[Tue Oct 25 22:50:44 2011] Detection parameters:
  Position = (1060.9, 815.5) = 21 42 18.59 12 31 57.3
  Extent = 1.0" x 0.5", rotation angle = 38 degrees
  Source counts = 15.3 +/- 4.0
  Background counts = 0.7
  Rate = 0.002 +/- 0.0004

[Tue Oct 25 22:50:45 2011] Off-axis axis estimate = 2.54'
[Tue Oct 25 22:51:15 2011] Using EEF radius (= 0.50 ")to estimate initial spatial extent for simple fitting
[Tue Oct 25 22:51:15 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Tue Oct 25 22:51:15 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.983
[Tue Oct 25 22:51:15 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.50"
[Tue Oct 25 22:51:16 2011] fullrun_ccd7_acisf11227_pi14-548_cl_pass0_src9.ximg exists
[Tue Oct 25 22:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11227_pi14-548_cl_pass0_src9.csv
[Tue Oct 25 22:51:16 2011] fullrun_ccd7_acisf11227_pi14-548_cl_pass0_src9_1.ximg exists
[Tue Oct 25 22:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11227_pi14-548_cl_pass0_src9.csv
[Tue Oct 25 22:51:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11227_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11227_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 22:51:16 2011] fullrun_ccd7_acisf11227_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Tue Oct 25 22:51:16 2011] fullrun_ccd7_acisf11227_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Oct 25 22:51:16 2011] Fit fullrun_ccd7_acisf11227_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Oct 25 22:51:20 2011] Spatial fit model total counts = 14.427200, observed total counts = 17.000000
[Tue Oct 25 22:51:20 2011] Offset between fit and detection position for source 10 = 0.119104 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.119104 pixels
  Position = (1060.9, 815.6) = 21 42 18.61 12 31 57.1
  Extent = 1.2 (0.8-1.5)" x 0.3 (0.2-0.5)", rotation angle = 140 (129-151) degrees
  Source counts = 15.5 +/- 3.9
  Background counts = 0.0
  Rate = 0.002 +/- 0.0004
[Tue Oct 25 22:51:20 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 22:51:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 22:51:20 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 22:51:20 2011] Source does appear to be extended
[Tue Oct 25 22:51:20 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.61
[Tue Oct 25 22:51:20 2011] Source is asymmetric
[Tue Oct 25 22:51:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 25 22:51:34 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Oct 25 22:51:34 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.944
[Tue Oct 25 22:51:34 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.77"
[Tue Oct 25 22:51:36 2011] fullrun_ccd7_acisf11227_pi14-548_cl_pass1_src9.ximg exists
[Tue Oct 25 22:51:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11227_pi14-548_cl_pass1_src9.csv
[Tue Oct 25 22:51:36 2011] fullrun_ccd7_acisf11227_pi14-548_cl_pass1_src9_1.ximg exists
[Tue Oct 25 22:51:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11227_pi14-548_cl_pass1_src9.csv
[Tue Oct 25 22:51:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11227_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11227_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 25 22:51:36 2011] fullrun_ccd7_acisf11227_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Tue Oct 25 22:51:36 2011] fullrun_ccd7_acisf11227_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Oct 25 22:51:36 2011] Fit fullrun_ccd7_acisf11227_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Oct 25 22:51:44 2011] Spatial fit model total counts = 16.674900, observed total counts = 17.000000
[Tue Oct 25 22:51:44 2011] Offset between fit and detection position for source 10 = 0.057587 pixels
[Tue Oct 25 22:51:44 2011] 17.226670 total counts/ 7.779270 bgd. counts: snr = 3.387216
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.057587 pixels
  Position = (1060.8, 815.6) = 21 42 18.61 12 31 57.1
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 9.4 +/- 4.2
  Background counts = 7.8
  Rate = 0.0009 +/- 0.0004
[Tue Oct 25 22:51:44 2011] Vigneting correction estimate = 1.000000
[Tue Oct 25 22:51:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 25 22:51:44 2011] Assessing source extent using major axis lower bound
[Tue Oct 25 22:51:44 2011] Source does appear to be extended
[Tue Oct 25 22:51:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 25 22:52:36 2011] Not overwriting source region fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_src.reg
[Tue Oct 25 22:52:36 2011] Extracting stamp from image fullrun_ccd7_acisf11227_pi14-548_cl_sm2.00.img.gz, (1047, 802) - (1075, 830)
[Tue Oct 25 22:52:36 2011] Writing fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10.gif
[Tue Oct 25 22:53:00 2011] ../../acisf11227/products/events/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_src.evt and ../../acisf11227/products/events/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue Oct 25 22:53:00 2011] Size of ../../acisf11227/products/events/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_src.evt.gz[events] = 10 counts
[Tue Oct 25 22:53:00 2011] Mean chipx,y = (137.40, 805.80)
[Tue Oct 25 22:53:00 2011] Mean tdetx,y = (4054.40, 2507.80)
[Tue Oct 25 22:53:00 2011] chipx,y range = (122.00-152.00, 790.00-822.00)
[Tue Oct 25 22:53:00 2011] Size of ../../acisf11227/products/events/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 5 counts
[Tue Oct 25 22:53:00 2011] ../../acisf11227/products/images/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_src.img and ../../acisf11227/products/images/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue Oct 25 22:53:00 2011] ../../acisf11227/products/spectra/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_src.pi and ../../acisf11227/products/spectra/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue Oct 25 22:53:00 2011] Not generating rmf since there are only 9 counts
[Tue Oct 25 22:53:02 2011] ../../acisf11227/products/lightcurves/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_src.lc and ../../acisf11227/products/lightcurves/fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue Oct 25 22:53:17 2011] 226.417
[Tue Oct 25 22:53:19 2011] Updating aperture counts using extracted products
[Tue Oct 25 22:53:19 2011] Error reading totcts from fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10_src.pi.gz
[Tue Oct 25 22:53:19 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 25 22:53:19 2011] Using photon index=1.80, rate=0.00094, arf fullrun_ccd7_acisf11227_pi14-548_pass1_cl_src10.arf
[Tue Oct 25 22:53:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 25 22:53:19 2011] Updating source flux to 7.3e-15
[Tue Oct 25 22:53:25 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting