[Fri Dec 16 15:48:27 2011] Detection parameters:
  Position = (812.7, 1227.8) = 12 14 40.80 -65 17 30.2
  Extent = 2.0" x 1.8", rotation angle = 100 degrees
  Source counts = 43.4 +/- 8.9
  Background counts = 36.6
  Rate = 0.0005 +/- 9e-05

[Fri Dec 16 15:48:28 2011] Off-axis axis estimate = 10.72'
[Fri Dec 16 15:59:21 2011] Using EEF radius (= 5.10 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 15:59:21 2011] Initial guess for spatial extent in simple fitting = 5.10"
[Fri Dec 16 15:59:21 2011] source mask rpix=10.4, npix_max = 472, mask sum = 484, frac = 1.023
[Fri Dec 16 15:59:21 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 5.10"
[Fri Dec 16 16:50:28 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src27.ximg exists
[Fri Dec 16 16:50:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src27.csv
[Fri Dec 16 16:50:28 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src27_1.ximg exists
[Fri Dec 16 16:50:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src27.csv
[Fri Dec 16 16:50:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:50:28 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Fri Dec 16 16:50:28 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Dec 16 16:50:28 2011] Fit fullrun_ccd0_acisf11098_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Dec 16 19:48:23 2011] Spatial fit model total counts = 170.842000, observed total counts = 171.000000
[Fri Dec 16 19:48:23 2011] Offset between fit and detection position for source 31 = 1.045267 pixels
[Fri Dec 16 19:48:23 2011] 170.541800 total counts/ 130.133000 bgd. counts: snr = 3.542275
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.045267 pixels
  Position = (811.6, 1228.0) = 12 14 40.91 -65 17 30.4
  Extent = 3.3 (1.9-5.2)", rotation angle = 0
  Source counts = 40.4 +/- 13.1
  Background counts = 130.1
  Rate = 0.0004 +/- 0.0001
[Fri Dec 16 19:48:23 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:23 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:48:23 2011] Source does appear to be extended
[Fri Dec 16 19:48:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 19:49:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 19:49:07 2011] Initial guess for spatial extent in simple fitting = 3.26"
[Fri Dec 16 19:49:07 2011] source mask rpix=6.6, npix_max = 203, mask sum = 196, frac = 0.962
[Fri Dec 16 19:49:07 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 3.26"
[Fri Dec 16 20:32:14 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src20.ximg exists
[Fri Dec 16 20:32:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src20.csv
[Fri Dec 16 20:32:14 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src20_1.ximg exists
[Fri Dec 16 20:32:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src20.csv
[Fri Dec 16 20:32:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 20:32:14 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Fri Dec 16 20:32:14 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Dec 16 20:32:14 2011] Fit fullrun_ccd0_acisf11098_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Dec 16 23:06:36 2011] Warning, spatial fit 20 centroid is now closest to src. 3
[Fri Dec 16 23:06:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:36 2011] Source does appear to be extended
[Fri Dec 16 23:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 23:07:19 2011] Writing source region out to fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31_src.reg
[Fri Dec 16 23:07:19 2011] Extracting stamp from image fullrun_ccd0_acisf11098_pi14-548_cl_sm2.00.img.gz, (662, 1079) - (961, 1377)
[Fri Dec 16 23:07:19 2011] Writing fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31.gif
[Fri Dec 16 23:18:34 2011] Size of ../../acisf11098/products/events/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31_src.evt.gz[events] = 98 counts
[Fri Dec 16 23:18:34 2011] Mean chipx,y = (191.46, 121.88)
[Fri Dec 16 23:18:34 2011] Mean tdetx,y = (3182.88, 4940.54)
[Fri Dec 16 23:18:34 2011] chipx,y range = (159.00-223.00, 88.00-162.00)
[Fri Dec 16 23:18:35 2011] Size of ../../acisf11098/products/events/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31_bgd.evt.gz[events] = 518 counts
[Fri Dec 16 23:18:36 2011] Not generating rmf since there are only 40 counts
[Fri Dec 16 23:18:36 2011] arf not found, will run specextract
[Fri Dec 16 23:18:50 2011] ../../acisf11098/products/spectra/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31.warf not found
[Fri Dec 16 23:18:50 2011] ../../acisf11098/products/spectra/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31.wrmf not found
[Fri Dec 16 23:18:50 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31.soff failed
[Fri Dec 16 23:22:07 2011] Spectrum 31 has only 40 counts, deleting rmf
[Fri Dec 16 23:22:07 2011] 155.342
[Sat Dec 17 00:39:28 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:28 2011] Error reading totcts from fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31_src.pi.gz
[Sat Dec 17 00:39:28 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:28 2011] Using photon index=1.80, rate=0.000421, arf fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src31.arf
[Sat Dec 17 00:39:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:28 2011] Updating source flux to 6.9e-15
[Sat Dec 17 00:39:36 2011] Source 31 has fewer than 100.000000 counts, skipping spectral fitting