[Wed Oct 19 03:15:22 2011] Detection parameters:
  Position = (718.4, 1187.4) = 3 57 32.64 32 16 12.5
  Extent = 3.6" x 3.1", rotation angle = 92 degrees
  Source counts = 228.5 +/- 18.2
  Background counts = 101.5
  Rate = 0.005 +/- 0.0004

[Wed Oct 19 03:15:23 2011] Off-axis axis estimate = 9.60'
[Wed Oct 19 03:16:29 2011] Using EEF radius (= 4.08 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 03:16:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 03:16:29 2011] Initial guess for spatial extent in simple fitting = 4.08"
[Wed Oct 19 03:16:29 2011] source mask rpix=8.3, npix_max = 308, mask sum = 289, frac = 0.936
[Wed Oct 19 03:16:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.08"
[Wed Oct 19 03:16:29 2011] fullrun_ccd6_acisf11239_pi14-548_cl_pass0_src1.ximg exists
[Wed Oct 19 03:16:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11239_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 03:16:29 2011] fullrun_ccd6_acisf11239_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Oct 19 03:16:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11239_pi14-548_cl_pass0_src1.csv
[Wed Oct 19 03:16:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11239_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11239_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 03:16:29 2011] fullrun_ccd6_acisf11239_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct 19 03:16:29 2011] fullrun_ccd6_acisf11239_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct 19 03:16:29 2011] Fit fullrun_ccd6_acisf11239_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct 19 03:16:37 2011] Spatial fit model total counts = 355.346000, observed total counts = 352.000000
[Wed Oct 19 03:16:37 2011] Offset between fit and detection position for source 1 = 2.810725 pixels
[Wed Oct 19 03:16:37 2011] 354.927300 total counts/ 92.525300 bgd. counts: snr = 27.279530
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.810725 pixels
  Position = (718.8, 1190.2) = 3 57 32.64 32 16 13.6
  Extent = 5.8 (4.9-7.0)", rotation angle = 0
  Source counts = 262.4 +/- 18.8
  Background counts = 92.5
  Rate = 0.006 +/- 0.0004
[Wed Oct 19 03:16:37 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 03:16:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 03:16:37 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 03:16:37 2011] Source does appear to be extended
[Wed Oct 19 03:16:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 03:16:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 19 03:16:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 03:16:55 2011] Initial guess for spatial extent in simple fitting = 5.81"
[Wed Oct 19 03:16:55 2011] source mask rpix=11.8, npix_max = 605, mask sum = 600, frac = 0.991
[Wed Oct 19 03:16:55 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.81"
[Wed Oct 19 03:16:56 2011] fullrun_ccd6_acisf11239_pi14-548_cl_pass1_src1.ximg exists
[Wed Oct 19 03:16:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11239_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 03:16:56 2011] fullrun_ccd6_acisf11239_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Oct 19 03:16:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11239_pi14-548_cl_pass1_src1.csv
[Wed Oct 19 03:16:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11239_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11239_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 19 03:16:56 2011] fullrun_ccd6_acisf11239_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct 19 03:16:56 2011] fullrun_ccd6_acisf11239_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct 19 03:16:56 2011] Fit fullrun_ccd6_acisf11239_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct 19 03:17:02 2011] Spatial fit model total counts = 441.876000, observed total counts = 443.000000
[Wed Oct 19 03:17:02 2011] Offset between fit and detection position for source 1 = 0.704266 pixels
[Wed Oct 19 03:17:02 2011] 441.676000 total counts/ 167.994000 bgd. counts: snr = 21.115402
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.704266 pixels
  Position = (719.0, 1189.5) = 3 57 32.63 32 16 13.3
  Extent = 6.0 (5.3-6.7)", rotation angle = 0
  Source counts = 273.7 +/- 21.0
  Background counts = 168.0
  Rate = 0.006 +/- 0.0005
[Wed Oct 19 03:17:02 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 03:17:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 03:17:02 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 03:17:02 2011] Source does appear to be extended
[Wed Oct 19 03:17:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 19 03:17:28 2011] Not overwriting source region fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_src.reg
[Wed Oct 19 03:17:28 2011] Extracting stamp from image fullrun_ccd6_acisf11239_pi14-548_cl_sm2.00.img.gz, (446, 916) - (992, 1411)
[Wed Oct 19 03:17:28 2011] Writing fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1.gif
[Wed Oct 19 03:17:29 2011] ../../acisf11239/products/events/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_src.evt and ../../acisf11239/products/events/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct 19 03:17:29 2011] Size of ../../acisf11239/products/events/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_src.evt.gz[events] = 411 counts
[Wed Oct 19 03:17:29 2011] Mean chipx,y = (85.59, 748.01)
[Wed Oct 19 03:17:29 2011] Mean tdetx,y = (2960.59, 2450.01)
[Wed Oct 19 03:17:29 2011] chipx,y range = (30.00-141.00, 690.00-805.00)
[Wed Oct 19 03:17:29 2011] Size of ../../acisf11239/products/events/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1135 counts
[Wed Oct 19 03:17:29 2011] ../../acisf11239/products/images/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_src.img and ../../acisf11239/products/images/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct 19 03:17:29 2011] ../../acisf11239/products/spectra/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_src.pi and ../../acisf11239/products/spectra/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct 19 03:17:32 2011] ../../acisf11239/products/lightcurves/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_src.lc and ../../acisf11239/products/lightcurves/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct 19 03:18:01 2011] Keeping rmf generated by specextract
[Wed Oct 19 03:18:01 2011] 166.693
[Wed Oct 19 03:19:09 2011] Updating aperture counts using extracted products
[Wed Oct 19 03:19:09 2011] Error reading totcts from fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct 19 03:19:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 03:19:09 2011] Using photon index=1.80, rate=0.00588, arf fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 03:19:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 03:19:09 2011] Updating source flux to 7.2e-14
[Wed Oct 19 03:19:29 2011] Reading fit data from acisf11239/analysis//spectral/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_pl.csv
[Wed Oct 19 03:19:29 2011] Spectral fit parameter nH value = 1.26006e+21
[Wed Oct 19 03:19:29 2011] Spectral fit parameter PhoIndex value = 1.42828
[Wed Oct 19 03:19:29 2011] Failed to get F(0.3-8.0) from acisf11239/analysis//spectral/fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct 19 03:19:29 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 19 03:19:29 2011] Using Nh = 1.3e+21, photon index=1.43, rate=0.00588, arf fullrun_ccd6_acisf11239_pi14-548_pass1_cl_src1.arf
[Wed Oct 19 03:19:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 19 03:19:29 2011] Updating source flux to 8.6e-14