239_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11239_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 03:16:57 2011] fullrun_ccd7_acisf11239_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 03:16:57 2011] fullrun_ccd7_acisf11239_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 03:16:57 2011] Fit fullrun_ccd7_acisf11239_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 03:17:05 2011] Spatial fit model total counts = 537.967000, observed total counts = 534.000000
[Wed Oct 19 03:17:05 2011] Offset between fit and detection position for source 2 = 0.011264 pixels
[Wed Oct 19 03:17:05 2011] 536.242100 total counts/ 20.954100 bgd. counts: snr = 112.568148
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011264 pixels
  Position = (861.4, 573.0) = 3 57 47.51 32 3 45.2
  Extent = 0.7 (0.7-0.7)", rotation angle = 0
  Source counts = 515.3 +/- 23.2
  Background counts = 21.0
  Rate = 0.01 +/- 0.0005
[Wed Oct 19 03:17:05 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 03:17:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 03:17:05 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 03:17:05 2011] Source does appear to be extended
[Wed Oct 19 03:17:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 03:18:01 2011] Not overwriting source region fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 19 03:18:01 2011] Extracting stamp from image fullrun_ccd7_acisf11239_pi14-548_cl_sm2.00.img.gz, (830, 541) - (893, 605)
[Wed Oct 19 03:18:01 2011] Writing fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2.gif
[Wed Oct 19 03:18:03 2011] ../../acisf11239/products/events/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_src.evt and ../../acisf11239/products/events/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct 19 03:18:03 2011] Size of ../../acisf11239/products/events/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_src.evt.gz[events] = 526 counts
[Wed Oct 19 03:18:03 2011] Mean chipx,y = (550.44, 314.26)
[Wed Oct 19 03:18:03 2011] Mean tdetx,y = (4467.44, 2016.26)
[Wed Oct 19 03:18:03 2011] chipx,y range = (531.00-570.00, 291.00-334.00)
[Wed Oct 19 03:18:03 2011] Size of ../../acisf11239/products/events/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 52 counts
[Wed Oct 19 03:18:03 2011] ../../acisf11239/products/images/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_src.img and ../../acisf11239/products/images/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct 19 03:18:03 2011] ../../acisf11239/products/spectra/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_src.pi and ../../acisf11239/products/spectra/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct 19 03:18:05 2011] ../../acisf11239/products/lightcurves/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_src.lc and ../../acisf11239/products/lightcurves/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct 19 03:19:07 2011] Keeping rmf generated by specextract
[Wed Oct 19 03:19:07 2011] 226.748
[Wed Oct 19 03:19:09 2011] Updating aperture counts using extracted products
[Wed Oct 19 03:19:09 2011] Error reading totcts from fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 19 03:19:10 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 03:19:10 2011] Using photon index=1.80, rate=0.0111, arf fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2.arf
[Wed Oct 19 03:19:10 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 03:19:10 2011] Updating source flux to 8.6e-14
[Wed Oct 19 03:19:34 2011] Reading fit data from acisf11239/analysis//spectral/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_pl.csv
[Wed Oct 19 03:19:34 2011] Spectral fit parameter nH value = 9.27732e+20
[Wed Oct 19 03:19:34 2011] Spectral fit parameter PhoIndex value = 1.5474
[Wed Oct 19 03:19:34 2011] Failed to get F(0.3-8.0) from acisf11239/analysis//spectral/fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 03:19:34 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 03:19:34 2011] Using Nh = 9.3e+20, photon index=1.55, rate=0.0111, arf fullrun_ccd7_acisf11239_pi14-548_pass1_cl_src2.arf
[Wed Oct 19 03:19:34 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 03:19:34 2011] Updating source flux to 9.9e-14