[Fri Dec 16 15:50:27 2011] Detection parameters:
  Position = (824.6, 1021.6) = 12 14 44.56 -65 31 11.0
  Extent = 1.0" x 0.7", rotation angle = 120 degrees
  Source counts = 31.3 +/- 6.5
  Background counts = 10.7
  Rate = 0.0003 +/- 7e-05

[Fri Dec 16 15:50:28 2011] Off-axis axis estimate = 2.97'
[Fri Dec 16 18:29:39 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 18:29:39 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Fri Dec 16 18:29:39 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.808
[Fri Dec 16 18:29:39 2011] Giving source the simple spatial ID 40 for pass 0, mean size = 0.57"
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src40.ximg exists
[Fri Dec 16 19:48:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src40.csv
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src40_1.ximg exists
[Fri Dec 16 19:48:12 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src40.csv
[Fri Dec 16 19:48:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src40.ximg exists
[Fri Dec 16 19:48:12 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src40_1.ximg exists
[Fri Dec 16 19:48:12 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass0_tfrozen_src40 appears to have run properly
[Fri Dec 16 19:48:43 2011] Spatial fit model total counts = 51.999900, observed total counts = 52.000000
[Fri Dec 16 19:48:43 2011] Offset between fit and detection position for source 25 = 1.126353 pixels
[Fri Dec 16 19:48:43 2011] 53.816000 total counts/ 30.673700 bgd. counts: snr = 4.178529
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.126353 pixels
  Position = (825.6, 1022.1) = 12 14 44.52 -65 31 11.0
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 23.1 +/- 7.3
  Background counts = 30.7
  Rate = 0.0002 +/- 8e-05
[Fri Dec 16 19:48:43 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:43 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:48:43 2011] Source does appear to be extended
[Fri Dec 16 19:48:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 21:58:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:58:46 2011] Initial guess for spatial extent in simple fitting = 0.50"
[Fri Dec 16 21:58:46 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.982
[Fri Dec 16 21:58:46 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 0.50"
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src39.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src39.csv
[Fri Dec 16 23:06:27 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src39_1.ximg exists
[Fri Dec 16 23:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src39.csv
[Fri Dec 16 23:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11098_pi14-548_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src39.ximg exists
[Fri Dec 16 23:06:28 2011] fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Dec 16 23:06:28 2011] Fit fullrun_ccd3_acisf11098_pi14-548_cl_pass1_tfrozen_src39 appears to have run properly
[Fri Dec 16 23:06:54 2011] Spatial fit model total counts = 51.999800, observed total counts = 52.000000
[Fri Dec 16 23:06:54 2011] Offset between fit and detection position for source 25 = 0.000004 pixels
[Fri Dec 16 23:06:54 2011] 53.815800 total counts/ 30.673400 bgd. counts: snr = 4.178568
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.000004 pixels
  Position = (825.6, 1022.1) = 12 14 44.52 -65 31 11.0
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 23.1 +/- 7.3
  Background counts = 30.7
  Rate = 0.0002 +/- 8e-05
[Fri Dec 16 23:06:54 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:54 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:54 2011] Source does appear to be extended
[Fri Dec 16 23:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 00:05:58 2011] Writing source region out to fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25_src.reg
[Sat Dec 17 00:05:58 2011] Extracting stamp from image fullrun_ccd3_acisf11098_pi14-548_cl_sm2.00.img.gz, (803, 999) - (848, 1045)
[Sat Dec 17 00:05:58 2011] Writing fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25.gif
[Sat Dec 17 00:29:06 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25_src.evt.gz[events] = 30 counts
[Sat Dec 17 00:29:06 2011] Mean chipx,y = (667.13, 797.83)
[Sat Dec 17 00:29:06 2011] Mean tdetx,y = (4334.17, 3728.13)
[Sat Dec 17 00:29:06 2011] chipx,y range = (649.00-681.00, 780.00-814.00)
[Sat Dec 17 00:29:06 2011] Size of ../../acisf11098/products/events/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25_bgd.evt.gz[events] = 57 counts
[Sat Dec 17 00:29:07 2011] Not generating rmf since there are only 23 counts
[Sat Dec 17 00:29:07 2011] arf not found, will run specextract
[Sat Dec 17 00:29:40 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25.warf not found
[Sat Dec 17 00:29:40 2011] ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25.wrmf not found
[Sat Dec 17 00:29:40 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25.soff failed
[Sat Dec 17 00:39:22 2011] Spectrum 25 has only 23 counts, deleting rmf
[Sat Dec 17 00:39:23 2011] 193.325
[Sat Dec 17 00:39:31 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:31 2011] Error reading totcts from fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25_src.pi.gz
[Sat Dec 17 00:39:31 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:31 2011] Using photon index=1.80, rate=0.000241, arf fullrun_ccd3_acisf11098_pi14-548_pass1_cl_src25.arf
[Sat Dec 17 00:39:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:31 2011] Updating source flux to 3.2e-15
[Sat Dec 17 00:40:36 2011] Source 25 has fewer than 100.000000 counts, skipping spectral fitting