[Tue Nov 29 02:26:12 2011] Detection parameters:
  Position = (1228.4, 513.1) = 12 14 2.08 -65 23 20.8
  Extent = 2.4" x 1.5", rotation angle = 94 degrees
  Source counts = 144.8 +/- 13.0
  Background counts = 23.2
  Rate = 0.001 +/- 0.0001

[Tue Nov 29 02:26:13 2011] Off-axis axis estimate = 6.66'
[Tue Nov 29 02:37:18 2011] Using EEF radius (= 1.98 ")to estimate initial spatial extent for simple fitting
[Tue Nov 29 02:37:18 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 02:37:18 2011] Initial guess for spatial extent in simple fitting = 1.98"
[Tue Nov 29 02:37:18 2011] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.985
[Tue Nov 29 02:37:18 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.98"
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src1.ximg exists
[Tue Nov 29 03:35:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src1.csv
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Nov 29 03:35:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src1.csv
[Tue Nov 29 03:35:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11100_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Nov 29 03:35:03 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Nov 29 03:35:03 2011] Fit fullrun_ccd0_acisf11100_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Nov 29 06:24:39 2011] Spatial fit model total counts = 170.322000, observed total counts = 171.000000
[Tue Nov 29 06:24:39 2011] Offset between fit and detection position for source 1 = 0.505286 pixels
[Tue Nov 29 06:24:39 2011] 170.460200 total counts/ 25.777200 bgd. counts: snr = 28.497032
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.505286 pixels
  Position = (1228.9, 513.1) = 12 14 2.08 -65 23 21.1
  Extent = 2.3 (2.0-2.7)", rotation angle = 0
  Source counts = 144.7 +/- 13.1
  Background counts = 25.8
  Rate = 0.001 +/- 0.0001
[Tue Nov 29 06:24:39 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 06:24:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 06:24:39 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 06:24:39 2011] Source does appear to be extended
[Tue Nov 29 06:24:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 06:25:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov 29 06:25:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Nov 29 06:25:24 2011] Initial guess for spatial extent in simple fitting = 2.30"
[Tue Nov 29 06:25:24 2011] source mask rpix=4.7, npix_max = 107, mask sum = 100, frac = 0.933
[Tue Nov 29 06:25:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.30"
[Tue Nov 29 07:05:28 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src1.ximg exists
[Tue Nov 29 07:05:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src1.csv
[Tue Nov 29 07:05:28 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Nov 29 07:05:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src1.csv
[Tue Nov 29 07:05:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11100_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov 29 07:05:29 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov 29 07:05:29 2011] fullrun_ccd0_acisf11100_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov 29 07:05:29 2011] Fit fullrun_ccd0_acisf11100_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov 29 09:21:57 2011] Spatial fit model total counts = 173.998000, observed total counts = 174.000000
[Tue Nov 29 09:21:57 2011] Offset between fit and detection position for source 1 = 0.150390 pixels
[Tue Nov 29 09:21:57 2011] 174.145300 total counts/ 21.452300 bgd. counts: snr = 32.967210
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.150390 pixels
  Position = (1229.0, 513.0) = 12 14 2.07 -65 23 21.2
  Extent = 2.4 (2.1-2.8)", rotation angle = 0
  Source counts = 152.7 +/- 13.2
  Background counts = 21.5
  Rate = 0.002 +/- 0.0001
[Tue Nov 29 09:21:57 2011] Vigneting correction estimate = 1.000000
[Tue Nov 29 09:21:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov 29 09:21:57 2011] Assessing source extent using major axis lower bound
[Tue Nov 29 09:21:57 2011] Source does appear to be extended
[Tue Nov 29 09:21:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov 29 09:22:39 2011] Writing source region out to fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1_src.reg
[Tue Nov 29 09:22:39 2011] Extracting stamp from image fullrun_ccd0_acisf11100_pi14-548_cl_sm2.00.img.gz, (1121, 405) - (1337, 621)
[Tue Nov 29 09:22:39 2011] Writing fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1.gif
[Tue Nov 29 09:22:41 2011] Size of ../../acisf11100/products/events/fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1_src.evt.gz[events] = 172 counts
[Tue Nov 29 09:22:41 2011] Mean chipx,y = (990.61, 238.48)
[Tue Nov 29 09:22:41 2011] Mean tdetx,y = (3299.48, 4141.39)
[Tue Nov 29 09:22:41 2011] chipx,y range = (967.00-1023.00, 211.00-264.00)
[Tue Nov 29 09:22:41 2011] Size of ../../acisf11100/products/events/fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 250 counts
[Tue Nov 29 09:22:42 2011] rmf not found, will run specextract
[Tue Nov 29 09:22:42 2011] arf not found, will run specextract
[Tue Nov 29 09:23:00 2011] ../../acisf11100/products/spectra/fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1.warf not found
[Tue Nov 29 09:23:00 2011] ../../acisf11100/products/spectra/fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1.wrmf not found
[Tue Nov 29 09:23:00 2011] Removal of ../../acisf11100/products/spectra/fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1.soff failed
[Tue Nov 29 09:39:29 2011] Keeping rmf generated by specextract
[Tue Nov 29 09:39:29 2011] 144.84
[Tue Nov 29 10:44:27 2011] Updating aperture counts using extracted products
[Tue Nov 29 10:44:27 2011] Error reading totcts from fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Nov 29 10:44:27 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:44:27 2011] Using photon index=1.80, rate=0.00155, arf fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1.arf
[Tue Nov 29 10:44:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov 29 10:44:27 2011] Updating source flux to 2.8e-14
[Tue Nov 29 10:44:54 2011] Reading fit data from acisf11100/analysis//spectral/fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1_pl.csv
[Tue Nov 29 10:44:54 2011] Spectral fit parameter nH value = 1.19128e+22
[Tue Nov 29 10:44:54 2011] Spectral fit parameter PhoIndex value = 2.60542
[Tue Nov 29 10:44:54 2011] Failed to get F(0.3-8.0) from acisf11100/analysis//spectral/fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Nov 29 10:44:54 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov 29 10:44:54 2011] Using Nh = 1.2e+22, photon index=2.61, rate=0.00155, arf fullrun_ccd0_acisf11100_pi14-548_pass1_cl_src1.arf
[Tue Nov 29 10:44:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov 29 10:44:54 2011] Updating source flux to 2.4e-14