[Tue Nov 29 02:26:13 2011] Detection parameters:
  Position = (570.5, 230.0) = 12 14 53.91 -65 25 40.6
  Extent = 0.5" x 0.5", rotation angle = 163 degrees
  Source counts = 37.9 +/- 10.3
  Background counts = 68.1
  Rate = 0.0004 +/- 0.0001

[Tue Nov 29 02:26:13 2011] Off-axis axis estimate = 2.71'
[Tue Nov 29 02:37:18 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:37:18 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Tue Nov 29 02:37:18 2011] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.219
[Tue Nov 29 02:37:18 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.53"
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src18.ximg exists
[Tue Nov 29 03:35:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src18.csv
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src18_1.ximg exists
[Tue Nov 29 03:35:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src18.csv
[Tue Nov 29 03:35:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Nov 29 03:35:03 2011] Fit fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Nov 29 06:24:39 2011] Spatial fit model total counts = 210.000000, observed total counts = 210.000000
[Tue Nov 29 06:24:39 2011] Offset between fit and detection position for source 18 = 1.707224 pixels
[Tue Nov 29 06:24:39 2011] 211.168800 total counts/ 186.407000 bgd. counts: snr = 1.813640
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 1.707224 pixels
  Position = (570.3, 231.7) = 12 14 53.96 -65 25 40.0
  Extent = 0.9 (0.3-1.5)", rotation angle = 0
  Source counts = 24.8 +/- 14.5
  Background counts = 186.4
  Rate = 0.0003 +/- 0.0001
[Tue Nov 29 06:24:39 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 06:24:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 06:24:39 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 06:24:39 2011] Source does appear to be extended
[Tue Nov 29 06:24:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 06:25:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 06:25:24 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Tue Nov 29 06:25:24 2011] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.201
[Tue Nov 29 06:25:24 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.88"
[Tue Nov 29 07:05:28 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src18.ximg exists
[Tue Nov 29 07:05:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src18.csv
[Tue Nov 29 07:05:28 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src18_1.ximg exists
[Tue Nov 29 07:05:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src18.csv
[Tue Nov 29 07:05:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 07:05:29 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Tue Nov 29 07:05:29 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Nov 29 07:05:29 2011] Fit fullrun_ccd0_acisf11100_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Nov 29 09:21:57 2011] Spatial fit model total counts = 217.000000, observed total counts = 217.000000
[Tue Nov 29 09:21:57 2011] Offset between fit and detection position for source 18 = 0.174709 pixels
[Tue Nov 29 09:21:57 2011] 218.178600 total counts/ 195.836000 bgd. counts: snr = 1.596568
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.174709 pixels
  Position = (570.4, 231.5) = 12 14 53.95 -65 25 40.0
  Extent = 0.8 (0.3-1.8)", rotation angle = 0
  Source counts = 22.3 +/- 14.8
  Background counts = 195.8
  Rate = 0.0002 +/- 0.0001
  Deleting source due to low Poisson probability