[Thu Sep 29 08:26:51 2011] Detection parameters:
  Position = (1101.3, 651.5) = 6 16 10.66 -21 23 46.2
  Extent = 0.5" x 0.5", rotation angle = 35 degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.4
  Rate = 0.001 +/- 0.0003

[Thu Sep 29 08:26:53 2011] Off-axis axis estimate = 1.89'
[Thu Sep 29 08:28:11 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 08:28:11 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Thu Sep 29 08:28:11 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.230
[Thu Sep 29 08:28:11 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.42"
[Thu Sep 29 08:28:13 2011] fullrun_ccd7_acisf11228_pi14-548_cl_pass0_src20.ximg exists
[Thu Sep 29 08:28:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11228_pi14-548_cl_pass0_src20.csv
[Thu Sep 29 08:28:13 2011] fullrun_ccd7_acisf11228_pi14-548_cl_pass0_src20_1.ximg exists
[Thu Sep 29 08:28:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11228_pi14-548_cl_pass0_src20.csv
[Thu Sep 29 08:28:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11228_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11228_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 08:28:13 2011] fullrun_ccd7_acisf11228_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Thu Sep 29 08:28:13 2011] fullrun_ccd7_acisf11228_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Sep 29 08:28:13 2011] Fit fullrun_ccd7_acisf11228_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Sep 29 08:28:21 2011] Spatial fit model total counts = 13.722100, observed total counts = 14.000000
[Thu Sep 29 08:28:21 2011] Offset between fit and detection position for source 26 = 0.683495 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.683495 pixels
  Position = (1101.8, 651.9) = 6 16 10.66 -21 23 46.3
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 13.7 +/- 3.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu Sep 29 08:28:21 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 08:28:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 08:28:21 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 08:28:21 2011] Source does appear to be extended
[Thu Sep 29 08:28:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 08:28:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 08:28:41 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Thu Sep 29 08:28:41 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.032
[Thu Sep 29 08:28:41 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.48"
[Thu Sep 29 08:28:43 2011] fullrun_ccd7_acisf11228_pi14-548_cl_pass1_src20.ximg exists
[Thu Sep 29 08:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11228_pi14-548_cl_pass1_src20.csv
[Thu Sep 29 08:28:43 2011] fullrun_ccd7_acisf11228_pi14-548_cl_pass1_src20_1.ximg exists
[Thu Sep 29 08:28:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11228_pi14-548_cl_pass1_src20.csv
[Thu Sep 29 08:28:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11228_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11228_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 08:28:44 2011] fullrun_ccd7_acisf11228_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Thu Sep 29 08:28:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11228_pi14-548_cl_pass1_tfrozen_src20.csv
[Thu Sep 29 08:28:44 2011] fullrun_ccd7_acisf11228_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Sep 29 08:28:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11228_pi14-548_cl_pass1_tfrozen_src20.csv
[Thu Sep 29 08:28:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11228_pi14-548_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11228_pi14-548_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 08:28:51 2011] Spatial fit model total counts = 12.916900, observed total counts = 14.000000
[Thu Sep 29 08:28:51 2011] Offset between fit and detection position for source 26 = 0.082403 pixels
[Thu Sep 29 08:28:51 2011] 12.917100 total counts/ 0.000000 bgd. counts: snr = 15761916.823108
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.082403 pixels
  Position = (1101.8, 652.0) = 6 16 10.66 -21 23 46.2
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 12.9 +/- 3.6
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu Sep 29 08:28:51 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 08:28:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 08:28:51 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 08:28:51 2011] Source does appear to be extended
[Thu Sep 29 08:28:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 08:30:25 2011] Not overwriting source region fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_src.reg
[Thu Sep 29 08:30:25 2011] Extracting stamp from image fullrun_ccd7_acisf11228_pi14-548_cl_sm2.00.img.gz, (1079, 629) - (1125, 675)
[Thu Sep 29 08:30:25 2011] Writing fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26.gif
[Thu Sep 29 08:32:34 2011] ../../acisf11228/products/events/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_src.evt and ../../acisf11228/products/events/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_bgd.evt exist, delete to re-create
[Thu Sep 29 08:32:34 2011] Size of ../../acisf11228/products/events/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_src.evt.gz[events] = 14 counts
[Thu Sep 29 08:32:34 2011] Mean chipx,y = (181.64, 266.00)
[Thu Sep 29 08:32:34 2011] Mean tdetx,y = (4098.64, 1968.00)
[Thu Sep 29 08:32:34 2011] chipx,y range = (167.00-198.00, 252.00-285.00)
[Thu Sep 29 08:32:34 2011] Size of ../../acisf11228/products/events/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 4 counts
[Thu Sep 29 08:32:34 2011] ../../acisf11228/products/images/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_src.img and ../../acisf11228/products/images/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_bgd.img exist, delete to re-create
[Thu Sep 29 08:32:34 2011] ../../acisf11228/products/spectra/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_src.pi and ../../acisf11228/products/spectra/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_bgd.pi exist, delete to re-create
[Thu Sep 29 08:32:34 2011] Not generating rmf since there are only 12 counts
[Thu Sep 29 08:32:41 2011] ../../acisf11228/products/lightcurves/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_src.lc and ../../acisf11228/products/lightcurves/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_bgd.lc exist, delete to re-create
[Thu Sep 29 08:34:53 2011] 230.48
[Thu Sep 29 08:34:57 2011] Updating aperture counts using extracted products
[Thu Sep 29 08:34:57 2011] Error reading totcts from fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_src.pi.gz
[Thu Sep 29 08:34:57 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 08:34:57 2011] Using photon index=1.80, rate=0.001, arf fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26.arf
[Thu Sep 29 08:34:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 08:34:58 2011] Updating source flux to 7.8e-15
[Thu Sep 29 08:35:07 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep 29 08:35:08 2011] acisf11228/analysis//spectral/fullrun_ccd7_acisf11228_pi14-548_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete