[Sun Oct 16 03:11:00 2011] Detection parameters:
  Position = (756.1, 163.7) = 17 14 41.26 -29 27 6.2
  Extent = 0.7" x 0.5", rotation angle = 2 degrees
  Source counts = 39.4 +/- 6.6
  Background counts = 3.6
  Rate = 0.0004 +/- 7e-05

[Sun Oct 16 03:11:03 2011] Off-axis axis estimate = 1.96'
[Sun Oct 16 03:12:55 2011] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:12:55 2011] Initial guess for spatial extent in simple fitting = 0.43"
[Sun Oct 16 03:12:55 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.803
[Sun Oct 16 03:12:55 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 0.43"
[Sun Oct 16 03:12:57 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src15.ximg exists
[Sun Oct 16 03:12:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src15.csv
[Sun Oct 16 03:12:57 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src15_1.ximg exists
[Sun Oct 16 03:12:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src15.csv
[Sun Oct 16 03:12:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:12:58 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sun Oct 16 03:12:58 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Oct 16 03:12:58 2011] Fit fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Oct 16 03:13:24 2011] Spatial fit model total counts = 50.973400, observed total counts = 51.000000
[Sun Oct 16 03:13:24 2011] Offset between fit and detection position for source 9 = 1.006545 pixels
[Sun Oct 16 03:13:24 2011] 52.187500 total counts/ 17.335400 bgd. counts: snr = 8.370705
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.006545 pixels
  Position = (756.8, 164.4) = 17 14 41.25 -29 27 6.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 34.9 +/- 7.2
  Background counts = 17.3
  Rate = 0.0004 +/- 7e-05
[Sun Oct 16 03:13:24 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:13:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:13:24 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:13:24 2011] Source does appear to be extended
[Sun Oct 16 03:13:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:13:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:13:58 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sun Oct 16 03:13:58 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.144
[Sun Oct 16 03:13:58 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.44"
[Sun Oct 16 03:14:00 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src15.ximg exists
[Sun Oct 16 03:14:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src15.csv
[Sun Oct 16 03:14:00 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src15_1.ximg exists
[Sun Oct 16 03:14:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src15.csv
[Sun Oct 16 03:14:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:14:01 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sun Oct 16 03:14:01 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Oct 16 03:14:01 2011] Fit fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Oct 16 03:14:27 2011] Spatial fit model total counts = 51.999900, observed total counts = 52.000000
[Sun Oct 16 03:14:27 2011] Offset between fit and detection position for source 9 = 0.012597 pixels
[Sun Oct 16 03:14:27 2011] 52.879400 total counts/ 18.039600 bgd. counts: snr = 8.202801
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.012597 pixels
  Position = (756.8, 164.4) = 17 14 41.25 -29 27 6.1
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 34.8 +/- 7.3
  Background counts = 18.0
  Rate = 0.0004 +/- 7e-05
[Sun Oct 16 03:14:27 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:14:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:14:27 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:14:27 2011] Source does appear to be extended
[Sun Oct 16 03:14:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:20:10 2011] Not overwriting source region fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_src.reg
[Sun Oct 16 03:20:10 2011] Extracting stamp from image fullrun_ccd3_acisf11073_pi14-548_cl_sm2.00.img.gz, (737, 144) - (777, 185)
[Sun Oct 16 03:20:10 2011] Writing fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9.gif
[Sun Oct 16 03:20:55 2011] ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_src.evt and ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Oct 16 03:20:55 2011] Size of ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_src.evt.gz[events] = 39 counts
[Sun Oct 16 03:20:55 2011] Mean chipx,y = (741.28, 919.82)
[Sun Oct 16 03:20:55 2011] Mean tdetx,y = (4212.18, 3802.28)
[Sun Oct 16 03:20:55 2011] chipx,y range = (722.00-761.00, 899.00-941.00)
[Sun Oct 16 03:20:55 2011] Size of ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 25 counts
[Sun Oct 16 03:20:55 2011] ../../acisf11073/products/images/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_src.img and ../../acisf11073/products/images/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Oct 16 03:20:55 2011] ../../acisf11073/products/spectra/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_src.pi and ../../acisf11073/products/spectra/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Oct 16 03:20:55 2011] Not generating rmf since there are only 34 counts
[Sun Oct 16 03:20:58 2011] ../../acisf11073/products/lightcurves/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_src.lc and ../../acisf11073/products/lightcurves/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Oct 16 03:22:43 2011] 197.409
[Sun Oct 16 03:23:02 2011] Updating aperture counts using extracted products
[Sun Oct 16 03:23:02 2011] Error reading totcts from fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9_src.pi.gz
[Sun Oct 16 03:23:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 03:23:02 2011] Using photon index=1.80, rate=0.000358, arf fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src9.arf
[Sun Oct 16 03:23:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 03:23:02 2011] Updating source flux to 4.2e-15
[Sun Oct 16 03:23:37 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting