[Sun Oct 16 03:11:01 2011] Detection parameters:
  Position = (509.5, 403.3) = 17 14 50.55 -29 25 8.2
  Extent = 0.9" x 0.5", rotation angle = 57 degrees
  Source counts = 88.3 +/- 9.7
  Background counts = 5.7
  Rate = 0.0009 +/- 0.0001

[Sun Oct 16 03:11:03 2011] Off-axis axis estimate = 4.77'
[Sun Oct 16 03:12:55 2011] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:12:55 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Sun Oct 16 03:12:55 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.847
[Sun Oct 16 03:12:55 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 1.09"
[Sun Oct 16 03:12:56 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src9.ximg exists
[Sun Oct 16 03:12:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src9.csv
[Sun Oct 16 03:12:56 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src9_1.ximg exists
[Sun Oct 16 03:12:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src9.csv
[Sun Oct 16 03:12:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11073_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:12:58 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Sun Oct 16 03:12:58 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Oct 16 03:12:58 2011] Fit fullrun_ccd3_acisf11073_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Oct 16 03:13:24 2011] Spatial fit model total counts = 103.952000, observed total counts = 104.000000
[Sun Oct 16 03:13:24 2011] Offset between fit and detection position for source 15 = 0.662140 pixels
[Sun Oct 16 03:13:24 2011] 106.050700 total counts/ 29.496900 bgd. counts: snr = 14.095438
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.662140 pixels
  Position = (509.8, 403.9) = 17 14 50.55 -29 25 8.2
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 76.6 +/- 10.3
  Background counts = 29.5
  Rate = 0.0008 +/- 0.0001
[Sun Oct 16 03:13:24 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:13:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:13:24 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:13:24 2011] Source does appear to be extended
[Sun Oct 16 03:13:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:13:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:13:58 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Sun Oct 16 03:13:58 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.898
[Sun Oct 16 03:13:58 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.79"
[Sun Oct 16 03:14:00 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct 16 03:14:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src9.csv
[Sun Oct 16 03:14:00 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct 16 03:14:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src9.csv
[Sun Oct 16 03:14:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf11073_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:14:01 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct 16 03:14:01 2011] fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct 16 03:14:01 2011] Fit fullrun_ccd3_acisf11073_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Oct 16 03:14:27 2011] Spatial fit model total counts = 104.999000, observed total counts = 105.000000
[Sun Oct 16 03:14:27 2011] Offset between fit and detection position for source 15 = 0.038730 pixels
[Sun Oct 16 03:14:27 2011] 106.846700 total counts/ 30.418900 bgd. counts: snr = 13.857331
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 0.038730 pixels
  Position = (509.8, 403.9) = 17 14 50.55 -29 25 8.2
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 76.4 +/- 10.3
  Background counts = 30.4
  Rate = 0.0008 +/- 0.0001
[Sun Oct 16 03:14:27 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:14:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:14:27 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:14:27 2011] Source does appear to be extended
[Sun Oct 16 03:14:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:20:10 2011] Not overwriting source region fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_src.reg
[Sun Oct 16 03:20:10 2011] Extracting stamp from image fullrun_ccd3_acisf11073_pi14-548_cl_sm2.00.img.gz, (474, 368) - (545, 439)
[Sun Oct 16 03:20:10 2011] Writing fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15.gif
[Sun Oct 16 03:20:38 2011] ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_src.evt and ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun Oct 16 03:20:38 2011] Size of ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_src.evt.gz[events] = 91 counts
[Sun Oct 16 03:20:38 2011] Mean chipx,y = (456.91, 720.66)
[Sun Oct 16 03:20:38 2011] Mean tdetx,y = (4411.34, 3517.91)
[Sun Oct 16 03:20:38 2011] chipx,y range = (437.00-478.00, 699.00-746.00)
[Sun Oct 16 03:20:38 2011] Size of ../../acisf11073/products/events/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_bgd.evt.gz[events] = 55 counts
[Sun Oct 16 03:20:38 2011] ../../acisf11073/products/images/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_src.img and ../../acisf11073/products/images/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun Oct 16 03:20:38 2011] ../../acisf11073/products/spectra/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_src.pi and ../../acisf11073/products/spectra/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun Oct 16 03:20:38 2011] Not generating rmf since there are only 76 counts
[Sun Oct 16 03:20:41 2011] ../../acisf11073/products/lightcurves/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_src.lc and ../../acisf11073/products/lightcurves/fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun Oct 16 03:22:43 2011] 178.276
[Sun Oct 16 03:23:02 2011] Updating aperture counts using extracted products
[Sun Oct 16 03:23:02 2011] Error reading totcts from fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15_src.pi.gz
[Sun Oct 16 03:23:02 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 03:23:02 2011] Using photon index=1.80, rate=0.000784, arf fullrun_ccd3_acisf11073_pi14-548_pass1_cl_src15.arf
[Sun Oct 16 03:23:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 03:23:02 2011] Updating source flux to 1e-14
[Sun Oct 16 03:23:37 2011] Source 15 has fewer than 100.000000 counts, skipping spectral fitting