[Wed Oct 19 23:03:33 2011] Detection parameters:
  Position = (844.1, 360.3) = 0 20 23.47 59 14 44.4
  Extent = 0.7" x 0.5", rotation angle = 2 degrees
  Source counts = 19.1 +/- 4.5
  Background counts = 0.9
  Rate = 0.001 +/- 0.0003

[Wed Oct 19 23:03:33 2011] Off-axis axis estimate = 3.61'
[Wed Oct 19 23:43:40 2011] Using EEF radius (= 0.72 ")to estimate initial spatial extent for simple fitting
[Wed Oct 19 23:43:40 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct 19 23:43:40 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Wed Oct 19 23:43:40 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.038
[Wed Oct 19 23:43:40 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.72"
[Wed Oct 19 23:58:50 2011] fullrun_ccd7_acisf11086_pi14-548_cl_pass0_src8.ximg exists
[Wed Oct 19 23:58:50 2011] fullrun_ccd7_acisf11086_pi14-548_cl_pass0_src8_1.ximg exists
[Wed Oct 19 23:58:50 2011] Fit fullrun_ccd7_acisf11086_pi14-548_cl_pass0_src8 appears to have run properly
[Wed Oct 19 23:58:50 2011] fullrun_ccd7_acisf11086_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Wed Oct 19 23:58:50 2011] fullrun_ccd7_acisf11086_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Oct 19 23:58:50 2011] Fit fullrun_ccd7_acisf11086_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Wed Oct 19 23:58:55 2011] Spatial fit model total counts = 20.763300, observed total counts = 22.000000
[Wed Oct 19 23:58:55 2011] Offset between fit and detection position for source 26 = 0.952155 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.952155 pixels
  Position = (844.9, 360.8) = 0 20 23.45 59 14 44.4
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 20.0 +/- 4.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Wed Oct 19 23:58:55 2011] Vigneting correction estimate = 1.000000
[Wed Oct 19 23:58:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 19 23:58:55 2011] Assessing source extent using major axis lower bound
[Wed Oct 19 23:58:55 2011] Source does appear to be extended
[Wed Oct 19 23:58:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 00:18:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 20 00:18:21 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Thu Oct 20 00:18:21 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.941
[Thu Oct 20 00:18:21 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.77"
[Thu Oct 20 00:30:25 2011] fullrun_ccd7_acisf11086_pi14-548_cl_pass1_src8.ximg exists
[Thu Oct 20 00:30:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11086_pi14-548_cl_pass1_src8.csv
[Thu Oct 20 00:30:25 2011] fullrun_ccd7_acisf11086_pi14-548_cl_pass1_src8_1.ximg exists
[Thu Oct 20 00:30:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11086_pi14-548_cl_pass1_src8.csv
[Thu Oct 20 00:30:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11086_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11086_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 00:30:25 2011] fullrun_ccd7_acisf11086_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Thu Oct 20 00:30:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11086_pi14-548_cl_pass1_tfrozen_src8.csv
[Thu Oct 20 00:30:25 2011] fullrun_ccd7_acisf11086_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Oct 20 00:30:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11086_pi14-548_cl_pass1_tfrozen_src8.csv
[Thu Oct 20 00:30:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11086_pi14-548_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11086_pi14-548_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 20 00:30:30 2011] Spatial fit model total counts = 18.764600, observed total counts = 21.000000
[Thu Oct 20 00:30:30 2011] Offset between fit and detection position for source 26 = 0.113317 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.113317 pixels
  Position = (844.8, 360.8) = 0 20 23.46 59 14 44.4
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 18.1 +/- 4.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0003
[Thu Oct 20 00:30:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct 20 00:30:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 20 00:30:30 2011] Assessing source extent using major axis lower bound
[Thu Oct 20 00:30:30 2011] Source does appear to be extended
[Thu Oct 20 00:30:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 20 00:36:52 2011] Writing source region out to fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26_src.reg
[Thu Oct 20 00:36:52 2011] Extracting stamp from image fullrun_ccd7_acisf11086_pi14-548_cl_sm2.00.img.gz, (808, 324) - (882, 398)
[Thu Oct 20 00:36:52 2011] Writing fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26.gif
[Thu Oct 20 00:38:48 2011] Size of ../../acisf11086/products/events/fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26_src.evt.gz[events] = 20 counts
[Thu Oct 20 00:38:48 2011] Mean chipx,y = (469.40, 163.05)
[Thu Oct 20 00:38:48 2011] Mean tdetx,y = (4386.40, 1865.05)
[Thu Oct 20 00:38:48 2011] chipx,y range = (449.00-484.00, 145.00-179.00)
[Thu Oct 20 00:38:48 2011] Size of ../../acisf11086/products/events/fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26_bgd.evt.gz[events] = 16 counts
[Thu Oct 20 00:38:49 2011] Not generating rmf since there are only 18 counts
[Thu Oct 20 00:38:49 2011] arf not found, will run specextract
[Thu Oct 20 00:38:56 2011] ../../acisf11086/products/spectra/fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26.warf not found
[Thu Oct 20 00:38:56 2011] ../../acisf11086/products/spectra/fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26.wrmf not found
[Thu Oct 20 00:38:56 2011] Removal of ../../acisf11086/products/spectra/fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26.soff failed
[Thu Oct 20 00:42:39 2011] Spectrum 26 has only 18 counts, deleting rmf
[Thu Oct 20 00:42:39 2011] 223.209
[Thu Oct 20 00:42:42 2011] Updating aperture counts using extracted products
[Thu Oct 20 00:42:42 2011] Error reading totcts from fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26_src.pi.gz
[Thu Oct 20 00:42:42 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 20 00:42:42 2011] Using photon index=1.80, rate=0.00122, arf fullrun_ccd7_acisf11086_pi14-548_pass1_cl_src26.arf
[Thu Oct 20 00:42:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 20 00:42:42 2011] Updating source flux to 1.2e-14
[Thu Oct 20 00:42:48 2011] Source 26 has fewer than 100.000000 counts, skipping spectral fitting