[Mon Feb 13 12:27:49 2012] Detection parameters:
  Position = (701.6, 213.8) = 12 14 54.96 -65 37 49.9
  Extent = 2.0" x 1.8", rotation angle = 144 degrees
  Source counts = 20.4 +/- 6.2
  Background counts = 18.6
  Rate = 0.0002 +/- 5e-05

[Mon Feb 13 12:27:50 2012] Off-axis axis estimate = 9.67'
[Mon Feb 13 15:32:26 2012] Using EEF radius (= 4.14 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 15:32:26 2012] Initial guess for spatial extent in simple fitting = 4.14"
[Mon Feb 13 15:32:26 2012] source mask rpix=8.4, npix_max = 317, mask sum = 306, frac = 0.964
[Mon Feb 13 15:32:26 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 4.14"
[Mon Feb 13 17:01:37 2012] fullrun_ccd3_acisf11099_pi14-548_cl_pass0_src67.ximg exists
[Mon Feb 13 17:01:37 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11099_pi14-548_cl_pass0_src67.csv
[Mon Feb 13 17:01:37 2012] fullrun_ccd3_acisf11099_pi14-548_cl_pass0_src67_1.ximg exists
[Mon Feb 13 17:01:37 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11099_pi14-548_cl_pass0_src67.csv
[Mon Feb 13 17:01:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11099_pi14-548_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11099_pi14-548_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 17:01:38 2012] fullrun_ccd3_acisf11099_pi14-548_cl_pass0_tfrozen_src67.ximg exists
[Mon Feb 13 17:01:38 2012] fullrun_ccd3_acisf11099_pi14-548_cl_pass0_tfrozen_src67_1.ximg exists
[Mon Feb 13 17:01:38 2012] Fit fullrun_ccd3_acisf11099_pi14-548_cl_pass0_tfrozen_src67 appears to have run properly
[Mon Feb 13 17:02:16 2012] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 35.481630 pixels away
[Mon Feb 13 17:02:16 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 17:02:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 17:02:16 2012] Assessing source extent using major
[Mon Feb 13 17:02:16 2012] Source does appear to be extended
[Mon Feb 13 17:02:16 2012] Computing asymmetry using major and minor axis, asym = 1.07
[Mon Feb 13 18:57:04 2012] Using EEF radius (= 4.14 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 18:57:04 2012] Initial guess for spatial extent in simple fitting = 4.14"
[Mon Feb 13 18:57:04 2012] source mask rpix=8.4, npix_max = 317, mask sum = 306, frac = 0.964
[Mon Feb 13 18:57:04 2012] Giving source the simple spatial ID 63 for pass 1, mean size = 4.14"
[Mon Feb 13 20:18:57 2012] fullrun_ccd3_acisf11099_pi14-548_cl_pass1_src63.ximg exists
[Mon Feb 13 20:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11099_pi14-548_cl_pass1_src63.csv
[Mon Feb 13 20:18:57 2012] fullrun_ccd3_acisf11099_pi14-548_cl_pass1_src63_1.ximg exists
[Mon Feb 13 20:18:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11099_pi14-548_cl_pass1_src63.csv
[Mon Feb 13 20:18:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11099_pi14-548_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11099_pi14-548_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 20:18:58 2012] fullrun_ccd3_acisf11099_pi14-548_cl_pass1_tfrozen_src63.ximg exists
[Mon Feb 13 20:18:58 2012] fullrun_ccd3_acisf11099_pi14-548_cl_pass1_tfrozen_src63_1.ximg exists
[Mon Feb 13 20:18:58 2012] Fit fullrun_ccd3_acisf11099_pi14-548_cl_pass1_tfrozen_src63 appears to have run properly
[Mon Feb 13 20:19:27 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 31.066845 pixels away
[Mon Feb 13 20:19:27 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 121.842038 pixels away
[Mon Feb 13 20:19:27 2012] Spatial fit model total counts = 103.000000, observed total counts = 103.000000
[Mon Feb 13 20:19:27 2012] Offset between fit and detection position for source 45 = 0.761315 pixels
[Mon Feb 13 20:19:27 2012] 103.420600 total counts/ 79.878400 bgd. counts: snr = 2.634101
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.761315 pixels
  Position = (701.8, 213.0) = 12 14 54.99 -65 37 50.5
  Extent = 1.9 (1.4-2.6)", rotation angle = 0
  Source counts = 23.5 +/- 10.2
  Background counts = 79.9
  Rate = 0.0002 +/- 8e-05
[Mon Feb 13 20:19:27 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 20:19:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 20:19:27 2012] Assessing source extent using major axis lower bound
[Mon Feb 13 20:19:27 2012] Source does appear to be extended
[Mon Feb 13 20:19:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 13 21:28:30 2012] Writing source region out to fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45_src.reg
[Mon Feb 13 21:28:30 2012] Extracting stamp from image fullrun_ccd3_acisf11099_pi14-548_cl_sm2.00.img.gz, (613, 124) - (791, 302)
[Mon Feb 13 21:28:30 2012] Writing fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45.gif
[Mon Feb 13 22:03:33 2012] Size of ../../acisf11099/products/events/fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45_src.evt.gz[events] = 43 counts
[Mon Feb 13 22:03:33 2012] Mean chipx,y = (146.28, 154.28)
[Mon Feb 13 22:03:33 2012] Mean tdetx,y = (4977.72, 3207.28)
[Mon Feb 13 22:03:33 2012] chipx,y range = (117.00-174.00, 135.00-178.00)
[Mon Feb 13 22:03:33 2012] Size of ../../acisf11099/products/events/fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45_bgd.evt.gz[events] = 271 counts
[Mon Feb 13 22:03:34 2012] Not generating rmf since there are only 23 counts
[Mon Feb 13 22:03:34 2012] arf not found, will run specextract
[Mon Feb 13 22:03:50 2012] ../../acisf11099/products/spectra/fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45.warf not found
[Mon Feb 13 22:03:50 2012] ../../acisf11099/products/spectra/fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45.wrmf not found
[Mon Feb 13 22:03:50 2012] Removal of ../../acisf11099/products/spectra/fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45.soff failed
[Mon Feb 13 22:08:26 2012] Spectrum 45 has only 24 counts, deleting rmf
[Mon Feb 13 22:08:26 2012] 157.914
[Mon Feb 13 22:08:36 2012] Updating aperture counts using extracted products
[Mon Feb 13 22:08:36 2012] Error reading totcts from fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45_src.pi.gz
[Mon Feb 13 22:08:38 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 13 22:08:38 2012] Using photon index=1.80, rate=0.000181, arf fullrun_ccd3_acisf11099_pi14-548_pass1_cl_src45.arf
[Mon Feb 13 22:08:38 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Feb 13 22:08:38 2012] Updating source flux to 2.9e-15
[Mon Feb 13 22:10:25 2012] Source 45 has fewer than 100.000000 counts, skipping spectral fitting