[Fri Dec 16 15:48:27 2011] Detection parameters:
  Position = (896.9, 991.9) = 12 14 34.17 -65 19 26.3
  Extent = 3.8" x 2.6", rotation angle = 119 degrees
  Source counts = 319.8 +/- 19.9
  Background counts = 75.2
  Rate = 0.003 +/- 0.0002

[Fri Dec 16 15:48:28 2011] Off-axis axis estimate = 8.86'
[Fri Dec 16 15:59:21 2011] Using EEF radius (= 3.47 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 15:59:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 15:59:21 2011] Initial guess for spatial extent in simple fitting = 3.47"
[Fri Dec 16 15:59:21 2011] source mask rpix=7.0, npix_max = 227, mask sum = 225, frac = 0.989
[Fri Dec 16 15:59:21 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.47"
[Fri Dec 16 16:50:28 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src1.ximg exists
[Fri Dec 16 16:50:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src1.csv
[Fri Dec 16 16:50:28 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Dec 16 16:50:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src1.csv
[Fri Dec 16 16:50:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11098_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:50:28 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 16 16:50:28 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 16 16:50:28 2011] Fit fullrun_ccd0_acisf11098_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 16 19:48:23 2011] Spatial fit model total counts = 420.998000, observed total counts = 421.000000
[Fri Dec 16 19:48:23 2011] Offset between fit and detection position for source 1 = 1.680379 pixels
[Fri Dec 16 19:48:23 2011] 420.946000 total counts/ 108.504000 bgd. counts: snr = 29.994839
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.680379 pixels
  Position = (898.5, 991.4) = 12 14 34.09 -65 19 26.8
  Extent = 3.2 (3.0-3.6)", rotation angle = 0
  Source counts = 312.4 +/- 20.5
  Background counts = 108.5
  Rate = 0.003 +/- 0.0002
[Fri Dec 16 19:48:23 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 19:48:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 19:48:23 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 19:48:23 2011] Source does appear to be extended
[Fri Dec 16 19:48:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 19:49:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 19:49:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 19:49:07 2011] Initial guess for spatial extent in simple fitting = 3.23"
[Fri Dec 16 19:49:07 2011] source mask rpix=6.6, npix_max = 199, mask sum = 210, frac = 1.051
[Fri Dec 16 19:49:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.23"
[Fri Dec 16 20:32:14 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src1.ximg exists
[Fri Dec 16 20:32:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src1.csv
[Fri Dec 16 20:32:14 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Dec 16 20:32:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src1.csv
[Fri Dec 16 20:32:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf11098_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 20:32:14 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Dec 16 20:32:14 2011] fullrun_ccd0_acisf11098_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Dec 16 20:32:14 2011] Fit fullrun_ccd0_acisf11098_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Dec 16 23:06:36 2011] Spatial fit model total counts = 401.871000, observed total counts = 404.000000
[Fri Dec 16 23:06:36 2011] Offset between fit and detection position for source 1 = 0.054066 pixels
[Fri Dec 16 23:06:36 2011] 401.557700 total counts/ 89.918700 bgd. counts: snr = 32.864482
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.054066 pixels
  Position = (898.5, 991.4) = 12 14 34.09 -65 19 26.8
  Extent = 3.3 (3.0-3.6)", rotation angle = 0
  Source counts = 311.6 +/- 20.0
  Background counts = 89.9
  Rate = 0.003 +/- 0.0002
[Fri Dec 16 23:06:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 23:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 23:06:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 23:06:36 2011] Source does appear to be extended
[Fri Dec 16 23:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 23:07:19 2011] Writing source region out to fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1_src.reg
[Fri Dec 16 23:07:19 2011] Extracting stamp from image fullrun_ccd0_acisf11098_pi14-548_cl_sm2.00.img.gz, (749, 842) - (1048, 1141)
[Fri Dec 16 23:07:19 2011] Writing fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1.gif
[Fri Dec 16 23:07:21 2011] Size of ../../acisf11098/products/events/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1_src.evt.gz[events] = 386 counts
[Fri Dec 16 23:07:21 2011] Mean chipx,y = (425.09, 216.06)
[Fri Dec 16 23:07:21 2011] Mean tdetx,y = (3277.06, 4706.91)
[Fri Dec 16 23:07:21 2011] chipx,y range = (386.00-456.00, 179.00-256.00)
[Fri Dec 16 23:07:21 2011] Size of ../../acisf11098/products/events/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 655 counts
[Fri Dec 16 23:07:22 2011] rmf not found, will run specextract
[Fri Dec 16 23:07:22 2011] arf not found, will run specextract
[Fri Dec 16 23:07:44 2011] ../../acisf11098/products/spectra/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1.warf not found
[Fri Dec 16 23:07:44 2011] ../../acisf11098/products/spectra/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1.wrmf not found
[Fri Dec 16 23:07:44 2011] Removal of ../../acisf11098/products/spectra/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1.soff failed
[Fri Dec 16 23:22:06 2011] Keeping rmf generated by specextract
[Fri Dec 16 23:22:06 2011] 165.45
[Sat Dec 17 00:39:28 2011] Updating aperture counts using extracted products
[Sat Dec 17 00:39:28 2011] Error reading totcts from fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Dec 17 00:39:28 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:28 2011] Using photon index=1.80, rate=0.00325, arf fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1.arf
[Sat Dec 17 00:39:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:28 2011] Updating source flux to 5e-14
[Sat Dec 17 00:39:52 2011] Reading fit data from acisf11098/analysis//spectral/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1_pl.csv
[Sat Dec 17 00:39:52 2011] Spectral fit parameter nH value = 6.13344e+21
[Sat Dec 17 00:39:52 2011] Spectral fit parameter PhoIndex value = 2.38658
[Sat Dec 17 00:39:52 2011] Failed to get F(0.3-8.0) from acisf11098/analysis//spectral/fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Dec 17 00:39:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 00:39:52 2011] Using Nh = 6.1e+21, photon index=2.39, rate=0.00325, arf fullrun_ccd0_acisf11098_pi14-548_pass1_cl_src1.arf
[Sat Dec 17 00:39:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Dec 17 00:39:52 2011] Updating source flux to 3.9e-14