[Tue Oct 18 04:08:42 2011] Detection parameters:
  Position = (1300.5, 701.6) = 0 50 57.23 -73 10 9.5
  Extent = 0.7" x 0.7", rotation angle = 78 degrees
  Source counts = 414.0 +/- 22.7
  Background counts = 101.0
  Rate = 0.02 +/- 0.001

[Tue Oct 18 04:08:42 2011] Off-axis axis estimate = 11.30'
[Tue Oct 18 04:09:25 2011] Using EEF radius (= 5.68 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 04:09:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 04:09:25 2011] Initial guess for spatial extent in simple fitting = 5.68"
[Tue Oct 18 04:09:25 2011] source mask rpix=11.5, npix_max = 580, mask sum = 577, frac = 0.994
[Tue Oct 18 04:09:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.68"
[Tue Oct 18 04:09:26 2011] fullrun_ccd2_acisf11095_pi14-548_cl_pass0_src1.ximg exists
[Tue Oct 18 04:09:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11095_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 04:09:26 2011] fullrun_ccd2_acisf11095_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Oct 18 04:09:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11095_pi14-548_cl_pass0_src1.csv
[Tue Oct 18 04:09:26 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11095_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11095_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 04:09:26 2011] fullrun_ccd2_acisf11095_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct 18 04:09:26 2011] fullrun_ccd2_acisf11095_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct 18 04:09:26 2011] Fit fullrun_ccd2_acisf11095_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct 18 04:09:30 2011] Spatial fit model total counts = 575.964000, observed total counts = 577.000000
[Tue Oct 18 04:09:30 2011] Offset between fit and detection position for source 1 = 0.792762 pixels
[Tue Oct 18 04:09:30 2011] 576.197200 total counts/ 64.188200 bgd. counts: snr = 63.907230
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.792762 pixels
  Position = (1300.1, 702.3) = 0 50 57.32 -73 10 9.3
  Extent = 5.5 (5.1-5.9)", rotation angle = 0
  Source counts = 512.0 +/- 24.0
  Background counts = 64.2
  Rate = 0.03 +/- 0.001
[Tue Oct 18 04:09:30 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 04:09:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 04:09:30 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 04:09:30 2011] Source does appear to be extended
[Tue Oct 18 04:09:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 04:09:46 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 04:09:46 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct 18 04:09:46 2011] Initial guess for spatial extent in simple fitting = 5.47"
[Tue Oct 18 04:09:46 2011] source mask rpix=11.1, npix_max = 540, mask sum = 508, frac = 0.940
[Tue Oct 18 04:09:46 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.47"
[Tue Oct 18 04:09:47 2011] fullrun_ccd2_acisf11095_pi14-548_cl_pass1_src1.ximg exists
[Tue Oct 18 04:09:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11095_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 04:09:47 2011] fullrun_ccd2_acisf11095_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Oct 18 04:09:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11095_pi14-548_cl_pass1_src1.csv
[Tue Oct 18 04:09:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11095_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11095_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 04:09:47 2011] fullrun_ccd2_acisf11095_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct 18 04:09:47 2011] fullrun_ccd2_acisf11095_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct 18 04:09:47 2011] Fit fullrun_ccd2_acisf11095_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct 18 04:09:51 2011] Spatial fit model total counts = 572.934000, observed total counts = 574.000000
[Tue Oct 18 04:09:51 2011] Offset between fit and detection position for source 1 = 0.047914 pixels
[Tue Oct 18 04:09:51 2011] 573.267500 total counts/ 62.819500 bgd. counts: snr = 64.402729
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.047914 pixels
  Position = (1300.1, 702.3) = 0 50 57.32 -73 10 9.4
  Extent = 5.5 (5.1-5.9)", rotation angle = 0
  Source counts = 510.4 +/- 23.9
  Background counts = 62.8
  Rate = 0.03 +/- 0.001
[Tue Oct 18 04:09:51 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 04:09:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 04:09:51 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 04:09:51 2011] Source does appear to be extended
[Tue Oct 18 04:09:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 04:10:06 2011] Not overwriting source region fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_src.reg
[Tue Oct 18 04:10:06 2011] Extracting stamp from image fullrun_ccd2_acisf11095_pi14-548_cl_sm2.00.img.gz, (1051, 453) - (1445, 952)
[Tue Oct 18 04:10:06 2011] Writing fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1.gif
[Tue Oct 18 04:10:06 2011] ../../acisf11095/products/events/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_src.evt and ../../acisf11095/products/events/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Oct 18 04:10:06 2011] Size of ../../acisf11095/products/events/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_src.evt.gz[events] = 565 counts
[Tue Oct 18 04:10:06 2011] Mean chipx,y = (892.70, 91.82)
[Tue Oct 18 04:10:06 2011] Mean tdetx,y = (3152.82, 3193.30)
[Tue Oct 18 04:10:06 2011] chipx,y range = (839.00-944.00, 45.00-141.00)
[Tue Oct 18 04:10:06 2011] Size of ../../acisf11095/products/events/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 225 counts
[Tue Oct 18 04:10:06 2011] ../../acisf11095/products/images/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_src.img and ../../acisf11095/products/images/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Oct 18 04:10:06 2011] ../../acisf11095/products/spectra/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_src.pi and ../../acisf11095/products/spectra/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Oct 18 04:10:09 2011] ../../acisf11095/products/lightcurves/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_src.lc and ../../acisf11095/products/lightcurves/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Oct 18 04:10:16 2011] Keeping rmf generated by specextract
[Tue Oct 18 04:10:16 2011] 150.573
[Tue Oct 18 04:10:58 2011] Updating aperture counts using extracted products
[Tue Oct 18 04:10:58 2011] Error reading totcts from fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Oct 18 04:10:58 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 04:10:58 2011] Using photon index=1.80, rate=0.0271, arf fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1.arf
[Tue Oct 18 04:10:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 04:10:58 2011] Updating source flux to 4.4e-13
[Tue Oct 18 04:11:08 2011] Reading fit data from acisf11095/analysis//spectral/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_pl.csv
[Tue Oct 18 04:11:08 2011] Spectral fit parameter nH value = 7.41626e+21
[Tue Oct 18 04:11:08 2011] Spectral fit parameter PhoIndex value = 1.25321
[Tue Oct 18 04:11:08 2011] Failed to get F(0.3-8.0) from acisf11095/analysis//spectral/fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Oct 18 04:11:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 04:11:08 2011] Using Nh = 7.4e+21, photon index=1.25, rate=0.0271, arf fullrun_ccd2_acisf11095_pi14-548_pass1_cl_src1.arf
[Tue Oct 18 04:11:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 04:11:08 2011] Updating source flux to 5.9e-13