[Wed Dec 28 05:11:58 2011] Detection parameters:
  Position = (638.5, 596.4) = 4 58 14.91 -2 31 51.5
  Extent = 0.5" x 0.5", rotation angle = 133 degrees
  Source counts = 41.1 +/- 6.5
  Background counts = 0.9
  Rate = 0.002 +/- 0.0003

[Wed Dec 28 05:11:58 2011] Off-axis axis estimate = 1.76'
[Wed Dec 28 05:45:10 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 05:45:10 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Wed Dec 28 05:45:10 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.270
[Wed Dec 28 05:45:10 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.41"
[Wed Dec 28 05:57:25 2011] fullrun_ccd7_acisf11106_pi14-548_cl_pass0_src3.ximg exists
[Wed Dec 28 05:57:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11106_pi14-548_cl_pass0_src3.csv
[Wed Dec 28 05:57:25 2011] fullrun_ccd7_acisf11106_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Dec 28 05:57:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11106_pi14-548_cl_pass0_src3.csv
[Wed Dec 28 05:57:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11106_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11106_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:57:25 2011] fullrun_ccd7_acisf11106_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Dec 28 05:57:25 2011] fullrun_ccd7_acisf11106_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Dec 28 05:57:25 2011] Fit fullrun_ccd7_acisf11106_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Dec 28 05:57:30 2011] Spatial fit model total counts = 39.687200, observed total counts = 43.000000
[Wed Dec 28 05:57:30 2011] Offset between fit and detection position for source 4 = 0.740465 pixels
[Wed Dec 28 05:57:30 2011] 39.610508 total counts/ 0.047408 bgd. counts: snr = 181.703429
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.740465 pixels
  Position = (639.0, 597.0) = 4 58 14.92 -2 31 51.4
  Extent = 0.5 (0.3-0.5)", rotation angle = 0
  Source counts = 39.6 +/- 6.3
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Wed Dec 28 05:57:30 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:57:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:57:30 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 05:57:30 2011] Source does appear to be extended
[Wed Dec 28 05:57:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 06:28:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 06:28:37 2011] Initial guess for spatial extent in simple fitting = 0.46"
[Wed Dec 28 06:28:37 2011] source mask rpix=0.9, npix_max = 8, mask sum = 4, frac = 0.482
[Wed Dec 28 06:28:37 2011] Skipping simple spatial due to low active detector fraction
[Wed Dec 28 06:37:32 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 06:37:32 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 06:37:32 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 06:37:32 2011] Source does appear to be extended
[Wed Dec 28 06:37:32 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 06:46:34 2011] Writing source region out to fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4_src.reg
[Wed Dec 28 06:46:34 2011] Extracting stamp from image fullrun_ccd7_acisf11106_pi14-548_cl_sm2.00.img.gz, (618, 576) - (660, 618)
[Wed Dec 28 06:46:34 2011] Writing fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4.gif
[Wed Dec 28 06:47:08 2011] Size of ../../acisf11106/products/events/fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4_src.evt.gz[events] = 41 counts
[Wed Dec 28 06:47:08 2011] Mean chipx,y = (393.15, 569.10)
[Wed Dec 28 06:47:08 2011] Mean tdetx,y = (4310.15, 2271.10)
[Wed Dec 28 06:47:08 2011] chipx,y range = (377.00-412.00, 552.00-585.00)
[Wed Dec 28 06:47:08 2011] Size of ../../acisf11106/products/events/fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 3 counts
[Wed Dec 28 06:47:09 2011] Not generating rmf since there are only 39 counts
[Wed Dec 28 06:47:09 2011] arf not found, will run specextract
[Wed Dec 28 06:47:17 2011] ../../acisf11106/products/spectra/fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4.warf not found
[Wed Dec 28 06:47:17 2011] ../../acisf11106/products/spectra/fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4.wrmf not found
[Wed Dec 28 06:47:17 2011] Removal of ../../acisf11106/products/spectra/fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4.soff failed
[Wed Dec 28 06:52:10 2011] Spectrum 4 has only 40 counts, deleting rmf
[Wed Dec 28 06:52:10 2011] 233.229
[Wed Dec 28 06:52:12 2011] Updating aperture counts using extracted products
[Wed Dec 28 06:52:12 2011] Error reading totcts from fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Dec 28 06:52:12 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 06:52:12 2011] Using photon index=1.80, rate=0.002, arf fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4.arf
[Wed Dec 28 06:52:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Dec 28 06:52:12 2011] Updating source flux to 1.5e-14
[Wed Dec 28 06:52:21 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Dec 28 06:52:22 2011] acisf11106/analysis//spectral/fullrun_ccd7_acisf11106_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete