[Fri Dec 16 15:50:26 2011] Detection parameters:
  Position = (979.3, 811.4) = 12 14 32.29 -65 32 54.4
  Extent = 0.6" x 0.5", rotation angle = 111 degrees
  Source counts = 67.9 +/- 11.4
  Background counts = 62.1
  Rate = 0.0007 +/- 0.0001

[Fri Dec 16 15:50:28 2011] Off-axis axis estimate = 4.90'
[Fri Dec 16 18:29:39 2011] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 18:29:39 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Fri Dec 16 18:29:39 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.789
[Fri Dec 16 18:29:39 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.14"
[Fri Dec 16 19:48:11 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src7.ximg exists
[Fri Dec 16 19:48:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src7.csv
[Fri Dec 16 19:48:11 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Dec 16 19:48:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src7.csv
[Fri Dec 16 19:48:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec 16 19:48:12 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec 16 19:48:43 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 12.404904 pixels away
[Fri Dec 16 19:48:43 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:43 2011] Assessing source extent using major
[Fri Dec 16 19:48:43 2011] Source does appear to be extended
[Fri Dec 16 19:48:43 2011] Computing asymmetry using major and minor axis, asym = 1.18
[Fri Dec 16 21:58:46 2011] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:58:46 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Fri Dec 16 21:58:46 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.789
[Fri Dec 16 21:58:46 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.14"
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src7.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src7.csv
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src7.csv
[Fri Dec 16 23:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Dec 16 23:06:28 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Dec 16 23:06:54 2011] Spatial fit model total counts = 253.651000, observed total counts = 254.000000
[Fri Dec 16 23:06:54 2011] Offset between fit and detection position for source 6 = 1.048587 pixels
[Fri Dec 16 23:06:54 2011] 245.464200 total counts/ 216.257000 bgd. counts: snr = 1.986117
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.048587 pixels
  Position = (980.3, 810.9) = 12 14 32.26 -65 32 54.9
  Extent = 1.4 (0.3-2.3)", rotation angle = 0
  Source counts = 29.2 +/- 15.7
  Background counts = 216.3
  Rate = 0.0003 +/- 0.0002
[Fri Dec 16 23:06:54 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:54 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:54 2011] Source does appear to be extended
[Fri Dec 16 23:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 00:05:57 2011] Writing source region out to fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6_src.reg
[Sat Dec 17 00:05:57 2011] Extracting stamp from image fullrun_ccd3_acisf11098_pi14-548_cl_sm2.00.img.gz, (918, 749) - (1043, 873)
[Sat Dec 17 00:05:57 2011] Writing fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6.gif
[Sat Dec 17 00:09:55 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6_src.evt.gz[events] = 357 counts
[Sat Dec 17 00:09:55 2011] Mean chipx,y = (404.07, 770.95)
[Sat Dec 17 00:09:55 2011] Mean tdetx,y = (4361.05, 3465.07)
[Sat Dec 17 00:09:55 2011] chipx,y range = (377.00-428.00, 745.00-798.00)
[Sat Dec 17 00:09:55 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 806 counts
[Sat Dec 17 00:09:56 2011] Not generating rmf since there are only 29 counts
[Sat Dec 17 00:09:56 2011] arf not found, will run specextract
[Sat Dec 17 00:10:29 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6.warf not found
[Sat Dec 17 00:10:29 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6.wrmf not found
[Sat Dec 17 00:10:29 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6.soff failed
[Sat Dec 17 00:39:22 2011] Spectrum 6 has only 29 counts, deleting rmf
[Sat Dec 17 00:39:22 2011] 181.949
[Sat Dec 17 00:39:30 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:30 2011] Error reading totcts from fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6_src.pi.gz
[Sat Dec 17 00:39:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:31 2011] Using photon index=1.80, rate=0.000305, arf fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src6.arf
[Sat Dec 17 00:39:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:31 2011] Updating source flux to 4.3e-15
[Sat Dec 17 00:40:36 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting