[Fri Dec 16 15:49:09 2011] Detection parameters:
  Position = (987.6, 334.6) = 12 15 27.68 -65 30 26.3
  Extent = 0.6" x 0.5", rotation angle = 145 degrees
  Source counts = 13.8 +/- 4.9
  Background counts = 10.2
  Rate = 0.0001 +/- 5e-05

[Fri Dec 16 15:49:10 2011] Off-axis axis estimate = 4.89'
[Fri Dec 16 16:50:28 2011] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:50:28 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Fri Dec 16 16:50:28 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.792
[Fri Dec 16 16:50:28 2011] Giving source the simple spatial ID 47 for pass 0, mean size = 1.14"
[Fri Dec 16 17:47:46 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src47.ximg exists
[Fri Dec 16 17:47:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src47.csv
[Fri Dec 16 17:47:46 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src47_1.ximg exists
[Fri Dec 16 17:47:46 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src47.csv
[Fri Dec 16 17:47:46 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 17:47:46 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass0_tfrozen_src47.ximg exists
[Fri Dec 16 17:47:46 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Dec 16 17:47:46 2011] Fit fullrun_ccd1_acisf11098_pi14-548_cl_pass0_tfrozen_src47 appears to have run properly
[Fri Dec 16 19:48:29 2011] Spatial fit model total counts = 103.290000, observed total counts = 104.000000
[Fri Dec 16 19:48:29 2011] Offset between fit and detection position for source 26 = 0.506377 pixels
[Fri Dec 16 19:48:29 2011] 101.319300 total counts/ 83.709200 bgd. counts: snr = 1.924754
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.506377 pixels
  Position = (988.0, 334.8) = 12 15 27.68 -65 30 26.5
  Extent = 1.2 (0.4-2.3)", rotation angle = 0
  Source counts = 17.6 +/- 10.1
  Background counts = 83.7
  Rate = 0.0002 +/- 0.0001
[Fri Dec 16 19:48:29 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:29 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:48:29 2011] Source does appear to be extended
[Fri Dec 16 19:48:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 20:32:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 20:32:14 2011] Initial guess for spatial extent in simple fitting = 1.19"
[Fri Dec 16 20:32:14 2011] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.028
[Fri Dec 16 20:32:14 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 1.19"
[Fri Dec 16 21:19:53 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass1_src42.ximg exists
[Fri Dec 16 21:19:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11098_pi14-548_cl_pass1_src42.csv
[Fri Dec 16 21:19:53 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass1_src42_1.ximg exists
[Fri Dec 16 21:19:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11098_pi14-548_cl_pass1_src42.csv
[Fri Dec 16 21:19:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11098_pi14-548_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11098_pi14-548_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 21:19:54 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass1_tfrozen_src42.ximg exists
[Fri Dec 16 21:19:54 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Dec 16 21:19:54 2011] Fit fullrun_ccd1_acisf11098_pi14-548_cl_pass1_tfrozen_src42 appears to have run properly
[Fri Dec 16 23:06:42 2011] Warning, spatial fit 42 centroid is now closest to src. 27
[Fri Dec 16 23:06:42 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:42 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:42 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:42 2011] Source does appear to be extended
[Fri Dec 16 23:06:42 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 23:22:07 2011] Writing source region out to fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26_src.reg
[Fri Dec 16 23:22:07 2011] Extracting stamp from image fullrun_ccd1_acisf11098_pi14-548_cl_sm2.00.img.gz, (934, 280) - (1042, 389)
[Fri Dec 16 23:22:08 2011] Writing fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26.gif
[Fri Dec 16 23:42:52 2011] Size of ../../acisf11098/products/events/fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26_src.evt.gz[events] = 119 counts
[Fri Dec 16 23:42:52 2011] Mean chipx,y = (48.24, 451.30)
[Fri Dec 16 23:42:52 2011] Mean tdetx,y = (4680.70, 4155.24)
[Fri Dec 16 23:42:52 2011] chipx,y range = (26.00-72.00, 428.00-472.00)
[Fri Dec 16 23:42:52 2011] Size of ../../acisf11098/products/events/fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 808 counts
[Fri Dec 16 23:42:53 2011] Not generating rmf since there are only 17 counts
[Fri Dec 16 23:42:53 2011] arf not found, will run specextract
[Fri Dec 16 23:43:15 2011] ../../acisf11098/products/spectra/fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26.warf not found
[Fri Dec 16 23:43:15 2011] ../../acisf11098/products/spectra/fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26.wrmf not found
[Fri Dec 16 23:43:15 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26.soff failed
[Fri Dec 16 23:44:08 2011] Spectrum 26 has only 18 counts, deleting rmf
[Fri Dec 16 23:44:08 2011] 183.235
[Sat Dec 17 00:39:29 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:29 2011] Error reading totcts from fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26_src.pi.gz
[Sat Dec 17 00:39:29 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:29 2011] Using photon index=1.80, rate=0.000184, arf fullrun_ccd1_acisf11098_pi14-548_pass1_cl_src26.arf
[Sat Dec 17 00:39:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:29 2011] Updating source flux to 2.6e-15
[Sat Dec 17 00:39:52 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting