[Thu Oct  6 03:53:08 2011] Detection parameters:
  Position = (536.9, 936.3) = 6 33 44.14 6 32 30.4
  Extent = 0.5" x 0.5", rotation angle = 105 degrees
  Source counts = 341.6 +/- 18.6
  Background counts = 4.4
  Rate = 0.02 +/- 0.0009

[Thu Oct  6 03:53:09 2011] Off-axis axis estimate = 0.28'
[Thu Oct  6 03:53:49 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 03:53:49 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Thu Oct  6 03:53:49 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.854
[Thu Oct  6 03:53:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.41"
[Thu Oct  6 03:53:49 2011] fullrun_ccd7_acisf11123_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct  6 03:53:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11123_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 03:53:49 2011] fullrun_ccd7_acisf11123_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct  6 03:53:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11123_pi14-548_cl_pass0_src1.csv
[Thu Oct  6 03:53:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11123_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11123_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 03:53:50 2011] fullrun_ccd7_acisf11123_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct  6 03:53:50 2011] fullrun_ccd7_acisf11123_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct  6 03:53:50 2011] Fit fullrun_ccd7_acisf11123_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct  6 03:53:55 2011] Spatial fit model total counts = 349.954000, observed total counts = 350.000000
[Thu Oct  6 03:53:55 2011] Offset between fit and detection position for source 3 = 0.718266 pixels
[Thu Oct  6 03:53:55 2011] 350.843400 total counts/ 27.467400 bgd. counts: snr = 61.701967
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.718266 pixels
  Position = (537.4, 936.8) = 6 33 44.14 6 32 30.4
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 323.4 +/- 18.7
  Background counts = 27.5
  Rate = 0.02 +/- 0.0009
[Thu Oct  6 03:53:55 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 03:53:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 03:53:55 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 03:53:55 2011] Source does appear to be extended
[Thu Oct  6 03:53:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 03:54:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 03:54:14 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Oct  6 03:54:14 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.859
[Thu Oct  6 03:54:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.40"
[Thu Oct  6 03:54:14 2011] fullrun_ccd7_acisf11123_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct  6 03:54:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11123_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 03:54:14 2011] fullrun_ccd7_acisf11123_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct  6 03:54:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11123_pi14-548_cl_pass1_src1.csv
[Thu Oct  6 03:54:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11123_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11123_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 03:54:14 2011] fullrun_ccd7_acisf11123_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct  6 03:54:14 2011] fullrun_ccd7_acisf11123_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct  6 03:54:14 2011] Fit fullrun_ccd7_acisf11123_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct  6 03:54:21 2011] Spatial fit model total counts = 347.837000, observed total counts = 348.000000
[Thu Oct  6 03:54:21 2011] Offset between fit and detection position for source 3 = 0.002714 pixels
[Thu Oct  6 03:54:21 2011] 347.812300 total counts/ 24.093300 bgd. counts: snr = 65.950797
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.002714 pixels
  Position = (537.4, 936.8) = 6 33 44.14 6 32 30.4
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 323.7 +/- 18.6
  Background counts = 24.1
  Rate = 0.02 +/- 0.0009
[Thu Oct  6 03:54:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 03:54:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 03:54:21 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 03:54:21 2011] Source does appear to be extended
[Thu Oct  6 03:54:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 03:55:45 2011] Not overwriting source region fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_src.reg
[Thu Oct  6 03:55:45 2011] Extracting stamp from image fullrun_ccd7_acisf11123_pi14-548_cl_sm2.00.img.gz, (519, 918) - (556, 955)
[Thu Oct  6 03:55:45 2011] Writing fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3.gif
[Thu Oct  6 03:55:46 2011] ../../acisf11123/products/events/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_src.evt and ../../acisf11123/products/events/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Thu Oct  6 03:55:46 2011] Size of ../../acisf11123/products/events/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_src.evt.gz[events] = 332 counts
[Thu Oct  6 03:55:46 2011] Mean chipx,y = (221.52, 514.06)
[Thu Oct  6 03:55:46 2011] Mean tdetx,y = (4138.52, 2216.06)
[Thu Oct  6 03:55:46 2011] chipx,y range = (202.00-240.00, 495.00-532.00)
[Thu Oct  6 03:55:46 2011] Size of ../../acisf11123/products/events/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Thu Oct  6 03:55:46 2011] ../../acisf11123/products/images/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_src.img and ../../acisf11123/products/images/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Thu Oct  6 03:55:46 2011] ../../acisf11123/products/spectra/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_src.pi and ../../acisf11123/products/spectra/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Thu Oct  6 03:55:50 2011] ../../acisf11123/products/lightcurves/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_src.lc and ../../acisf11123/products/lightcurves/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Thu Oct  6 03:56:39 2011] Keeping rmf generated by specextract
[Thu Oct  6 03:56:39 2011] 235.345
[Thu Oct  6 03:56:42 2011] Updating aperture counts using extracted products
[Thu Oct  6 03:56:42 2011] Error reading totcts from fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Oct  6 03:56:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:56:42 2011] Using photon index=1.80, rate=0.0163, arf fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3.arf
[Thu Oct  6 03:56:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 03:56:42 2011] Updating source flux to 1.6e-13
[Thu Oct  6 03:56:52 2011] Reading fit data from acisf11123/analysis//spectral/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_pl.csv
[Thu Oct  6 03:56:52 2011] Spectral fit parameter nH value = 1.26342e+13
[Thu Oct  6 03:56:52 2011] Spectral fit parameter PhoIndex value = 3.20833
[Thu Oct  6 03:56:52 2011] Failed to get F(0.3-8.0) from acisf11123/analysis//spectral/fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Oct  6 03:56:52 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 03:56:52 2011] Using Nh = 1.3e+13, photon index=3.21, rate=0.0163, arf fullrun_ccd7_acisf11123_pi14-548_pass1_cl_src3.arf
[Thu Oct  6 03:56:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 03:56:52 2011] Updating source flux to 1.2e-13