[Fri Dec 16 15:49:08 2011] Detection parameters:
  Position = (966.4, 747.3) = 12 15 29.26 -65 27 3.3
  Extent = 0.6" x 0.5", rotation angle = 60 degrees
  Source counts = 256.8 +/- 20.7
  Background counts = 170.2
  Rate = 0.003 +/- 0.0002

[Fri Dec 16 15:49:10 2011] Off-axis axis estimate = 4.67'
[Fri Dec 16 16:50:28 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:50:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 16:50:28 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Fri Dec 16 16:50:28 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.897
[Fri Dec 16 16:50:28 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.05"
[Fri Dec 16 17:47:45 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src1.ximg exists
[Fri Dec 16 17:47:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src1.csv
[Fri Dec 16 17:47:45 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Dec 16 17:47:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src1.csv
[Fri Dec 16 17:47:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11098_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 17:47:46 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 16 17:47:46 2011] fullrun_ccd1_acisf11098_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 16 17:47:46 2011] Fit fullrun_ccd1_acisf11098_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 16 19:48:29 2011] Spatial fit model total counts = 1061.990000, observed total counts = 1062.000000
[Fri Dec 16 19:48:29 2011] Offset between fit and detection position for source 1 = 0.858003 pixels
[Fri Dec 16 19:48:29 2011] 1060.169200 total counts/ 1029.950000 bgd. counts: snr = 0.941618
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.858003 pixels
  Position = (966.3, 746.5) = 12 15 29.31 -65 27 3.9
  Extent = 0.3 (0.3-0.6)", rotation angle = 0
  Source counts = 30.2 +/- 32.6
  Background counts = 1030.0
  Rate = 0.0003 +/- 0.0003
  Deleting source due to low Poisson probability