[Fri Dec 16 15:49:47 2011] Detection parameters:
  Position = (459.6, 986.3) = 12 14 13.17 -65 25 45.2
  Extent = 0.5" x 0.5", rotation angle = 117 degrees
  Source counts = 23.1 +/- 5.4
  Background counts = 5.9
  Rate = 0.0002 +/- 6e-05

[Fri Dec 16 15:49:48 2011] Off-axis axis estimate = 4.18'
[Fri Dec 16 17:47:46 2011] Using EEF radius (= 0.89 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 17:47:46 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Fri Dec 16 17:47:46 2011] source mask rpix=1.8, npix_max = 21, mask sum = 22, frac = 1.040
[Fri Dec 16 17:47:46 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 0.89"
[Fri Dec 16 18:29:38 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src19.ximg exists
[Fri Dec 16 18:29:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src19.csv
[Fri Dec 16 18:29:38 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Dec 16 18:29:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src19.csv
[Fri Dec 16 18:29:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 18:29:38 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Dec 16 18:29:38 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Dec 16 18:29:38 2011] Fit fullrun_ccd2_acisf11098_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Dec 16 19:48:34 2011] Spatial fit model total counts = 43.987800, observed total counts = 44.000000
[Fri Dec 16 19:48:34 2011] Offset between fit and detection position for source 9 = 1.377525 pixels
[Fri Dec 16 19:48:34 2011] 43.798300 total counts/ 16.120600 bgd. counts: snr = 6.893494
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.377525 pixels
  Position = (459.8, 987.7) = 12 14 13.19 -65 25 44.8
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 27.7 +/- 6.6
  Background counts = 16.1
  Rate = 0.0003 +/- 7e-05
[Fri Dec 16 19:48:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:34 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:48:34 2011] Source does appear to be extended
[Fri Dec 16 19:48:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 21:19:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:19:54 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Fri Dec 16 21:19:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Fri Dec 16 21:19:54 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.82"
[Fri Dec 16 21:58:46 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src18.ximg exists
[Fri Dec 16 21:58:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src18.csv
[Fri Dec 16 21:58:46 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src18_1.ximg exists
[Fri Dec 16 21:58:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src18.csv
[Fri Dec 16 21:58:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 21:58:46 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Fri Dec 16 21:58:46 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Dec 16 21:58:46 2011] Fit fullrun_ccd2_acisf11098_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Dec 16 23:06:46 2011] Spatial fit model total counts = 44.987400, observed total counts = 45.000000
[Fri Dec 16 23:06:46 2011] Offset between fit and detection position for source 9 = 0.033210 pixels
[Fri Dec 16 23:06:46 2011] 45.239500 total counts/ 17.913100 bgd. counts: snr = 6.456498
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.033210 pixels
  Position = (459.8, 987.7) = 12 14 13.19 -65 25 44.8
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 27.3 +/- 6.7
  Background counts = 17.9
  Rate = 0.0003 +/- 7e-05
[Fri Dec 16 23:06:46 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:46 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:46 2011] Source does appear to be extended
[Fri Dec 16 23:06:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 23:44:08 2011] Writing source region out to fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9_src.reg
[Fri Dec 16 23:44:08 2011] Extracting stamp from image fullrun_ccd2_acisf11098_pi14-548_cl_sm2.00.img.gz, (422, 950) - (497, 1025)
[Fri Dec 16 23:44:08 2011] Writing fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9.gif
[Fri Dec 16 23:54:09 2011] Size of ../../acisf11098/products/events/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9_src.evt.gz[events] = 37 counts
[Fri Dec 16 23:54:09 2011] Mean chipx,y = (126.03, 533.95)
[Fri Dec 16 23:54:09 2011] Mean tdetx,y = (3594.95, 3959.97)
[Fri Dec 16 23:54:09 2011] chipx,y range = (112.00-147.00, 515.00-552.00)
[Fri Dec 16 23:54:09 2011] Size of ../../acisf11098/products/events/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 145 counts
[Fri Dec 16 23:54:10 2011] Not generating rmf since there are only 27 counts
[Fri Dec 16 23:54:10 2011] arf not found, will run specextract
[Fri Dec 16 23:54:41 2011] ../../acisf11098/products/spectra/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9.warf not found
[Fri Dec 16 23:54:41 2011] ../../acisf11098/products/spectra/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9.wrmf not found
[Fri Dec 16 23:54:41 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9.soff failed
[Sat Dec 17 00:05:56 2011] Spectrum 9 has only 27 counts, deleting rmf
[Sat Dec 17 00:05:56 2011] 172.628
[Sat Dec 17 00:39:29 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:29 2011] Error reading totcts from fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9_src.pi.gz
[Sat Dec 17 00:39:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:30 2011] Using photon index=1.80, rate=0.000285, arf fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src9.arf
[Sat Dec 17 00:39:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:30 2011] Updating source flux to 4.3e-15
[Sat Dec 17 00:40:14 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting