[Fri Dec 16 15:50:27 2011] Detection parameters:
  Position = (707.6, 820.8) = 12 14 53.83 -65 32 49.8
  Extent = 0.5" x 0.5", rotation angle = 61 degrees
  Source counts = 38.9 +/- 8.9
  Background counts = 41.1
  Rate = 0.0004 +/- 9e-05

[Fri Dec 16 15:50:28 2011] Off-axis axis estimate = 4.69'
[Fri Dec 16 18:29:39 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 18:29:39 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Fri Dec 16 18:29:39 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.884
[Fri Dec 16 18:29:39 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 1.06"
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src29.ximg exists
[Fri Dec 16 19:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src29.csv
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src29_1.ximg exists
[Fri Dec 16 19:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src29.csv
[Fri Dec 16 19:48:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src29.ximg exists
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Dec 16 19:48:12 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Dec 16 19:48:43 2011] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 55 at 11.098283 pixels away
[Fri Dec 16 19:48:43 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:43 2011] Assessing source extent using major
[Fri Dec 16 19:48:43 2011] Source does appear to be extended
[Fri Dec 16 19:48:43 2011] Computing asymmetry using major and minor axis, asym = 1.09
[Fri Dec 16 21:58:46 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:58:46 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Fri Dec 16 21:58:46 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.884
[Fri Dec 16 21:58:46 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 1.06"
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src29.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src29.csv
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src29_1.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src29.csv
[Fri Dec 16 23:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src29.ximg exists
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src29_1.ximg exists
[Fri Dec 16 23:06:28 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Dec 16 23:06:54 2011] Spatial fit model total counts = 262.338000, observed total counts = 263.000000
[Fri Dec 16 23:06:54 2011] Offset between fit and detection position for source 55 = 4.524438 pixels
[Fri Dec 16 23:06:54 2011] 270.302200 total counts/ 185.355000 bgd. counts: snr = 6.239459
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 4.524438 pixels
  Position = (703.1, 821.3) = 12 14 54.22 -65 32 49.8
  Extent = 2.1 (2.1-4.2)", rotation angle = 0
  Source counts = 84.9 +/- 16.4
  Background counts = 185.4
  Rate = 0.0009 +/- 0.0002
[Fri Dec 16 23:06:54 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:54 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:54 2011] Source does appear to be extended
[Fri Dec 16 23:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 00:05:57 2011] Writing source region out to fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55_src.reg
[Sat Dec 17 00:05:57 2011] Extracting stamp from image fullrun_ccd3_acisf11098_pi14-548_cl_sm2.00.img.gz, (606, 724) - (800, 918)
[Sat Dec 17 00:05:57 2011] Writing fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55.gif
[Sat Dec 17 00:22:57 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55_src.evt.gz[events] = 811 counts
[Sat Dec 17 00:22:57 2011] Mean chipx,y = (599.47, 572.45)
[Sat Dec 17 00:22:57 2011] Mean tdetx,y = (4559.55, 3660.47)
[Sat Dec 17 00:22:57 2011] chipx,y range = (566.00-631.00, 539.00-605.00)
[Sat Dec 17 00:22:57 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55_bgd.evt.gz[events] = 5952 counts
[Sat Dec 17 00:22:58 2011] Not generating rmf since there are only 84 counts
[Sat Dec 17 00:22:58 2011] arf not found, will run specextract
[Sat Dec 17 00:23:28 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55.warf not found
[Sat Dec 17 00:23:28 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55.wrmf not found
[Sat Dec 17 00:23:28 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55.soff failed
[Sat Dec 17 00:39:22 2011] Spectrum 55 has only 85 counts, deleting rmf
[Sat Dec 17 00:39:22 2011] 187.25
[Sat Dec 17 00:39:30 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:30 2011] Error reading totcts from fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55_src.pi.gz
[Sat Dec 17 00:39:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:31 2011] Using photon index=1.80, rate=0.000886, arf fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src55.arf
[Sat Dec 17 00:39:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:31 2011] Updating source flux to 1.2e-14
[Sat Dec 17 00:40:36 2011] Source 55 has fewer than 100.000000 counts, skipping spectral fitting