[Sat Sep 24 14:16:22 2011] Detection parameters:
  Position = (266.7, 872.8) = 0 20 12.65 59 15 1.4
  Extent = 0.8" x 0.5", rotation angle = 150 degrees
  Source counts = 52.2 +/- 7.3
  Background counts = 0.8
  Rate = 0.004 +/- 0.0005

[Sat Sep 24 14:16:22 2011] Off-axis axis estimate = 2.97'
[Sat Sep 24 14:17:11 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:17:11 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 14:17:11 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Sat Sep 24 14:17:11 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.810
[Sat Sep 24 14:17:11 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.57"
[Sat Sep 24 14:17:11 2011] fullrun_ccd6_acisf11080_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 14:17:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11080_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 14:17:11 2011] fullrun_ccd6_acisf11080_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 14:17:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11080_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 14:17:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11080_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11080_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:17:11 2011] fullrun_ccd6_acisf11080_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 14:17:11 2011] fullrun_ccd6_acisf11080_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 14:17:11 2011] Fit fullrun_ccd6_acisf11080_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 14:17:16 2011] Spatial fit model total counts = 53.819100, observed total counts = 54.000000
[Sat Sep 24 14:17:16 2011] Offset between fit and detection position for source 10 = 0.755319 pixels
[Sat Sep 24 14:17:16 2011] 54.223120 total counts/ 4.914320 bgd. counts: snr = 22.242967
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.755319 pixels
  Position = (267.3, 873.3) = 0 20 12.64 59 15 1.4
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 49.3 +/- 7.4
  Background counts = 4.9
  Rate = 0.003 +/- 0.0005
[Sat Sep 24 14:17:16 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:17:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:17:16 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:17:16 2011] Source does appear to be extended
[Sat Sep 24 14:17:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:17:33 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 14:17:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 14:17:33 2011] Initial guess for spatial extent in simple fitting = 0.72"
[Sat Sep 24 14:17:33 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.033
[Sat Sep 24 14:17:33 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.72"
[Sat Sep 24 14:17:33 2011] fullrun_ccd6_acisf11080_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 14:17:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11080_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 14:17:33 2011] fullrun_ccd6_acisf11080_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 14:17:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf11080_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 14:17:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf11080_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf11080_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 14:17:33 2011] fullrun_ccd6_acisf11080_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 14:17:33 2011] fullrun_ccd6_acisf11080_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 14:17:33 2011] Fit fullrun_ccd6_acisf11080_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 14:17:39 2011] Spatial fit model total counts = 53.813200, observed total counts = 54.000000
[Sat Sep 24 14:17:39 2011] Offset between fit and detection position for source 10 = 0.033008 pixels
[Sat Sep 24 14:17:39 2011] 54.230290 total counts/ 4.779890 bgd. counts: snr = 22.618347
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.033008 pixels
  Position = (267.3, 873.2) = 0 20 12.64 59 15 1.4
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 49.5 +/- 7.4
  Background counts = 4.8
  Rate = 0.003 +/- 0.0005
[Sat Sep 24 14:17:39 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 14:17:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 14:17:39 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 14:17:39 2011] Source does appear to be extended
[Sat Sep 24 14:17:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 14:18:13 2011] Not overwriting source region fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_src.reg
[Sat Sep 24 14:18:13 2011] Extracting stamp from image fullrun_ccd6_acisf11080_pi14-548_cl_sm2.00.img.gz, (234, 840) - (301, 907)
[Sat Sep 24 14:18:13 2011] Writing fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10.gif
[Sat Sep 24 14:18:13 2011] ../../acisf11080/products/events/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_src.evt and ../../acisf11080/products/events/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Sep 24 14:18:13 2011] Size of ../../acisf11080/products/events/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_src.evt.gz[events] = 53 counts
[Sat Sep 24 14:18:13 2011] Mean chipx,y = (935.64, 304.91)
[Sat Sep 24 14:18:13 2011] Mean tdetx,y = (3810.64, 2006.91)
[Sat Sep 24 14:18:13 2011] chipx,y range = (918.00-955.00, 288.00-325.00)
[Sat Sep 24 14:18:13 2011] Size of ../../acisf11080/products/events/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 8 counts
[Sat Sep 24 14:18:13 2011] ../../acisf11080/products/images/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_src.img and ../../acisf11080/products/images/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Sep 24 14:18:13 2011] ../../acisf11080/products/spectra/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_src.pi and ../../acisf11080/products/spectra/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Sep 24 14:18:13 2011] Not generating rmf since there are only 49 counts
[Sat Sep 24 14:18:16 2011] ../../acisf11080/products/lightcurves/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_src.lc and ../../acisf11080/products/lightcurves/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Sep 24 14:18:43 2011] 204.169
[Sat Sep 24 14:19:30 2011] Updating aperture counts using extracted products
[Sat Sep 24 14:19:30 2011] Error reading totcts from fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Sep 24 14:19:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 14:19:30 2011] Using photon index=1.80, rate=0.00333, arf fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10.arf
[Sat Sep 24 14:19:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 14:19:30 2011] Updating source flux to 4e-14
[Sat Sep 24 14:19:39 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep 24 14:19:40 2011] acisf11080/analysis//spectral/fullrun_ccd6_acisf11080_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete