[Tue Nov 29 02:28:09 2011] Detection parameters:
  Position = (1177.5, 838.7) = 12 14 20.99 -65 32 36.8
  Extent = 0.5" x 0.5", rotation angle = 34 degrees
  Source counts = 14.9 +/- 4.6
  Background counts = 6.1
  Rate = 0.0002 +/- 5e-05

[Tue Nov 29 02:28:10 2011] Off-axis axis estimate = 5.06'
[Tue Nov 29 05:20:17 2011] Using EEF radius (= 1.20 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 05:20:17 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Tue Nov 29 05:20:17 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.863
[Tue Nov 29 05:20:17 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 1.20"
[Tue Nov 29 06:24:27 2011] fullrun_ccd3_acisf11100_pi14-548_cl_pass0_src56.ximg exists
[Tue Nov 29 06:24:27 2011] fullrun_ccd3_acisf11100_pi14-548_cl_pass0_src56_1.ximg exists
[Tue Nov 29 06:24:27 2011] Fit fullrun_ccd3_acisf11100_pi14-548_cl_pass0_src56 appears to have run properly
[Tue Nov 29 06:24:28 2011] fullrun_ccd3_acisf11100_pi14-548_cl_pass0_tfrozen_src56.ximg exists
[Tue Nov 29 06:24:28 2011] fullrun_ccd3_acisf11100_pi14-548_cl_pass0_tfrozen_src56_1.ximg exists
[Tue Nov 29 06:24:28 2011] Fit fullrun_ccd3_acisf11100_pi14-548_cl_pass0_tfrozen_src56 appears to have run properly
[Tue Nov 29 06:24:58 2011] Spatial fit model total counts = 200.727000, observed total counts = 202.000000
[Tue Nov 29 06:24:58 2011] Offset between fit and detection position for source 53 = 6.173188 pixels
[Tue Nov 29 06:24:58 2011] 187.125900 total counts/ 62.419900 bgd. counts: snr = 15.784318
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 6.173188 pixels
  Position = (1182.9, 841.7) = 12 14 20.60 -65 32 35.6
  Extent = 2.4 (2.4-4.8)", rotation angle = 0
  Source counts = 124.7 +/- 13.7
  Background counts = 62.4
  Rate = 0.001 +/- 0.0001
[Tue Nov 29 06:24:58 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 06:24:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 06:24:58 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 06:24:58 2011] Source does appear to be extended
[Tue Nov 29 06:24:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 08:31:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 08:31:01 2011] Initial guess for spatial extent in simple fitting = 2.41"
[Tue Nov 29 08:31:01 2011] source mask rpix=4.9, npix_max = 116, mask sum = 110, frac = 0.945
[Tue Nov 29 08:31:01 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 2.41"
[Tue Nov 29 09:21:47 2011] fullrun_ccd3_acisf11100_pi14-548_cl_pass1_src49.ximg exists
[Tue Nov 29 09:21:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11100_pi14-548_cl_pass1_src49.csv
[Tue Nov 29 09:21:47 2011] fullrun_ccd3_acisf11100_pi14-548_cl_pass1_src49_1.ximg exists
[Tue Nov 29 09:21:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11100_pi14-548_cl_pass1_src49.csv
[Tue Nov 29 09:21:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11100_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11100_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 09:21:47 2011] fullrun_ccd3_acisf11100_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Tue Nov 29 09:21:47 2011] fullrun_ccd3_acisf11100_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Tue Nov 29 09:21:47 2011] Fit fullrun_ccd3_acisf11100_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Tue Nov 29 09:22:12 2011] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 27.380357 pixels away
[Tue Nov 29 09:22:12 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 09:22:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 09:22:12 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 09:22:12 2011] Source does appear to be extended
[Tue Nov 29 09:22:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 10:16:07 2011] Writing source region out to fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53_src.reg
[Tue Nov 29 10:16:07 2011] Extracting stamp from image fullrun_ccd3_acisf11100_pi14-548_cl_sm2.00.img.gz, (1073, 732) - (1293, 952)
[Tue Nov 29 10:16:07 2011] Writing fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53.gif
[Tue Nov 29 10:42:21 2011] Size of ../../acisf11100/products/events/fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53_src.evt.gz[events] = 597 counts
[Tue Nov 29 10:42:21 2011] Mean chipx,y = (332.85, 951.29)
[Tue Nov 29 10:42:21 2011] Mean tdetx,y = (4180.71, 3393.85)
[Tue Nov 29 10:42:21 2011] chipx,y range = (298.00-366.00, 918.00-988.00)
[Tue Nov 29 10:42:21 2011] Size of ../../acisf11100/products/events/fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53_bgd.evt.gz[events] = 2301 counts
[Tue Nov 29 10:42:23 2011] rmf not found, will run specextract
[Tue Nov 29 10:42:23 2011] arf not found, will run specextract
[Tue Nov 29 10:42:58 2011] ../../acisf11100/products/spectra/fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53.warf not found
[Tue Nov 29 10:42:58 2011] ../../acisf11100/products/spectra/fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53.wrmf not found
[Tue Nov 29 10:42:58 2011] Removal of ../../acisf11100/products/spectra/fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53.soff failed
[Tue Nov 29 10:44:22 2011] Keeping rmf generated by specextract
[Tue Nov 29 10:44:22 2011] 178.806
[Tue Nov 29 10:44:30 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:44:30 2011] Error reading totcts from fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53_src.pi.gz
[Tue Nov 29 10:44:30 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:44:30 2011] Using photon index=1.80, rate=0.00126, arf fullrun_ccd3_acisf11100_pi14-548_pass1_cl_src53.arf
[Tue Nov 29 10:44:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov 29 10:44:30 2011] Updating source flux to 1.8e-14