[Tue Nov  1 07:30:58 2011] Detection parameters:
  Position = (1084.2, 515.3) = 20 54 22.22 32 16 55.2
  Extent = 0.5" x 0.5", rotation angle = 84 degrees
  Source counts = 187.1 +/- 16.0
  Background counts = 68.9
  Rate = 0.005 +/- 0.0004

[Tue Nov  1 07:30:59 2011] Off-axis axis estimate = 0.91'
[Tue Nov  1 07:35:05 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 07:35:05 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Nov  1 07:35:05 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Tue Nov  1 07:35:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Tue Nov  1 07:35:08 2011] fullrun_ccd7_acisf11089_pi14-548_cl_pass0_src1.ximg exists
[Tue Nov  1 07:35:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11089_pi14-548_cl_pass0_src1.csv
[Tue Nov  1 07:35:08 2011] fullrun_ccd7_acisf11089_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Nov  1 07:35:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11089_pi14-548_cl_pass0_src1.csv
[Tue Nov  1 07:35:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11089_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11089_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 07:35:08 2011] fullrun_ccd7_acisf11089_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Nov  1 07:35:08 2011] fullrun_ccd7_acisf11089_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Nov  1 07:35:08 2011] Fit fullrun_ccd7_acisf11089_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Nov  1 07:35:18 2011] Spatial fit model total counts = 396.000000, observed total counts = 396.000000
[Tue Nov  1 07:35:18 2011] Offset between fit and detection position for source 3 = 0.573941 pixels
[Tue Nov  1 07:35:18 2011] 400.168000 total counts/ 226.066000 bgd. counts: snr = 11.579402
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.573941 pixels
  Position = (1084.5, 515.8) = 20 54 22.23 32 16 55.2
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 174.1 +/- 20.0
  Background counts = 226.1
  Rate = 0.004 +/- 0.0005
[Tue Nov  1 07:35:18 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 07:35:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 07:35:18 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 07:35:18 2011] Source does appear to be extended
[Tue Nov  1 07:35:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 07:35:35 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 07:35:35 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Tue Nov  1 07:35:35 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.195
[Tue Nov  1 07:35:35 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.43"
[Tue Nov  1 07:35:36 2011] fullrun_ccd7_acisf11089_pi14-548_cl_pass1_src1.ximg exists
[Tue Nov  1 07:35:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11089_pi14-548_cl_pass1_src1.csv
[Tue Nov  1 07:35:36 2011] fullrun_ccd7_acisf11089_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Nov  1 07:35:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11089_pi14-548_cl_pass1_src1.csv
[Tue Nov  1 07:35:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11089_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11089_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 07:35:36 2011] fullrun_ccd7_acisf11089_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Nov  1 07:35:36 2011] fullrun_ccd7_acisf11089_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Nov  1 07:35:36 2011] Fit fullrun_ccd7_acisf11089_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Nov  1 07:35:43 2011] Spatial fit model total counts = 405.000000, observed total counts = 405.000000
[Tue Nov  1 07:35:43 2011] Offset between fit and detection position for source 3 = 0.003430 pixels
[Tue Nov  1 07:35:43 2011] 407.104000 total counts/ 233.214000 bgd. counts: snr = 11.386685
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.003430 pixels
  Position = (1084.5, 515.8) = 20 54 22.23 32 16 55.2
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 173.9 +/- 20.2
  Background counts = 233.2
  Rate = 0.004 +/- 0.0005
[Tue Nov  1 07:35:43 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 07:35:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 07:35:43 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 07:35:43 2011] Source does appear to be extended
[Tue Nov  1 07:35:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 07:36:52 2011] Not overwriting source region fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_src.reg
[Tue Nov  1 07:36:52 2011] Extracting stamp from image fullrun_ccd7_acisf11089_pi14-548_cl_sm2.00.img.gz, (1065, 496) - (1104, 535)
[Tue Nov  1 07:36:52 2011] Writing fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3.gif
[Tue Nov  1 07:36:53 2011] ../../acisf11089/products/events/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_src.evt and ../../acisf11089/products/events/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Nov  1 07:36:53 2011] Size of ../../acisf11089/products/events/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_src.evt.gz[events] = 209 counts
[Tue Nov  1 07:36:53 2011] Mean chipx,y = (88.36, 545.66)
[Tue Nov  1 07:36:53 2011] Mean tdetx,y = (4005.36, 2247.66)
[Tue Nov  1 07:36:53 2011] chipx,y range = (68.00-107.00, 526.00-564.00)
[Tue Nov  1 07:36:53 2011] Size of ../../acisf11089/products/events/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 386 counts
[Tue Nov  1 07:36:53 2011] ../../acisf11089/products/images/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_src.img and ../../acisf11089/products/images/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Nov  1 07:36:53 2011] ../../acisf11089/products/spectra/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_src.pi and ../../acisf11089/products/spectra/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Nov  1 07:36:56 2011] ../../acisf11089/products/lightcurves/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_src.lc and ../../acisf11089/products/lightcurves/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Nov  1 07:37:33 2011] Keeping rmf generated by specextract
[Tue Nov  1 07:37:33 2011] 231.537
[Tue Nov  1 07:37:35 2011] Updating aperture counts using extracted products
[Tue Nov  1 07:37:35 2011] Error reading totcts from fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Nov  1 07:37:35 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 07:37:35 2011] Using photon index=1.80, rate=0.00428, arf fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3.arf
[Tue Nov  1 07:37:35 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 07:37:36 2011] Updating source flux to 3.4e-14
[Tue Nov  1 07:38:08 2011] Reading fit data from acisf11089/analysis//spectral/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_pl.csv
[Tue Nov  1 07:38:08 2011] Spectral fit parameter nH value = 3.66089e+19
[Tue Nov  1 07:38:08 2011] Spectral fit parameter PhoIndex value = 1.46871
[Tue Nov  1 07:38:08 2011] Failed to get F(0.3-8.0) from acisf11089/analysis//spectral/fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Nov  1 07:38:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 07:38:08 2011] Using Nh = 3.7e+19, photon index=1.47, rate=0.00428, arf fullrun_ccd7_acisf11089_pi14-548_pass1_cl_src3.arf
[Tue Nov  1 07:38:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 07:38:08 2011] Updating source flux to 3.7e-14