[Sun Oct 16 03:11:03 2011] Detection parameters:
  Position = (515.9, 592.2) = 17 14 50.30 -29 23 35.3
  Extent = 0.9" x 0.6", rotation angle = 31 degrees
  Source counts = 10.7 +/- 3.7
  Background counts = 3.3
  Rate = 0.0001 +/- 4e-05

[Sun Oct 16 03:11:03 2011] Off-axis axis estimate = 5.86'
[Sun Oct 16 03:12:55 2011] Using EEF radius (= 1.56 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:12:55 2011] Initial guess for spatial extent in simple fitting = 1.56"
[Sun Oct 16 03:12:55 2011] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.038
[Sun Oct 16 03:12:55 2011] Giving source the simple spatial ID 50 for pass 0, mean size = 1.56"
[Sun Oct 16 03:12:57 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src50.ximg exists
[Sun Oct 16 03:12:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src50.csv
[Sun Oct 16 03:12:57 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src50_1.ximg exists
[Sun Oct 16 03:12:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src50.csv
[Sun Oct 16 03:12:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:12:58 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src50.ximg exists
[Sun Oct 16 03:12:58 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src50_1.ximg exists
[Sun Oct 16 03:12:58 2011] Fit fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src50 appears to have run properly
[Sun Oct 16 03:13:24 2011] Spatial fit model total counts = 26.965200, observed total counts = 27.000000
[Sun Oct 16 03:13:24 2011] Offset between fit and detection position for source 67 = 0.968221 pixels
[Sun Oct 16 03:13:24 2011] 26.896590 total counts/ 19.795100 bgd. counts: snr = 1.596139
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.968221 pixels
  Position = (516.8, 592.7) = 17 14 50.29 -29 23 35.3
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 7.1 +/- 5.2
  Background counts = 19.8
  Rate = 7e-05 +/- 5e-05
  Deleting source due to low Poisson probability