[Wed Nov 23 05:26:59 2011] Detection parameters:
  Position = (1019.6, 770.6) = 12 15 23.18 -65 26 26.7
  Extent = 0.5" x 0.5", rotation angle = 83 degrees
  Source counts = 29.9 +/- 8.3
  Background counts = 39.1
  Rate = 0.0003 +/- 9e-05

[Wed Nov 23 05:26:59 2011] Off-axis axis estimate = 4.30'
[Wed Nov 23 06:28:20 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 06:28:20 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Wed Nov 23 06:28:20 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Wed Nov 23 06:28:20 2011] Giving source the simple spatial ID 24 for pass 0, mean size = 0.92"
[Wed Nov 23 07:21:42 2011] fullrun_ccd1_acisf11101_pi14-548_cl_pass0_src24.ximg exists
[Wed Nov 23 07:21:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11101_pi14-548_cl_pass0_src24.csv
[Wed Nov 23 07:21:42 2011] fullrun_ccd1_acisf11101_pi14-548_cl_pass0_src24_1.ximg exists
[Wed Nov 23 07:21:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11101_pi14-548_cl_pass0_src24.csv
[Wed Nov 23 07:21:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11101_pi14-548_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11101_pi14-548_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 07:21:43 2011] fullrun_ccd1_acisf11101_pi14-548_cl_pass0_tfrozen_src24.ximg exists
[Wed Nov 23 07:21:43 2011] fullrun_ccd1_acisf11101_pi14-548_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Nov 23 07:21:43 2011] Fit fullrun_ccd1_acisf11101_pi14-548_cl_pass0_tfrozen_src24 appears to have run properly
[Wed Nov 23 09:02:37 2011] Source 28 is offset by -3.187348 and 5.120892 pixels which is larger than
2 X fitted extent = 1.232224 x 1.232224, not incorporating fit results
[Wed Nov 23 09:02:37 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 09:02:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 09:02:37 2011] Assessing source extent using major
[Wed Nov 23 09:02:37 2011] Source does appear to be extended
[Wed Nov 23 09:02:37 2011] Computing asymmetry using major and minor axis, asym = 1.11
[Wed Nov 23 09:42:11 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Wed Nov 23 09:42:11 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Wed Nov 23 09:42:11 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.106
[Wed Nov 23 09:42:11 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 0.92"
[Wed Nov 23 10:22:42 2011] fullrun_ccd1_acisf11101_pi14-548_cl_pass1_src22.ximg exists
[Wed Nov 23 10:22:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11101_pi14-548_cl_pass1_src22.csv
[Wed Nov 23 10:22:42 2011] fullrun_ccd1_acisf11101_pi14-548_cl_pass1_src22_1.ximg exists
[Wed Nov 23 10:22:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11101_pi14-548_cl_pass1_src22.csv
[Wed Nov 23 10:22:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11101_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11101_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 23 10:22:43 2011] fullrun_ccd1_acisf11101_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Wed Nov 23 10:22:43 2011] fullrun_ccd1_acisf11101_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Nov 23 10:22:43 2011] Fit fullrun_ccd1_acisf11101_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Wed Nov 23 11:53:27 2011] Source 28 is offset by -3.147612 and 5.148656 pixels which is larger than
2 X fitted extent = 1.327008 x 1.327008, not incorporating fit results
[Wed Nov 23 11:53:27 2011] Vigneting correction estimate = 1.000000
[Wed Nov 23 11:53:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 23 11:53:27 2011] Assessing source extent using major
[Wed Nov 23 11:53:27 2011] Source does appear to be extended
[Wed Nov 23 11:53:27 2011] Computing asymmetry using major and minor axis, asym = 1.11
[Wed Nov 23 12:10:14 2011] Writing source region out to fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28_src.reg
[Wed Nov 23 12:10:14 2011] Extracting stamp from image fullrun_ccd1_acisf11101_pi14-548_cl_sm2.00.img.gz, (995, 746) - (1045, 796)
[Wed Nov 23 12:10:14 2011] Writing fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28.gif
[Wed Nov 23 12:21:40 2011] Size of ../../acisf11101/products/events/fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28_src.evt.gz[events] = 74 counts
[Wed Nov 23 12:21:40 2011] Mean chipx,y = (364.88, 787.86)
[Wed Nov 23 12:21:40 2011] Mean tdetx,y = (4344.14, 4471.88)
[Wed Nov 23 12:21:40 2011] chipx,y range = (346.00-383.00, 766.00-806.00)
[Wed Nov 23 12:21:40 2011] Size of ../../acisf11101/products/events/fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 653 counts
[Wed Nov 23 12:21:41 2011] Not generating rmf since there are only 29 counts
[Wed Nov 23 12:21:41 2011] arf not found, will run specextract
[Wed Nov 23 12:22:06 2011] ../../acisf11101/products/spectra/fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28.warf not found
[Wed Nov 23 12:22:06 2011] ../../acisf11101/products/spectra/fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28.wrmf not found
[Wed Nov 23 12:22:06 2011] Removal of ../../acisf11101/products/spectra/fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28.soff failed
[Wed Nov 23 12:31:49 2011] Spectrum 28 has only 30 counts, deleting rmf
[Wed Nov 23 12:31:49 2011] 195.056
[Wed Nov 23 13:16:17 2011] Updating aperture counts using extracted products
[Wed Nov 23 13:16:17 2011] Error reading totcts from fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28_src.pi.gz
[Wed Nov 23 13:16:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 23 13:16:18 2011] Using photon index=1.80, rate=0.000336, arf fullrun_ccd1_acisf11101_pi14-548_pass1_cl_src28.arf
[Wed Nov 23 13:16:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Nov 23 13:16:18 2011] Updating source flux to 4.5e-15
[Wed Nov 23 13:16:34 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting