[Fri Dec 16 15:50:27 2011] Detection parameters:
  Position = (611.4, 299.1) = 12 15 1.49 -65 37 6.4
  Extent = 2.3" x 1.7", rotation angle = 14 degrees
  Source counts = 39.1 +/- 7.6
  Background counts = 18.9
  Rate = 0.0004 +/- 8e-05

[Fri Dec 16 15:50:28 2011] Off-axis axis estimate = 9.04'
[Fri Dec 16 18:29:39 2011] Using EEF radius (= 3.62 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 18:29:39 2011] Initial guess for spatial extent in simple fitting = 3.62"
[Fri Dec 16 18:29:39 2011] source mask rpix=7.3, npix_max = 246, mask sum = 238, frac = 0.966
[Fri Dec 16 18:29:39 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 3.62"
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src28.ximg exists
[Fri Dec 16 19:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src28.csv
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src28_1.ximg exists
[Fri Dec 16 19:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src28.csv
[Fri Dec 16 19:48:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Dec 16 19:48:12 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Fri Dec 16 19:48:43 2011] Spatial fit model total counts = 86.999800, observed total counts = 87.000000
[Fri Dec 16 19:48:43 2011] Offset between fit and detection position for source 36 = 0.972096 pixels
[Fri Dec 16 19:48:43 2011] 86.771300 total counts/ 41.786300 bgd. counts: snr = 6.959063
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.972096 pixels
  Position = (612.3, 299.0) = 12 15 1.46 -65 37 6.7
  Extent = 2.2 (1.8-2.8)", rotation angle = 0
  Source counts = 45.0 +/- 9.3
  Background counts = 41.8
  Rate = 0.0005 +/- 0.0001
[Fri Dec 16 19:48:43 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:43 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:48:43 2011] Source does appear to be extended
[Fri Dec 16 19:48:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 21:58:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:58:46 2011] Initial guess for spatial extent in simple fitting = 2.22"
[Fri Dec 16 21:58:46 2011] source mask rpix=4.5, npix_max = 100, mask sum = 100, frac = 0.995
[Fri Dec 16 21:58:46 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 2.22"
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src28.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src28.csv
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src28_1.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src28.csv
[Fri Dec 16 23:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Dec 16 23:06:28 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Fri Dec 16 23:06:54 2011] Spatial fit model total counts = 53.273400, observed total counts = 55.000000
[Fri Dec 16 23:06:54 2011] Offset between fit and detection position for source 36 = 1.198953 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 1.198953 pixels
  Position = (611.2, 298.7) = 12 15 1.55 -65 37 6.9
  Extent = 2.3 (2.0-2.6)", rotation angle = 0
  Source counts = 54.6 +/- 7.4
  Background counts = 0.0
  Rate = 0.0006 +/- 8e-05
[Fri Dec 16 23:06:54 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:54 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:54 2011] Source does appear to be extended
[Fri Dec 16 23:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 00:05:57 2011] Writing source region out to fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36_src.reg
[Sat Dec 17 00:05:57 2011] Extracting stamp from image fullrun_ccd3_acisf11098_pi14-548_cl_sm2.00.img.gz, (505, 193) - (717, 404)
[Sat Dec 17 00:05:57 2011] Writing fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36.gif
[Sat Dec 17 00:22:29 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36_src.evt.gz[events] = 67 counts
[Sat Dec 17 00:22:29 2011] Mean chipx,y = (268.37, 154.61)
[Sat Dec 17 00:22:29 2011] Mean tdetx,y = (4977.39, 3329.37)
[Sat Dec 17 00:22:29 2011] chipx,y range = (240.00-294.00, 130.00-182.00)
[Sat Dec 17 00:22:29 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 340 counts
[Sat Dec 17 00:22:31 2011] Not generating rmf since there are only 54 counts
[Sat Dec 17 00:22:31 2011] arf not found, will run specextract
[Sat Dec 17 00:22:47 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36.warf not found
[Sat Dec 17 00:22:47 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36.wrmf not found
[Sat Dec 17 00:22:47 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36.soff failed
[Sat Dec 17 00:39:22 2011] Spectrum 36 has only 55 counts, deleting rmf
[Sat Dec 17 00:39:22 2011] 155.345
[Sat Dec 17 00:39:30 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:30 2011] Error reading totcts from fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36_src.pi.gz
[Sat Dec 17 00:39:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:31 2011] Using photon index=1.80, rate=0.000569, arf fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src36.arf
[Sat Dec 17 00:39:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:31 2011] Updating source flux to 9.3e-15
[Sat Dec 17 00:40:36 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting