[Fri Sep 30 19:57:22 2011] Detection parameters:
  Position = (1192.5, 559.9) = 18 44 40.85 -3 4 23.5
  Extent = 0.5" x 0.5", rotation angle = 138 degrees
  Source counts = 18.1 +/- 4.4
  Background counts = 0.9
  Rate = 0.0006 +/- 0.0001

[Fri Sep 30 19:57:23 2011] Off-axis axis estimate = 2.10'
[Fri Sep 30 19:58:13 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 19:58:13 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 19:58:13 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.156
[Fri Sep 30 19:58:13 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.44"
[Fri Sep 30 19:58:14 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src6.ximg exists
[Fri Sep 30 19:58:14 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src6_1.ximg exists
[Fri Sep 30 19:58:14 2011] Fit fullrun_ccd3_acisf11232_pi14-548_cl_pass0_src6 appears to have run properly
[Fri Sep 30 19:58:14 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Fri Sep 30 19:58:14 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Sep 30 19:58:14 2011] Fit fullrun_ccd3_acisf11232_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Sep 30 19:58:22 2011] Spatial fit model total counts = 18.454100, observed total counts = 20.000000
[Fri Sep 30 19:58:22 2011] Offset between fit and detection position for source 2 = 0.695864 pixels
[Fri Sep 30 19:58:22 2011] 18.372054 total counts/ 0.078254 bgd. counts: snr = 65.395962
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.695864 pixels
  Position = (1192.8, 560.5) = 18 44 40.86 -3 4 23.4
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 18.3 +/- 4.3
  Background counts = 0.1
  Rate = 0.0006 +/- 0.0001
[Fri Sep 30 19:58:22 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 19:58:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 19:58:22 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 19:58:22 2011] Source does appear to be extended
[Fri Sep 30 19:58:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 19:58:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 19:58:41 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Fri Sep 30 19:58:41 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.146
[Fri Sep 30 19:58:41 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.44"
[Fri Sep 30 19:58:42 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src6.ximg exists
[Fri Sep 30 19:58:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src6.csv
[Fri Sep 30 19:58:42 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src6_1.ximg exists
[Fri Sep 30 19:58:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src6.csv
[Fri Sep 30 19:58:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11232_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:58:42 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Fri Sep 30 19:58:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src6.csv
[Fri Sep 30 19:58:42 2011] fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Sep 30 19:58:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src6.csv
[Fri Sep 30 19:58:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11232_pi14-548_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:58:49 2011] Spatial fit model total counts = 17.636000, observed total counts = 21.000000
[Fri Sep 30 19:58:49 2011] Offset between fit and detection position for source 2 = 0.039725 pixels
[Fri Sep 30 19:58:49 2011] 18.024617 total counts/ 0.594217 bgd. counts: snr = 22.611783
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.039725 pixels
  Position = (1192.8, 560.6) = 18 44 40.86 -3 4 23.4
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 17.4 +/- 4.2
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0001
[Fri Sep 30 19:58:49 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 19:58:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 19:58:49 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 19:58:49 2011] Source does appear to be extended
[Fri Sep 30 19:58:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:01:07 2011] Not overwriting source region fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_src.reg
[Fri Sep 30 20:01:07 2011] Extracting stamp from image fullrun_ccd3_acisf11232_pi14-548_cl_sm2.00.img.gz, (1171, 539) - (1214, 582)
[Fri Sep 30 20:01:07 2011] Writing fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2.gif
[Fri Sep 30 20:01:23 2011] ../../acisf11232/products/events/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_src.evt and ../../acisf11232/products/events/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Fri Sep 30 20:01:23 2011] Size of ../../acisf11232/products/events/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_src.evt.gz[events] = 18 counts
[Fri Sep 30 20:01:23 2011] Mean chipx,y = (995.78, 772.72)
[Fri Sep 30 20:01:23 2011] Mean tdetx,y = (4359.28, 4056.78)
[Fri Sep 30 20:01:23 2011] chipx,y range = (983.00-1014.00, 755.00-788.00)
[Fri Sep 30 20:01:23 2011] Size of ../../acisf11232/products/events/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 6 counts
[Fri Sep 30 20:01:23 2011] ../../acisf11232/products/images/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_src.img and ../../acisf11232/products/images/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Fri Sep 30 20:01:23 2011] ../../acisf11232/products/spectra/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_src.pi and ../../acisf11232/products/spectra/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Fri Sep 30 20:01:23 2011] Not generating rmf since there are only 17 counts
[Fri Sep 30 20:01:26 2011] ../../acisf11232/products/lightcurves/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_src.lc and ../../acisf11232/products/lightcurves/fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Fri Sep 30 20:01:37 2011] 202.508
[Fri Sep 30 20:01:44 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:01:44 2011] Error reading totcts from fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2_src.pi.gz
[Fri Sep 30 20:01:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:01:44 2011] Using photon index=1.80, rate=0.000591, arf fullrun_ccd3_acisf11232_pi14-548_pass1_cl_src2.arf
[Fri Sep 30 20:01:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Sep 30 20:01:44 2011] Updating source flux to 1e-14
[Fri Sep 30 20:01:52 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting