[Fri Dec 16 15:50:27 2011] Detection parameters:
  Position = (962.4, 1127.0) = 12 14 33.66 -65 30 19.1
  Extent = 0.5" x 0.5", rotation angle = 15 degrees
  Source counts = 18.8 +/- 4.9
  Background counts = 5.2
  Rate = 0.0002 +/- 5e-05

[Fri Dec 16 15:50:28 2011] Off-axis axis estimate = 2.45'
[Fri Dec 16 18:29:39 2011] Using EEF radius (= 0.49 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 18:29:39 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Fri Dec 16 18:29:39 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.019
[Fri Dec 16 18:29:39 2011] Giving source the simple spatial ID 57 for pass 0, mean size = 0.49"
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src57.ximg exists
[Fri Dec 16 19:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src57.csv
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src57_1.ximg exists
[Fri Dec 16 19:48:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src57.csv
[Fri Dec 16 19:48:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src57.ximg exists
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src57_1.ximg exists
[Fri Dec 16 19:48:12 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src57 appears to have run properly
[Fri Dec 16 19:48:43 2011] Spatial fit model total counts = 39.745500, observed total counts = 40.000000
[Fri Dec 16 19:48:43 2011] Offset between fit and detection position for source 31 = 0.796959 pixels
[Fri Dec 16 19:48:43 2011] 38.364900 total counts/ 18.185300 bgd. counts: snr = 4.732083
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.796959 pixels
  Position = (963.0, 1127.6) = 12 14 33.65 -65 30 19.1
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 20.2 +/- 6.2
  Background counts = 18.2
  Rate = 0.0002 +/- 6e-05
[Fri Dec 16 19:48:43 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:43 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:48:43 2011] Source does appear to be extended
[Fri Dec 16 19:48:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 21:58:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:58:46 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Fri Dec 16 21:58:46 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.799
[Fri Dec 16 21:58:46 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 0.43"
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src53.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src53.csv
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src53_1.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src53.csv
[Fri Dec 16 23:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src53.ximg exists
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Dec 16 23:06:28 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src53 appears to have run properly
[Fri Dec 16 23:06:54 2011] Spatial fit model total counts = 43.908900, observed total counts = 44.000000
[Fri Dec 16 23:06:54 2011] Offset between fit and detection position for source 31 = 0.088371 pixels
[Fri Dec 16 23:06:54 2011] 43.353500 total counts/ 24.401500 bgd. counts: snr = 3.836602
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 0.088371 pixels
  Position = (962.9, 1127.6) = 12 14 33.66 -65 30 19.1
  Extent = 0.4 (0.2-0.5)", rotation angle = 0
  Source counts = 19.0 +/- 6.6
  Background counts = 24.4
  Rate = 0.0002 +/- 7e-05
[Fri Dec 16 23:06:54 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:54 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:54 2011] Source does appear to be extended
[Fri Dec 16 23:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 00:05:58 2011] Writing source region out to fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31_src.reg
[Sat Dec 17 00:05:58 2011] Extracting stamp from image fullrun_ccd3_acisf11098_pi14-548_cl_sm2.00.img.gz, (945, 1110) - (981, 1145)
[Sat Dec 17 00:05:58 2011] Writing fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31.gif
[Sat Dec 17 00:36:42 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31_src.evt.gz[events] = 22 counts
[Sat Dec 17 00:36:42 2011] Mean chipx,y = (656.55, 970.09)
[Sat Dec 17 00:36:42 2011] Mean tdetx,y = (4161.91, 3717.55)
[Sat Dec 17 00:36:42 2011] chipx,y range = (634.00-669.00, 955.00-986.00)
[Sat Dec 17 00:36:42 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 38 counts
[Sat Dec 17 00:36:43 2011] Not generating rmf since there are only 18 counts
[Sat Dec 17 00:36:43 2011] arf not found, will run specextract
[Sat Dec 17 00:37:13 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31.warf not found
[Sat Dec 17 00:37:13 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31.wrmf not found
[Sat Dec 17 00:37:13 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31.soff failed
[Sat Dec 17 00:39:23 2011] Spectrum 31 has only 19 counts, deleting rmf
[Sat Dec 17 00:39:23 2011] 179.908
[Sat Dec 17 00:39:31 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:31 2011] Error reading totcts from fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31_src.pi.gz
[Sat Dec 17 00:39:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:31 2011] Using photon index=1.80, rate=0.000198, arf fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src31.arf
[Sat Dec 17 00:39:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:31 2011] Updating source flux to 2.9e-15
[Sat Dec 17 00:40:36 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting