[Wed Nov 23 05:28:16 2011] Detection parameters:
  Position = (801.9, 154.8) = 12 14 50.36 -65 38 19.8
  Extent = 2.4" x 1.0", rotation angle = 2 degrees
  Source counts = 18.8 +/- 5.3
  Background counts = 9.2
  Rate = 0.0002 +/- 6e-05

[Wed Nov 23 05:28:17 2011] Off-axis axis estimate = 10.10'
[Wed Nov 23 07:57:57 2011] Using EEF radius (= 4.52 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 07:57:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 07:57:57 2011] Initial guess for spatial extent in simple fitting = 4.52"
[Wed Nov 23 07:57:57 2011] source mask rpix=9.2, npix_max = 375, mask sum = 308, frac = 0.820
[Wed Nov 23 07:57:57 2011] Giving source the simple spatial ID 55 for pass 0, mean size = 4.52"
[Wed Nov 23 09:02:19 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src55.ximg exists
[Wed Nov 23 09:02:19 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src55.csv
[Wed Nov 23 09:02:19 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src55_1.ximg exists
[Wed Nov 23 09:02:19 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src55.csv
[Wed Nov 23 09:02:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 09:02:19 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass0_tfrozen_src55.ximg exists
[Wed Nov 23 09:02:19 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass0_tfrozen_src55_1.ximg exists
[Wed Nov 23 09:02:19 2011] Fit fullrun_ccd3_acisf11101_pi14-548_cl_pass0_tfrozen_src55 appears to have run properly
[Wed Nov 23 09:02:50 2011] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 52.181335 pixels away
[Wed Nov 23 09:02:50 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 09:02:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 09:02:50 2011] Assessing source extent using major
[Wed Nov 23 09:02:50 2011] Source does appear to be extended
[Wed Nov 23 09:02:50 2011] Computing asymmetry using major and minor axis, asym = 2.51
[Wed Nov 23 09:02:50 2011] Source is asymmetric
[Wed Nov 23 10:47:08 2011] Using EEF radius (= 4.52 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 10:47:08 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Nov 23 10:47:08 2011] Initial guess for spatial extent in simple fitting = 4.52"
[Wed Nov 23 10:47:08 2011] source mask rpix=9.2, npix_max = 375, mask sum = 308, frac = 0.820
[Wed Nov 23 10:47:08 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 4.52"
[Wed Nov 23 11:53:13 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src49.ximg exists
[Wed Nov 23 11:53:13 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src49.csv
[Wed Nov 23 11:53:13 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src49_1.ximg exists
[Wed Nov 23 11:53:13 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src49.csv
[Wed Nov 23 11:53:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 11:53:13 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Wed Nov 23 11:53:13 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Wed Nov 23 11:53:13 2011] Fit fullrun_ccd3_acisf11101_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Wed Nov 23 11:53:37 2011] Spatial fit model total counts = 104.991000, observed total counts = 108.000000
[Wed Nov 23 11:53:37 2011] Offset between fit and detection position for source 35 = 4.059967 pixels
[Wed Nov 23 11:53:37 2011] 105.286200 total counts/ 75.008200 bgd. counts: snr = 3.496011
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 4.059967 pixels
  Position = (806.0, 155.3) = 12 14 50.08 -65 38 19.8
  Extent = 2.7 (1.5-3.8)", rotation angle = 0
  Source counts = 30.3 +/- 10.3
  Background counts = 75.0
  Rate = 0.0003 +/- 0.0001
[Wed Nov 23 11:53:37 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 11:53:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 11:53:37 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 11:53:37 2011] Source does appear to be extended
[Wed Nov 23 11:53:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 12:45:50 2011] Writing source region out to fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35_src.reg
[Wed Nov 23 12:45:50 2011] Extracting stamp from image fullrun_ccd3_acisf11101_pi14-548_cl_sm2.00.img.gz, (681, 30) - (931, 280)
[Wed Nov 23 12:45:50 2011] Writing fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35.gif
[Wed Nov 23 13:13:41 2011] Size of ../../acisf11101/products/events/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35_src.evt.gz[events] = 48 counts
[Wed Nov 23 13:13:41 2011] Mean chipx,y = (15.75, 226.42)
[Wed Nov 23 13:13:41 2011] Mean tdetx,y = (4905.58, 3076.75)
[Wed Nov 23 13:13:41 2011] chipx,y range = (2.00-42.00, 194.00-258.00)
[Wed Nov 23 13:13:41 2011] Size of ../../acisf11101/products/events/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35_bgd.evt.gz[events] = 193 counts
[Wed Nov 23 13:13:42 2011] Not generating rmf since there are only 30 counts
[Wed Nov 23 13:13:42 2011] arf not found, will run specextract
[Wed Nov 23 13:14:01 2011] ../../acisf11101/products/spectra/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35.warf not found
[Wed Nov 23 13:14:01 2011] ../../acisf11101/products/spectra/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35.wrmf not found
[Wed Nov 23 13:14:01 2011] Removal of ../../acisf11101/products/spectra/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35.soff failed
[Wed Nov 23 13:16:11 2011] Spectrum 35 has only 30 counts, deleting rmf
[Wed Nov 23 13:16:11 2011] 81.417
[Wed Nov 23 13:16:19 2011] Updating aperture counts using extracted products
[Wed Nov 23 13:16:19 2011] Error reading totcts from fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35_src.pi.gz
[Wed Nov 23 13:16:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 23 13:16:19 2011] Using photon index=1.80, rate=0.000341, arf fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src35.arf
[Wed Nov 23 13:16:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov 23 13:16:20 2011] Updating source flux to 1.1e-14
[Wed Nov 23 13:17:36 2011] Source 35 has fewer than 100.000000 counts, skipping spectral fitting