[Sun Oct 16 03:11:02 2011] Detection parameters:
  Position = (914.1, 308.5) = 17 14 35.31 -29 25 54.9
  Extent = 0.5" x 0.5", rotation angle = 164 degrees
  Source counts = 15.1 +/- 4.2
  Background counts = 2.9
  Rate = 0.0002 +/- 4e-05

[Sun Oct 16 03:11:03 2011] Off-axis axis estimate = 2.34'
[Sun Oct 16 03:12:55 2011] Using EEF radius (= 0.47 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:12:55 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sun Oct 16 03:12:55 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.064
[Sun Oct 16 03:12:55 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 0.47"
[Sun Oct 16 03:12:57 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src43.ximg exists
[Sun Oct 16 03:12:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src43.csv
[Sun Oct 16 03:12:57 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src43_1.ximg exists
[Sun Oct 16 03:12:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src43.csv
[Sun Oct 16 03:12:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:12:58 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src43.ximg exists
[Sun Oct 16 03:12:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src43.csv
[Sun Oct 16 03:12:58 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Oct 16 03:12:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src43.csv
[Sun Oct 16 03:12:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:13:24 2011] Spatial fit model total counts = 21.690800, observed total counts = 24.000000
[Sun Oct 16 03:13:24 2011] Offset between fit and detection position for source 52 = 0.705342 pixels
[Sun Oct 16 03:13:24 2011] 21.443140 total counts/ 3.385740 bgd. counts: snr = 9.813601
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.705342 pixels
  Position = (914.6, 308.9) = 17 14 35.31 -29 25 55.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 18.1 +/- 4.6
  Background counts = 3.4
  Rate = 0.0002 +/- 5e-05
[Sun Oct 16 03:13:24 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:13:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:13:24 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:13:24 2011] Source does appear to be extended
[Sun Oct 16 03:13:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:13:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:13:58 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Sun Oct 16 03:13:58 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.081
[Sun Oct 16 03:13:58 2011] Giving source the simple spatial ID 43 for pass 1, mean size = 0.70"
[Sun Oct 16 03:14:01 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src43.ximg exists
[Sun Oct 16 03:14:01 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src43_1.ximg exists
[Sun Oct 16 03:14:01 2011] Fit fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src43 appears to have run properly
[Sun Oct 16 03:14:02 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src43.ximg exists
[Sun Oct 16 03:14:02 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src43_1.ximg exists
[Sun Oct 16 03:14:02 2011] Fit fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src43 appears to have run properly
[Sun Oct 16 03:14:27 2011] Spatial fit model total counts = 24.204700, observed total counts = 26.000000
[Sun Oct 16 03:14:27 2011] Offset between fit and detection position for source 52 = 0.028717 pixels
[Sun Oct 16 03:14:27 2011] 24.009950 total counts/ 5.997450 bgd. counts: snr = 7.355135
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.028717 pixels
  Position = (914.7, 308.9) = 17 14 35.31 -29 25 55.0
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 18.0 +/- 4.9
  Background counts = 6.0
  Rate = 0.0002 +/- 5e-05
[Sun Oct 16 03:14:27 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:14:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:14:27 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:14:27 2011] Source does appear to be extended
[Sun Oct 16 03:14:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:20:11 2011] Not overwriting source region fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_src.reg
[Sun Oct 16 03:20:11 2011] Extracting stamp from image fullrun_ccd3_acisf11073_pi14-548_cl_sm2.00.img.gz, (882, 276) - (948, 342)
[Sun Oct 16 03:20:11 2011] Writing fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52.gif
[Sun Oct 16 03:22:14 2011] ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_src.evt and ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_bgd.evt exist, delete to re-create
[Sun Oct 16 03:22:14 2011] Size of ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_src.evt.gz[events] = 18 counts
[Sun Oct 16 03:22:14 2011] Mean chipx,y = (870.06, 746.94)
[Sun Oct 16 03:22:14 2011] Mean tdetx,y = (4385.06, 3931.06)
[Sun Oct 16 03:22:14 2011] chipx,y range = (855.00-888.00, 730.00-768.00)
[Sun Oct 16 03:22:14 2011] Size of ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_bgd.evt.gz[events] = 58 counts
[Sun Oct 16 03:22:14 2011] ../../acisf11073/products/images/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_src.img and ../../acisf11073/products/images/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_bgd.img exist, delete to re-create
[Sun Oct 16 03:22:14 2011] ../../acisf11073/products/spectra/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_src.pi and ../../acisf11073/products/spectra/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_bgd.pi exist, delete to re-create
[Sun Oct 16 03:22:14 2011] Not generating rmf since there are only 18 counts
[Sun Oct 16 03:22:17 2011] ../../acisf11073/products/lightcurves/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_src.lc and ../../acisf11073/products/lightcurves/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_bgd.lc exist, delete to re-create
[Sun Oct 16 03:22:44 2011] 199.706
[Sun Oct 16 03:23:02 2011] Updating aperture counts using extracted products
[Sun Oct 16 03:23:02 2011] Error reading totcts from fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52_src.pi.gz
[Sun Oct 16 03:23:03 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 03:23:03 2011] Using photon index=1.80, rate=0.000185, arf fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src52.arf
[Sun Oct 16 03:23:03 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 03:23:03 2011] Updating source flux to 2.1e-15
[Sun Oct 16 03:23:37 2011] Source 52 has fewer than 100.000000 counts, skipping spectral fitting