[Fri Oct  7 09:13:38 2011] Detection parameters:
  Position = (221.8, 696.3) = 20 16 54.92 37 13 27.8
  Extent = 0.5" x 0.5", rotation angle = 36 degrees
  Source counts = 55.1 +/- 8.7
  Background counts = 20.9
  Rate = 0.0008 +/- 0.0001

[Fri Oct  7 09:13:40 2011] Off-axis axis estimate = 8.59'
[Fri Oct  7 09:15:22 2011] Using EEF radius (= 3.26 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 09:15:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 09:15:22 2011] Initial guess for spatial extent in simple fitting = 3.26"
[Fri Oct  7 09:15:22 2011] source mask rpix=6.6, npix_max = 202, mask sum = 182, frac = 0.897
[Fri Oct  7 09:15:22 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.26"
[Fri Oct  7 09:15:23 2011] fullrun_ccd2_acisf11092_pi14-548_cl_pass0_src3.ximg exists
[Fri Oct  7 09:15:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11092_pi14-548_cl_pass0_src3.csv
[Fri Oct  7 09:15:23 2011] fullrun_ccd2_acisf11092_pi14-548_cl_pass0_src3_1.ximg exists
[Fri Oct  7 09:15:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11092_pi14-548_cl_pass0_src3.csv
[Fri Oct  7 09:15:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11092_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11092_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 09:15:23 2011] fullrun_ccd2_acisf11092_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Fri Oct  7 09:15:23 2011] fullrun_ccd2_acisf11092_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Oct  7 09:15:23 2011] Fit fullrun_ccd2_acisf11092_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Oct  7 09:15:44 2011] Spatial fit model total counts = 117.031000, observed total counts = 116.000000
[Fri Oct  7 09:15:44 2011] Offset between fit and detection position for source 7 = 0.716045 pixels
[Fri Oct  7 09:15:44 2011] 117.900200 total counts/ 56.530700 bgd. counts: snr = 8.162260
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.716045 pixels
  Position = (221.5, 695.7) = 20 16 54.96 37 13 27.2
  Extent = 1.6 (1.1-2.5)", rotation angle = 0
  Source counts = 61.4 +/- 10.9
  Background counts = 56.5
  Rate = 0.0009 +/- 0.0002
[Fri Oct  7 09:15:44 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 09:15:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 09:15:44 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 09:15:44 2011] Source does appear to be extended
[Fri Oct  7 09:15:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 09:16:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 09:16:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct  7 09:16:12 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Fri Oct  7 09:16:12 2011] source mask rpix=3.2, npix_max = 53, mask sum = 42, frac = 0.780
[Fri Oct  7 09:16:12 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.56"
[Fri Oct  7 09:16:12 2011] fullrun_ccd2_acisf11092_pi14-548_cl_pass1_src3.ximg exists
[Fri Oct  7 09:16:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11092_pi14-548_cl_pass1_src3.csv
[Fri Oct  7 09:16:12 2011] fullrun_ccd2_acisf11092_pi14-548_cl_pass1_src3_1.ximg exists
[Fri Oct  7 09:16:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11092_pi14-548_cl_pass1_src3.csv
[Fri Oct  7 09:16:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11092_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11092_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 09:16:13 2011] fullrun_ccd2_acisf11092_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Fri Oct  7 09:16:13 2011] fullrun_ccd2_acisf11092_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Oct  7 09:16:13 2011] Fit fullrun_ccd2_acisf11092_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Oct  7 09:16:30 2011] Spatial fit model total counts = 77.322300, observed total counts = 76.000000
[Fri Oct  7 09:16:30 2011] Offset between fit and detection position for source 7 = 0.416019 pixels
[Fri Oct  7 09:16:30 2011] 77.296000 total counts/ 27.182600 bgd. counts: snr = 9.611881
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.416019 pixels
  Position = (221.9, 695.7) = 20 16 54.94 37 13 27.2
  Extent = 1.2 (0.9-1.6)", rotation angle = 0
  Source counts = 50.1 +/- 8.8
  Background counts = 27.2
  Rate = 0.0007 +/- 0.0001
[Fri Oct  7 09:16:30 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 09:16:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 09:16:30 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 09:16:30 2011] Source does appear to be extended
[Fri Oct  7 09:16:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 09:19:27 2011] Not overwriting source region fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_src.reg
[Fri Oct  7 09:19:27 2011] Extracting stamp from image fullrun_ccd2_acisf11092_pi14-548_cl_sm2.00.img.gz, (167, 641) - (277, 750)
[Fri Oct  7 09:19:27 2011] Writing fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7.gif
[Fri Oct  7 09:19:34 2011] ../../acisf11092/products/events/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_src.evt and ../../acisf11092/products/events/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Fri Oct  7 09:19:34 2011] Size of ../../acisf11092/products/events/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_src.evt.gz[events] = 70 counts
[Fri Oct  7 09:19:34 2011] Mean chipx,y = (673.81, 179.47)
[Fri Oct  7 09:19:34 2011] Mean tdetx,y = (3240.47, 3412.19)
[Fri Oct  7 09:19:34 2011] chipx,y range = (653.00-692.00, 160.00-198.00)
[Fri Oct  7 09:19:34 2011] Size of ../../acisf11092/products/events/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 68 counts
[Fri Oct  7 09:19:34 2011] ../../acisf11092/products/images/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_src.img and ../../acisf11092/products/images/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Fri Oct  7 09:19:34 2011] ../../acisf11092/products/spectra/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_src.pi and ../../acisf11092/products/spectra/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Fri Oct  7 09:19:34 2011] Not generating rmf since there are only 50 counts
[Fri Oct  7 09:19:38 2011] ../../acisf11092/products/lightcurves/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_src.lc and ../../acisf11092/products/lightcurves/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Fri Oct  7 09:21:25 2011] 157.35
[Fri Oct  7 09:23:05 2011] Updating aperture counts using extracted products
[Fri Oct  7 09:23:05 2011] Error reading totcts from fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_src.pi.gz
[Fri Oct  7 09:23:05 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 09:23:05 2011] Using photon index=1.80, rate=0.000724, arf fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7.arf
[Fri Oct  7 09:23:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 09:23:05 2011] Updating source flux to 1.3e-14
[Fri Oct  7 09:23:18 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 09:23:19 2011] acisf11092/analysis//spectral/fullrun_ccd2_acisf11092_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete