[Tue Nov 29 02:26:13 2011] Detection parameters:
  Position = (506.8, 241.4) = 12 14 58.93 -65 25 34.9
  Extent = 0.5" x 0.5", rotation angle = 22 degrees
  Source counts = 12.2 +/- 5.9
  Background counts = 22.8
  Rate = 0.0001 +/- 6e-05

[Tue Nov 29 02:26:13 2011] Off-axis axis estimate = 3.00'
[Tue Nov 29 02:37:18 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:37:18 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Tue Nov 29 02:37:18 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.798
[Tue Nov 29 02:37:18 2011] Giving source the simple spatial ID 39 for pass 0, mean size = 0.58"
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src39.ximg exists
[Tue Nov 29 03:35:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src39.csv
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src39_1.ximg exists
[Tue Nov 29 03:35:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src39.csv
[Tue Nov 29 03:35:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src39.ximg exists
[Tue Nov 29 03:35:04 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src39_1.ximg exists
[Tue Nov 29 03:35:04 2011] Fit fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src39 appears to have run properly
[Tue Nov 29 06:24:39 2011] Spatial fit model total counts = 232.885000, observed total counts = 233.000000
[Tue Nov 29 06:24:39 2011] Offset between fit and detection position for source 50 = 1.353392 pixels
[Tue Nov 29 06:24:39 2011] 236.402670 total counts/ 226.624000 bgd. counts: snr = 0.649571
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.353392 pixels
  Position = (508.0, 242.0) = 12 14 58.88 -65 25 34.8
  Extent = 0.3 (0.1-0.6)", rotation angle = 0
  Source counts = 9.8 +/- 15.4
  Background counts = 226.6
  Rate = 0.0001 +/- 0.0002
  Deleting source due to low Poisson probability