[Fri Sep 23 16:19:50 2011] Detection parameters:
  Position = (769.9, 452.4) = 20 21 2.24 40 34 42.1
  Extent = 3.3" x 2.9", rotation angle = 23 degrees
  Source counts = 128.5 +/- 13.5
  Background counts = 54.5
  Rate = 0.002 +/- 0.0002

[Fri Sep 23 16:19:51 2011] Off-axis axis estimate = 10.10'
[Fri Sep 23 16:21:09 2011] Using EEF radius (= 4.52 ")to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:21:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 16:21:09 2011] Initial guess for spatial extent in simple fitting = 4.52"
[Fri Sep 23 16:21:09 2011] source mask rpix=9.2, npix_max = 375, mask sum = 380, frac = 1.012
[Fri Sep 23 16:21:09 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.52"
[Fri Sep 23 16:21:09 2011] fullrun_ccd3_acisf11235_pi14-548_cl_pass0_src1.ximg exists
[Fri Sep 23 16:21:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11235_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 16:21:09 2011] fullrun_ccd3_acisf11235_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Sep 23 16:21:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11235_pi14-548_cl_pass0_src1.csv
[Fri Sep 23 16:21:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11235_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11235_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 16:21:09 2011] fullrun_ccd3_acisf11235_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 23 16:21:09 2011] fullrun_ccd3_acisf11235_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 23 16:21:09 2011] Fit fullrun_ccd3_acisf11235_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 23 16:21:18 2011] Spatial fit model total counts = 248.999000, observed total counts = 249.000000
[Fri Sep 23 16:21:18 2011] Offset between fit and detection position for source 1 = 1.316569 pixels
[Fri Sep 23 16:21:18 2011] 249.395000 total counts/ 109.199000 bgd. counts: snr = 13.416100
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.316569 pixels
  Position = (771.1, 453.0) = 20 21 2.21 40 34 42.1
  Extent = 4.5 (3.9-5.2)", rotation angle = 0
  Source counts = 140.2 +/- 15.8
  Background counts = 109.2
  Rate = 0.003 +/- 0.0003
[Fri Sep 23 16:21:18 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 16:21:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 16:21:18 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 16:21:18 2011] Source does appear to be extended
[Fri Sep 23 16:21:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:21:50 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 23 16:21:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep 23 16:21:50 2011] Initial guess for spatial extent in simple fitting = 4.54"
[Fri Sep 23 16:21:50 2011] source mask rpix=9.2, npix_max = 379, mask sum = 400, frac = 1.055
[Fri Sep 23 16:21:50 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.54"
[Fri Sep 23 16:21:52 2011] fullrun_ccd3_acisf11235_pi14-548_cl_pass1_src1.ximg exists
[Fri Sep 23 16:21:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11235_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 16:21:52 2011] fullrun_ccd3_acisf11235_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Sep 23 16:21:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11235_pi14-548_cl_pass1_src1.csv
[Fri Sep 23 16:21:52 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11235_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11235_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 23 16:21:53 2011] fullrun_ccd3_acisf11235_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 23 16:21:53 2011] fullrun_ccd3_acisf11235_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 23 16:21:53 2011] Fit fullrun_ccd3_acisf11235_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 23 16:22:04 2011] Spatial fit model total counts = 249.314000, observed total counts = 250.000000
[Fri Sep 23 16:22:04 2011] Offset between fit and detection position for source 1 = 0.104437 pixels
[Fri Sep 23 16:22:04 2011] 249.720000 total counts/ 110.961000 bgd. counts: snr = 13.172736
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.104437 pixels
  Position = (771.2, 452.9) = 20 21 2.21 40 34 42.1
  Extent = 4.5 (3.9-5.2)", rotation angle = 0
  Source counts = 138.8 +/- 15.8
  Background counts = 111.0
  Rate = 0.003 +/- 0.0003
[Fri Sep 23 16:22:04 2011] Vigneting correction estimate = 1.000000
[Fri Sep 23 16:22:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 23 16:22:04 2011] Assessing source extent using major axis lower bound
[Fri Sep 23 16:22:04 2011] Source does appear to be extended
[Fri Sep 23 16:22:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 23 16:22:47 2011] Not overwriting source region fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_src.reg
[Fri Sep 23 16:22:47 2011] Extracting stamp from image fullrun_ccd3_acisf11235_pi14-548_cl_sm2.00.img.gz, (565, 247) - (977, 659)
[Fri Sep 23 16:22:47 2011] Writing fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1.gif
[Fri Sep 23 16:22:48 2011] ../../acisf11235/products/events/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_src.evt and ../../acisf11235/products/events/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Sep 23 16:22:48 2011] Size of ../../acisf11235/products/events/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_src.evt.gz[events] = 222 counts
[Fri Sep 23 16:22:48 2011] Mean chipx,y = (336.22, 712.13)
[Fri Sep 23 16:22:48 2011] Mean tdetx,y = (4419.87, 3397.22)
[Fri Sep 23 16:22:48 2011] chipx,y range = (293.00-382.00, 668.00-757.00)
[Fri Sep 23 16:22:48 2011] Size of ../../acisf11235/products/events/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 822 counts
[Fri Sep 23 16:22:48 2011] ../../acisf11235/products/images/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_src.img and ../../acisf11235/products/images/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Sep 23 16:22:48 2011] ../../acisf11235/products/spectra/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_src.pi and ../../acisf11235/products/spectra/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Sep 23 16:22:53 2011] ../../acisf11235/products/lightcurves/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_src.lc and ../../acisf11235/products/lightcurves/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Sep 23 16:23:17 2011] Keeping rmf generated by specextract
[Fri Sep 23 16:23:17 2011] 163.323
[Fri Sep 23 16:27:04 2011] Updating aperture counts using extracted products
[Fri Sep 23 16:27:04 2011] Error reading totcts from fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Sep 23 16:27:04 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 16:27:04 2011] Using photon index=1.80, rate=0.00252, arf fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 16:27:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 16:27:04 2011] Updating source flux to 4.6e-14
[Fri Sep 23 16:27:20 2011] Reading fit data from acisf11235/analysis//spectral/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_pl.csv
[Fri Sep 23 16:27:20 2011] Spectral fit parameter nH value = 8.35814e+21
[Fri Sep 23 16:27:20 2011] Spectral fit parameter PhoIndex value = 0.743113
[Fri Sep 23 16:27:20 2011] Failed to get F(0.3-8.0) from acisf11235/analysis//spectral/fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 23 16:27:20 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 23 16:27:20 2011] Using Nh = 8.4e+21, photon index=0.74, rate=0.00252, arf fullrun_ccd3_acisf11235_pi14-548_pass1_cl_src1.arf
[Fri Sep 23 16:27:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 23 16:27:20 2011] Updating source flux to 6.5e-14