[Tue Nov 29 02:26:52 2011] Detection parameters:
  Position = (1038.4, 801.4) = 12 15 22.17 -65 26 15.5
  Extent = 0.7" x 0.6", rotation angle = 11 degrees
  Source counts = 29.2 +/- 7.6
  Background counts = 27.8
  Rate = 0.0003 +/- 8e-05

[Tue Nov 29 02:26:53 2011] Off-axis axis estimate = 4.29'
[Tue Nov 29 03:35:04 2011] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 03:35:04 2011] Initial guess for spatial extent in simple fitting = 0.92"
[Tue Nov 29 03:35:04 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.113
[Tue Nov 29 03:35:04 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 0.92"
[Tue Nov 29 04:34:29 2011] fullrun_ccd1_acisf11100_pi14-548_cl_pass0_src29.ximg exists
[Tue Nov 29 04:34:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11100_pi14-548_cl_pass0_src29.csv
[Tue Nov 29 04:34:29 2011] fullrun_ccd1_acisf11100_pi14-548_cl_pass0_src29_1.ximg exists
[Tue Nov 29 04:34:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11100_pi14-548_cl_pass0_src29.csv
[Tue Nov 29 04:34:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11100_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11100_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 04:34:30 2011] fullrun_ccd1_acisf11100_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Tue Nov 29 04:34:30 2011] fullrun_ccd1_acisf11100_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Tue Nov 29 04:34:30 2011] Fit fullrun_ccd1_acisf11100_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Tue Nov 29 06:24:45 2011] Spatial fit model total counts = 302.350000, observed total counts = 303.000000
[Tue Nov 29 06:24:45 2011] Offset between fit and detection position for source 39 = 3.190705 pixels
[Tue Nov 29 06:24:45 2011] 301.110900 total counts/ 237.754000 bgd. counts: snr = 4.108942
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 3.190705 pixels
  Position = (1036.4, 803.9) = 12 15 22.36 -65 26 14.5
  Extent = 1.8 (1.8-3.7)", rotation angle = 0
  Source counts = 63.4 +/- 17.4
  Background counts = 237.8
  Rate = 0.0006 +/- 0.0002
[Tue Nov 29 06:24:45 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 06:24:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 06:24:45 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 06:24:45 2011] Source does appear to be extended
[Tue Nov 29 06:24:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 07:05:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 07:05:29 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Tue Nov 29 07:05:29 2011] source mask rpix=3.7, npix_max = 71, mask sum = 72, frac = 1.001
[Tue Nov 29 07:05:29 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 1.84"
[Tue Nov 29 07:52:12 2011] fullrun_ccd1_acisf11100_pi14-548_cl_pass1_src28.ximg exists
[Tue Nov 29 07:52:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11100_pi14-548_cl_pass1_src28.csv
[Tue Nov 29 07:52:12 2011] fullrun_ccd1_acisf11100_pi14-548_cl_pass1_src28_1.ximg exists
[Tue Nov 29 07:52:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf11100_pi14-548_cl_pass1_src28.csv
[Tue Nov 29 07:52:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11100_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11100_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 07:52:12 2011] fullrun_ccd1_acisf11100_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Tue Nov 29 07:52:12 2011] fullrun_ccd1_acisf11100_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Tue Nov 29 07:52:12 2011] Fit fullrun_ccd1_acisf11100_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Nov 29 09:22:01 2011] Warning, spatial fit 28 centroid is now closest to src. 7
[Tue Nov 29 09:22:01 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 09:22:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 09:22:01 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 09:22:01 2011] Source does appear to be extended
[Tue Nov 29 09:22:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:39:30 2011] Writing source region out to fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39_src.reg
[Tue Nov 29 09:39:30 2011] Extracting stamp from image fullrun_ccd1_acisf11100_pi14-548_cl_sm2.00.img.gz, (952, 720) - (1121, 888)
[Tue Nov 29 09:39:30 2011] Writing fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39.gif
[Tue Nov 29 09:53:56 2011] Size of ../../acisf11100/products/events/fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39_src.evt.gz[events] = 687 counts
[Tue Nov 29 09:53:56 2011] Mean chipx,y = (375.36, 809.61)
[Tue Nov 29 09:53:56 2011] Mean tdetx,y = (4322.39, 4482.36)
[Tue Nov 29 09:53:56 2011] chipx,y range = (347.00-406.00, 779.00-841.00)
[Tue Nov 29 09:53:56 2011] Size of ../../acisf11100/products/events/fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39_bgd.evt.gz[events] = 4589 counts
[Tue Nov 29 09:53:57 2011] Not generating rmf since there are only 63 counts
[Tue Nov 29 09:53:57 2011] arf not found, will run specextract
[Tue Nov 29 09:54:22 2011] ../../acisf11100/products/spectra/fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39.warf not found
[Tue Nov 29 09:54:22 2011] ../../acisf11100/products/spectra/fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39.wrmf not found
[Tue Nov 29 09:54:22 2011] Removal of ../../acisf11100/products/spectra/fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39.soff failed
[Tue Nov 29 09:56:15 2011] Spectrum 39 has only 63 counts, deleting rmf
[Tue Nov 29 09:56:15 2011] 194.929
[Tue Nov 29 10:44:28 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:44:28 2011] Error reading totcts from fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39_src.pi.gz
[Tue Nov 29 10:44:28 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:44:28 2011] Using photon index=1.80, rate=0.000642, arf fullrun_ccd1_acisf11100_pi14-548_pass1_cl_src39.arf
[Tue Nov 29 10:44:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov 29 10:44:28 2011] Updating source flux to 8.6e-15
[Tue Nov 29 10:44:54 2011] Source 39 has fewer than 100.000000 counts, skipping spectral fitting