[Fri Dec 16 15:49:47 2011] Detection parameters:
  Position = (952.0, 382.3) = 12 13 34.10 -65 30 41.5
  Extent = 2.5" x 1.8", rotation angle = 51 degrees
  Source counts = 48.7 +/- 8.2
  Background counts = 18.3
  Rate = 0.0005 +/- 9e-05

[Fri Dec 16 15:49:48 2011] Off-axis axis estimate = 7.83'
[Fri Dec 16 17:47:46 2011] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 17:47:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 17:47:46 2011] Initial guess for spatial extent in simple fitting = 2.71"
[Fri Dec 16 17:47:46 2011] source mask rpix=5.5, npix_max = 144, mask sum = 144, frac = 0.996
[Fri Dec 16 17:47:46 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.71"
[Fri Dec 16 18:29:38 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src5.ximg exists
[Fri Dec 16 18:29:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src5.csv
[Fri Dec 16 18:29:38 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Dec 16 18:29:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src5.csv
[Fri Dec 16 18:29:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11098_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 18:29:38 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec 16 18:29:38 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec 16 18:29:38 2011] Fit fullrun_ccd2_acisf11098_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Dec 16 19:48:34 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 30.715375 pixels away
[Fri Dec 16 19:48:34 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:34 2011] Assessing source extent using major
[Fri Dec 16 19:48:34 2011] Source does appear to be extended
[Fri Dec 16 19:48:34 2011] Computing asymmetry using major and minor axis, asym = 1.39
[Fri Dec 16 21:19:54 2011] Using EEF radius (= 2.71 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 21:19:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 21:19:54 2011] Initial guess for spatial extent in simple fitting = 2.71"
[Fri Dec 16 21:19:54 2011] source mask rpix=5.5, npix_max = 144, mask sum = 144, frac = 0.996
[Fri Dec 16 21:19:54 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 2.71"
[Fri Dec 16 21:58:46 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src5.ximg exists
[Fri Dec 16 21:58:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src5.csv
[Fri Dec 16 21:58:46 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src5_1.ximg exists
[Fri Dec 16 21:58:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src5.csv
[Fri Dec 16 21:58:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11098_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 21:58:46 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Fri Dec 16 21:58:46 2011] fullrun_ccd2_acisf11098_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Dec 16 21:58:46 2011] Fit fullrun_ccd2_acisf11098_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Dec 16 23:06:46 2011] Spatial fit model total counts = 80.729700, observed total counts = 81.000000
[Fri Dec 16 23:06:46 2011] Offset between fit and detection position for source 4 = 0.849498 pixels
[Fri Dec 16 23:06:46 2011] 81.568000 total counts/ 41.976800 bgd. counts: snr = 6.110743
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.849498 pixels
  Position = (951.2, 382.7) = 12 13 34.20 -65 30 41.6
  Extent = 2.3 (1.3-3.5)", rotation angle = 0
  Source counts = 39.6 +/- 9.0
  Background counts = 42.0
  Rate = 0.0004 +/- 9e-05
[Fri Dec 16 23:06:46 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:46 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:46 2011] Source does appear to be extended
[Fri Dec 16 23:06:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 23:44:08 2011] Writing source region out to fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4_src.reg
[Fri Dec 16 23:44:08 2011] Extracting stamp from image fullrun_ccd2_acisf11098_pi14-548_cl_sm2.00.img.gz, (848, 279) - (1055, 486)
[Fri Dec 16 23:44:08 2011] Writing fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4.gif
[Fri Dec 16 23:46:35 2011] Size of ../../acisf11098/products/events/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4_src.evt.gz[events] = 80 counts
[Fri Dec 16 23:46:35 2011] Mean chipx,y = (908.10, 567.62)
[Fri Dec 16 23:46:35 2011] Mean tdetx,y = (3628.62, 3177.90)
[Fri Dec 16 23:46:35 2011] chipx,y range = (885.00-940.00, 542.00-594.00)
[Fri Dec 16 23:46:35 2011] Size of ../../acisf11098/products/events/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 313 counts
[Fri Dec 16 23:46:36 2011] Not generating rmf since there are only 39 counts
[Fri Dec 16 23:46:36 2011] arf not found, will run specextract
[Fri Dec 16 23:47:05 2011] ../../acisf11098/products/spectra/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4.warf not found
[Fri Dec 16 23:47:05 2011] ../../acisf11098/products/spectra/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4.wrmf not found
[Fri Dec 16 23:47:05 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4.soff failed
[Sat Dec 17 00:05:56 2011] Spectrum 4 has only 40 counts, deleting rmf
[Sat Dec 17 00:05:56 2011] 163.216
[Sat Dec 17 00:39:29 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:29 2011] Error reading totcts from fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4_src.pi.gz
[Sat Dec 17 00:39:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:30 2011] Using photon index=1.80, rate=0.000413, arf fullrun_ccd2_acisf11098_pi14-548_pass1_cl_src4.arf
[Sat Dec 17 00:39:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:30 2011] Updating source flux to 6.4e-15
[Sat Dec 17 00:40:14 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting