[Fri Sep 30 19:57:23 2011] Detection parameters:
  Position = (915.6, 1062.3) = 18 44 49.95 -3 0 16.3
  Extent = 1.1" x 1.0", rotation angle = 125 degrees
  Source counts = 16.4 +/- 4.4
  Background counts = 2.6
  Rate = 0.0006 +/- 0.0001

[Fri Sep 30 19:57:23 2011] Off-axis axis estimate = 6.71'
[Fri Sep 30 19:58:13 2011] Using EEF radius (= 2.01 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 19:58:13 2011] Initial guess for spatial extent in simple fitting = 2.01"
[Fri Sep 30 19:58:13 2011] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.961
[Fri Sep 30 19:58:13 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 2.01"
[Fri Sep 30 19:58:14 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src7.ximg exists
[Fri Sep 30 19:58:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src7.csv
[Fri Sep 30 19:58:14 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Sep 30 19:58:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src7.csv
[Fri Sep 30 19:58:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:58:14 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Sep 30 19:58:14 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Sep 30 19:58:14 2011] Fit fullrun_ccd3_acisf11232_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Sep 30 19:58:22 2011] Spatial fit model total counts = 26.086400, observed total counts = 27.000000
[Fri Sep 30 19:58:22 2011] Offset between fit and detection position for source 6 = 1.056744 pixels
[Fri Sep 30 19:58:22 2011] 27.335900 total counts/ 14.596400 bgd. counts: snr = 3.334491
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.056744 pixels
  Position = (916.6, 1062.5) = 18 44 49.93 -3 0 16.4
  Extent = 0.8 (0.5-1.4)", rotation angle = 0
  Source counts = 12.7 +/- 5.2
  Background counts = 14.6
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 19:58:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 19:58:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 19:58:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 19:58:22 2011] Source does appear to be extended
[Fri Sep 30 19:58:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 19:58:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 19:58:41 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Fri Sep 30 19:58:41 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.165
[Fri Sep 30 19:58:41 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.77"
[Fri Sep 30 19:58:42 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src7.ximg exists
[Fri Sep 30 19:58:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src7.csv
[Fri Sep 30 19:58:42 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Sep 30 19:58:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src7.csv
[Fri Sep 30 19:58:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:58:42 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Sep 30 19:58:42 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Sep 30 19:58:42 2011] Fit fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Sep 30 19:58:49 2011] Spatial fit model total counts = 19.853700, observed total counts = 20.000000
[Fri Sep 30 19:58:49 2011] Offset between fit and detection position for source 6 = 0.136016 pixels
[Fri Sep 30 19:58:49 2011] 20.225380 total counts/ 7.187380 bgd. counts: snr = 4.863240
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.136016 pixels
  Position = (916.7, 1062.4) = 18 44 49.93 -3 0 16.5
  Extent = 0.8 (0.4-1.4)", rotation angle = 0
  Source counts = 13.0 +/- 4.5
  Background counts = 7.2
  Rate = 0.0004 +/- 0.0002
[Fri Sep 30 19:58:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 19:58:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 19:58:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 19:58:49 2011] Source does appear to be extended
[Fri Sep 30 19:58:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:01:07 2011] Not overwriting source region fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_src.reg
[Fri Sep 30 20:01:07 2011] Extracting stamp from image fullrun_ccd3_acisf11232_pi14-548_cl_sm2.00.img.gz, (880, 1026) - (953, 1099)
[Fri Sep 30 20:01:07 2011] Writing fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6.gif
[Fri Sep 30 20:01:26 2011] ../../acisf11232/products/events/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_src.evt and ../../acisf11232/products/events/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Sep 30 20:01:26 2011] Size of ../../acisf11232/products/events/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_src.evt.gz[events] = 17 counts
[Fri Sep 30 20:01:26 2011] Mean chipx,y = (905.41, 208.88)
[Fri Sep 30 20:01:26 2011] Mean tdetx,y = (4923.12, 3966.41)
[Fri Sep 30 20:01:26 2011] chipx,y range = (887.00-920.00, 187.00-223.00)
[Fri Sep 30 20:01:26 2011] Size of ../../acisf11232/products/events/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 17 counts
[Fri Sep 30 20:01:26 2011] ../../acisf11232/products/images/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_src.img and ../../acisf11232/products/images/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Sep 30 20:01:26 2011] ../../acisf11232/products/spectra/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_src.pi and ../../acisf11232/products/spectra/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Sep 30 20:01:26 2011] Not generating rmf since there are only 13 counts
[Fri Sep 30 20:01:31 2011] ../../acisf11232/products/lightcurves/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_src.lc and ../../acisf11232/products/lightcurves/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Sep 30 20:01:38 2011] 180.506
[Fri Sep 30 20:01:44 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:01:44 2011] Error reading totcts from fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Sep 30 20:01:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:01:44 2011] Using photon index=1.80, rate=0.000442, arf fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src6.arf
[Fri Sep 30 20:01:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:01:44 2011] Updating source flux to 8.3e-15
[Fri Sep 30 20:01:52 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting