[Wed Nov 23 05:28:16 2011] Detection parameters:
  Position = (565.4, 1133.9) = 12 15 9.05 -65 30 18.0
  Extent = 0.5" x 0.5", rotation angle = 102 degrees
  Source counts = 94.3 +/- 10.1
  Background counts = 8.7
  Rate = 0.001 +/- 0.0001

[Wed Nov 23 05:28:17 2011] Off-axis axis estimate = 3.19'
[Wed Nov 23 07:57:57 2011] Using EEF radius (= 0.62 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 07:57:57 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Wed Nov 23 07:57:57 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.971
[Wed Nov 23 07:57:57 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 0.62"
[Wed Nov 23 09:02:18 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src4.ximg exists
[Wed Nov 23 09:02:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src4.csv
[Wed Nov 23 09:02:18 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Nov 23 09:02:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src4.csv
[Wed Nov 23 09:02:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11101_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 09:02:19 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Nov 23 09:02:19 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Nov 23 09:02:19 2011] Fit fullrun_ccd3_acisf11101_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Nov 23 09:02:50 2011] Spatial fit model total counts = 120.820000, observed total counts = 121.000000
[Wed Nov 23 09:02:50 2011] Offset between fit and detection position for source 1 = 0.667671 pixels
[Wed Nov 23 09:02:50 2011] 119.652800 total counts/ 26.219100 bgd. counts: snr = 18.247134
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.667671 pixels
  Position = (565.9, 1134.4) = 12 15 9.05 -65 30 18.0
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 93.4 +/- 10.9
  Background counts = 26.2
  Rate = 0.001 +/- 0.0001
[Wed Nov 23 09:02:50 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 09:02:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 09:02:50 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 09:02:50 2011] Source does appear to be extended
[Wed Nov 23 09:02:50 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 10:47:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 23 10:47:08 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Wed Nov 23 10:47:08 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.854
[Wed Nov 23 10:47:08 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 0.55"
[Wed Nov 23 11:53:12 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src4.ximg exists
[Wed Nov 23 11:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src4.csv
[Wed Nov 23 11:53:12 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src4_1.ximg exists
[Wed Nov 23 11:53:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src4.csv
[Wed Nov 23 11:53:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11101_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 11:53:13 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Wed Nov 23 11:53:13 2011] fullrun_ccd3_acisf11101_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Nov 23 11:53:13 2011] Fit fullrun_ccd3_acisf11101_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Nov 23 11:53:37 2011] Warning, spatial fit 4 centroid is now closest to src. 13
[Wed Nov 23 11:53:37 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 11:53:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 11:53:37 2011] Assessing source extent using major axis lower bound
[Wed Nov 23 11:53:37 2011] Source does appear to be extended
[Wed Nov 23 11:53:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 23 12:45:49 2011] Writing source region out to fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1_src.reg
[Wed Nov 23 12:45:49 2011] Extracting stamp from image fullrun_ccd3_acisf11101_pi14-548_cl_sm2.00.img.gz, (541, 1109) - (591, 1160)
[Wed Nov 23 12:45:50 2011] Writing fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1.gif
[Wed Nov 23 12:47:30 2011] Size of ../../acisf11101/products/events/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1_src.evt.gz[events] = 102 counts
[Wed Nov 23 12:47:30 2011] Mean chipx,y = (930.12, 639.95)
[Wed Nov 23 12:47:30 2011] Mean tdetx,y = (4492.05, 3991.12)
[Wed Nov 23 12:47:30 2011] chipx,y range = (912.00-949.00, 622.00-659.00)
[Wed Nov 23 12:47:31 2011] Size of ../../acisf11101/products/events/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 83 counts
[Wed Nov 23 12:47:32 2011] Not generating rmf since there are only 93 counts
[Wed Nov 23 12:47:32 2011] arf not found, will run specextract
[Wed Nov 23 12:48:01 2011] ../../acisf11101/products/spectra/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1.warf not found
[Wed Nov 23 12:48:01 2011] ../../acisf11101/products/spectra/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1.wrmf not found
[Wed Nov 23 12:48:01 2011] Removal of ../../acisf11101/products/spectra/fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1.soff failed
[Wed Nov 23 13:16:11 2011] Spectrum 1 has only 93 counts, deleting rmf
[Wed Nov 23 13:16:11 2011] 197.707
[Wed Nov 23 13:16:18 2011] Updating aperture counts using extracted products
[Wed Nov 23 13:16:18 2011] Error reading totcts from fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Nov 23 13:16:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 23 13:16:19 2011] Using photon index=1.80, rate=0.00105, arf fullrun_ccd3_acisf11101_pi14-548_pass1_cl_src1.arf
[Wed Nov 23 13:16:19 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov 23 13:16:19 2011] Updating source flux to 1.4e-14
[Wed Nov 23 13:17:36 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting