[Thu Feb 16 22:25:32 2012] Detection parameters:
  Position = (1050.1, 340.4) = 17 0 28.22 -46 19 28.1
  Extent = 1.6" x 1.1", rotation angle = 33 degrees
  Source counts = 140.4 +/- 13.8
  Background counts = 50.6
  Rate = 0.002 +/- 0.0002

[Thu Feb 16 22:25:33 2012] Off-axis axis estimate = 9.63'
[Thu Feb 16 22:54:27 2012] Using EEF radius (= 4.11 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 22:54:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 16 22:54:27 2012] Initial guess for spatial extent in simple fitting = 4.11"
[Thu Feb 16 22:54:27 2012] source mask rpix=8.3, npix_max = 312, mask sum = 306, frac = 0.978
[Thu Feb 16 22:54:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 4.11"
[Thu Feb 16 23:28:36 2012] fullrun_ccd6_acisf11087_pi14-548_cl_pass0_src1.ximg exists
[Thu Feb 16 23:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11087_pi14-548_cl_pass0_src1.csv
[Thu Feb 16 23:28:36 2012] fullrun_ccd6_acisf11087_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Feb 16 23:28:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11087_pi14-548_cl_pass0_src1.csv
[Thu Feb 16 23:28:36 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11087_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11087_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 23:28:37 2012] fullrun_ccd6_acisf11087_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 16 23:28:37 2012] fullrun_ccd6_acisf11087_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 16 23:28:37 2012] Fit fullrun_ccd6_acisf11087_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 16 23:59:43 2012] Spatial fit model total counts = 346.997000, observed total counts = 347.000000
[Thu Feb 16 23:59:43 2012] Offset between fit and detection position for source 1 = 6.715918 pixels
[Thu Feb 16 23:59:43 2012] 347.003700 total counts/ 67.948700 bgd. counts: snr = 33.853161
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 6.715918 pixels
  Position = (1044.9, 344.7) = 17 0 28.49 -46 19 26.2
  Extent = 5.3 (4.6-6.0)", rotation angle = 0
  Source counts = 279.1 +/- 18.6
  Background counts = 67.9
  Rate = 0.005 +/- 0.0003
[Thu Feb 16 23:59:43 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 23:59:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 23:59:43 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 23:59:43 2012] Source does appear to be extended
[Thu Feb 16 23:59:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 00:23:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 17 00:23:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 17 00:23:43 2012] Initial guess for spatial extent in simple fitting = 5.35"
[Fri Feb 17 00:23:43 2012] source mask rpix=10.9, npix_max = 516, mask sum = 506, frac = 0.979
[Fri Feb 17 00:23:43 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.35"
[Fri Feb 17 00:57:24 2012] fullrun_ccd6_acisf11087_pi14-548_cl_pass1_src1.ximg exists
[Fri Feb 17 00:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11087_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 00:57:24 2012] fullrun_ccd6_acisf11087_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Feb 17 00:57:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11087_pi14-548_cl_pass1_src1.csv
[Fri Feb 17 00:57:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11087_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11087_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 17 00:57:24 2012] fullrun_ccd6_acisf11087_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Feb 17 00:57:24 2012] fullrun_ccd6_acisf11087_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Feb 17 00:57:24 2012] Fit fullrun_ccd6_acisf11087_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Feb 17 01:24:45 2012] Spatial fit model total counts = 425.999000, observed total counts = 426.000000
[Fri Feb 17 01:24:45 2012] Offset between fit and detection position for source 1 = 0.195660 pixels
[Fri Feb 17 01:24:45 2012] 426.351000 total counts/ 165.547000 bgd. counts: snr = 20.269993
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.195660 pixels
  Position = (1044.7, 344.5) = 17 0 28.50 -46 19 26.3
  Extent = 5.1 (4.5-5.6)", rotation angle = 0
  Source counts = 260.8 +/- 20.6
  Background counts = 165.5
  Rate = 0.005 +/- 0.0004
[Fri Feb 17 01:24:45 2012] Vigneting correction estimate = 1.000000
[Fri Feb 17 01:24:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 17 01:24:45 2012] Assessing source extent using major axis lower bound
[Fri Feb 17 01:24:45 2012] Source does appear to be extended
[Fri Feb 17 01:24:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 17 01:29:54 2012] Writing source region out to fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1_src.reg
[Fri Feb 17 01:29:54 2012] Extracting stamp from image fullrun_ccd6_acisf11087_pi14-548_cl_sm2.00.img.gz, (812, 111) - (1278, 578)
[Fri Feb 17 01:29:54 2012] Writing fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1.gif
[Fri Feb 17 01:29:56 2012] Size of ../../acisf11087/products/events/fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1_src.evt.gz[events] = 377 counts
[Fri Feb 17 01:29:56 2012] Mean chipx,y = (93.88, 789.59)
[Fri Feb 17 01:29:56 2012] Mean tdetx,y = (2968.88, 2491.59)
[Fri Feb 17 01:29:56 2012] chipx,y range = (37.00-146.00, 738.00-841.00)
[Fri Feb 17 01:29:56 2012] Size of ../../acisf11087/products/events/fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 1038 counts
[Fri Feb 17 01:29:57 2012] rmf not found, will run specextract
[Fri Feb 17 01:29:57 2012] arf not found, will run specextract
[Fri Feb 17 01:30:32 2012] ../../acisf11087/products/spectra/fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1.warf not found
[Fri Feb 17 01:30:32 2012] ../../acisf11087/products/spectra/fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1.wrmf not found
[Fri Feb 17 01:30:32 2012] Removal of ../../acisf11087/products/spectra/fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1.soff failed
[Fri Feb 17 01:41:58 2012] Keeping rmf generated by specextract
[Fri Feb 17 01:41:58 2012] 166.089
[Fri Feb 17 01:52:53 2012] Updating aperture counts using extracted products
[Fri Feb 17 01:52:53 2012] Error reading totcts from fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Feb 17 01:52:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 01:52:53 2012] Using photon index=1.80, rate=0.00461, arf fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1.arf
[Fri Feb 17 01:52:53 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 01:52:53 2012] Updating source flux to 7e-14
[Fri Feb 17 01:53:04 2012] Reading fit data from acisf11087/analysis//spectral/fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1_pl.csv
[Fri Feb 17 01:53:04 2012] Spectral fit parameter nH value = 4.16821e+21
[Fri Feb 17 01:53:04 2012] Spectral fit parameter PhoIndex value = 4.71776
[Fri Feb 17 01:53:04 2012] Failed to get F(0.3-8.0) from acisf11087/analysis//spectral/fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Feb 17 01:53:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 17 01:53:04 2012] Using Nh = 4.2e+21, photon index=4.72, rate=0.00461, arf fullrun_ccd6_acisf11087_pi14-548_pass1_cl_src1.arf
[Fri Feb 17 01:53:04 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 17 01:53:04 2012] Updating source flux to 3.6e-14