[Fri Oct 14 15:32:53 2011] Detection parameters:
  Position = (406.4, 283.4) = 19 7 29.25 6 7 13.1
  Extent = 1.3" x 0.9", rotation angle = 32 degrees
  Source counts = 12.2 +/- 3.7
  Background counts = 1.8
  Rate = 0.0006 +/- 0.0002

[Fri Oct 14 15:32:53 2011] Off-axis axis estimate = 8.28'
[Fri Oct 14 15:33:37 2011] Using EEF radius (= 3.03 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:33:37 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 15:33:37 2011] Initial guess for spatial extent in simple fitting = 3.03"
[Fri Oct 14 15:33:37 2011] source mask rpix=6.2, npix_max = 177, mask sum = 169, frac = 0.954
[Fri Oct 14 15:33:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.03"
[Fri Oct 14 15:33:37 2011] fullrun_ccd3_acisf11124_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 15:33:37 2011] fullrun_ccd3_acisf11124_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 15:33:37 2011] Fit fullrun_ccd3_acisf11124_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Oct 14 15:33:37 2011] fullrun_ccd3_acisf11124_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 15:33:37 2011] fullrun_ccd3_acisf11124_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 15:33:37 2011] Fit fullrun_ccd3_acisf11124_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 15:33:41 2011] Spatial fit model total counts = 30.188200, observed total counts = 30.000000
[Fri Oct 14 15:33:41 2011] Offset between fit and detection position for source 1 = 0.986885 pixels
[Fri Oct 14 15:33:41 2011] 29.962200 total counts/ 18.363400 bgd. counts: snr = 2.706677
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.986885 pixels
  Position = (406.3, 284.4) = 19 7 29.27 6 7 13.3
  Extent = 1.5 (0.8-2.5)", rotation angle = 339
  Source counts = 11.6 +/- 5.5
  Background counts = 18.4
  Rate = 0.0006 +/- 0.0003
[Fri Oct 14 15:33:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 15:33:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 15:33:41 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 15:33:41 2011] Source does appear to be extended
[Fri Oct 14 15:33:41 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76
[Fri Oct 14 15:33:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 15:33:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 15:33:54 2011] Initial guess for spatial extent in simple fitting = 1.15"
[Fri Oct 14 15:33:54 2011] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.930
[Fri Oct 14 15:33:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.15"
[Fri Oct 14 15:33:54 2011] fullrun_ccd3_acisf11124_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 15:33:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11124_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 15:33:54 2011] fullrun_ccd3_acisf11124_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 15:33:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11124_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 15:33:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11124_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11124_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 15:33:54 2011] fullrun_ccd3_acisf11124_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 15:33:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11124_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Oct 14 15:33:54 2011] fullrun_ccd3_acisf11124_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 15:33:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11124_pi14-548_cl_pass1_tfrozen_src1.csv
[Fri Oct 14 15:33:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11124_pi14-548_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11124_pi14-548_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 15:33:59 2011] Spatial fit model total counts = 9.510530, observed total counts = 15.000000
[Fri Oct 14 15:33:59 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct 14 15:33:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 15:33:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 15:33:59 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 15:33:59 2011] Source does appear to be extended
[Fri Oct 14 15:33:59 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.76
[Fri Oct 14 15:34:15 2011] Not overwriting source region fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 14 15:34:15 2011] Extracting stamp from image fullrun_ccd3_acisf11124_pi14-548_cl_sm2.00.img.gz, (336, 214) - (477, 355)
[Fri Oct 14 15:34:15 2011] Writing fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1.gif
[Fri Oct 14 15:34:15 2011] ../../acisf11124/products/events/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_src.evt and ../../acisf11124/products/events/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 14 15:34:15 2011] Size of ../../acisf11124/products/events/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_src.evt.gz[events] = 12 counts
[Fri Oct 14 15:34:15 2011] Mean chipx,y = (111.17, 769.67)
[Fri Oct 14 15:34:15 2011] Mean tdetx,y = (4362.33, 3172.17)
[Fri Oct 14 15:34:15 2011] chipx,y range = (103.00-136.00, 751.00-782.00)
[Fri Oct 14 15:34:15 2011] Size of ../../acisf11124/products/events/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 43 counts
[Fri Oct 14 15:34:15 2011] ../../acisf11124/products/images/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_src.img and ../../acisf11124/products/images/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 14 15:34:15 2011] ../../acisf11124/products/spectra/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_src.pi and ../../acisf11124/products/spectra/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 14 15:34:15 2011] Not generating rmf since there are only 11 counts
[Fri Oct 14 15:34:22 2011] ../../acisf11124/products/lightcurves/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_src.lc and ../../acisf11124/products/lightcurves/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 14 15:34:26 2011] 171.435
[Fri Oct 14 15:35:52 2011] Updating aperture counts using extracted products
[Fri Oct 14 15:35:52 2011] Error reading totcts from fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 14 15:35:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 15:35:52 2011] Using photon index=1.80, rate=0.000614, arf fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 15:35:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 15:35:52 2011] Updating source flux to 1.1e-14
[Fri Oct 14 15:35:54 2011] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Oct 14 15:35:54 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 15:35:55 2011] acisf11124/analysis//spectral/fullrun_ccd3_acisf11124_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete