[Sun Oct 16 03:10:57 2011] Detection parameters:
  Position = (736.9, 828.3) = 17 14 48.55 -29 30 3.9
  Extent = 0.7" x 0.6", rotation angle = 85 degrees
  Source counts = 121.8 +/- 11.3
  Background counts = 6.2
  Rate = 0.001 +/- 0.0001

[Sun Oct 16 03:11:00 2011] Off-axis axis estimate = 3.68'
[Sun Oct 16 03:12:53 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:12:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 03:12:53 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Sun Oct 16 03:12:53 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.998
[Sun Oct 16 03:12:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.74"
[Sun Oct 16 03:12:53 2011] fullrun_ccd2_acisf11073_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 16 03:12:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11073_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 03:12:54 2011] fullrun_ccd2_acisf11073_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 16 03:12:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11073_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 03:12:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11073_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11073_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:12:54 2011] fullrun_ccd2_acisf11073_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 16 03:12:54 2011] fullrun_ccd2_acisf11073_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 16 03:12:54 2011] Fit fullrun_ccd2_acisf11073_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 16 03:13:18 2011] Spatial fit model total counts = 131.000000, observed total counts = 131.000000
[Sun Oct 16 03:13:18 2011] Offset between fit and detection position for source 6 = 0.552853 pixels
[Sun Oct 16 03:13:18 2011] 131.069900 total counts/ 13.235900 bgd. counts: snr = 32.388727
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.552853 pixels
  Position = (737.3, 828.6) = 17 14 48.55 -29 30 4.0
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 117.8 +/- 11.4
  Background counts = 13.2
  Rate = 0.001 +/- 0.0001
[Sun Oct 16 03:13:18 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:13:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:13:18 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:13:18 2011] Source does appear to be extended
[Sun Oct 16 03:13:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:13:56 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:13:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 03:13:56 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Sun Oct 16 03:13:56 2011] source mask rpix=1.4, npix_max = 15, mask sum = 16, frac = 1.064
[Sun Oct 16 03:13:56 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.71"
[Sun Oct 16 03:13:57 2011] fullrun_ccd2_acisf11073_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 16 03:13:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11073_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 03:13:57 2011] fullrun_ccd2_acisf11073_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 16 03:13:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf11073_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 03:13:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf11073_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf11073_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:13:57 2011] fullrun_ccd2_acisf11073_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 16 03:13:57 2011] fullrun_ccd2_acisf11073_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 16 03:13:57 2011] Fit fullrun_ccd2_acisf11073_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 16 03:14:21 2011] Spatial fit model total counts = 130.801000, observed total counts = 131.000000
[Sun Oct 16 03:14:21 2011] Offset between fit and detection position for source 6 = 0.009413 pixels
[Sun Oct 16 03:14:21 2011] 130.560200 total counts/ 12.757200 bgd. counts: snr = 32.982128
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.009413 pixels
  Position = (737.4, 828.6) = 17 14 48.55 -29 30 4.0
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 117.8 +/- 11.4
  Background counts = 12.8
  Rate = 0.001 +/- 0.0001
[Sun Oct 16 03:14:21 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:14:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:14:21 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:14:21 2011] Source does appear to be extended
[Sun Oct 16 03:14:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:18:03 2011] Not overwriting source region fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_src.reg
[Sun Oct 16 03:18:03 2011] Extracting stamp from image fullrun_ccd2_acisf11073_pi14-548_cl_sm2.00.img.gz, (705, 796) - (770, 861)
[Sun Oct 16 03:18:03 2011] Writing fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6.gif
[Sun Oct 16 03:18:05 2011] ../../acisf11073/products/events/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_src.evt and ../../acisf11073/products/events/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sun Oct 16 03:18:05 2011] Size of ../../acisf11073/products/events/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_src.evt.gz[events] = 125 counts
[Sun Oct 16 03:18:05 2011] Mean chipx,y = (416.50, 764.13)
[Sun Oct 16 03:18:05 2011] Mean tdetx,y = (3825.13, 3669.50)
[Sun Oct 16 03:18:05 2011] chipx,y range = (397.00-435.00, 740.00-789.00)
[Sun Oct 16 03:18:05 2011] Size of ../../acisf11073/products/events/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 45 counts
[Sun Oct 16 03:18:05 2011] ../../acisf11073/products/images/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_src.img and ../../acisf11073/products/images/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sun Oct 16 03:18:05 2011] ../../acisf11073/products/spectra/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_src.pi and ../../acisf11073/products/spectra/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sun Oct 16 03:18:08 2011] ../../acisf11073/products/lightcurves/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_src.lc and ../../acisf11073/products/lightcurves/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sun Oct 16 03:20:09 2011] Keeping rmf generated by specextract
[Sun Oct 16 03:20:09 2011] 185.287
[Sun Oct 16 03:23:01 2011] Updating aperture counts using extracted products
[Sun Oct 16 03:23:01 2011] Error reading totcts from fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_src.pi.gz
[Sun Oct 16 03:23:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 03:23:01 2011] Using photon index=1.80, rate=0.00121, arf fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6.arf
[Sun Oct 16 03:23:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 03:23:01 2011] Updating source flux to 1.5e-14
[Sun Oct 16 03:23:37 2011] Reading fit data from acisf11073/analysis//spectral/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_pl.csv
[Sun Oct 16 03:23:37 2011] Spectral fit parameter nH value = 3.59395e+21
[Sun Oct 16 03:23:37 2011] Spectral fit parameter PhoIndex value = 5.83803
[Sun Oct 16 03:23:37 2011] Failed to get F(0.3-8.0) from acisf11073/analysis//spectral/fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Sun Oct 16 03:23:37 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 03:23:37 2011] Using Nh = 3.6e+21, photon index=5.84, rate=0.00121, arf fullrun_ccd2_acisf11073_pi14-548_pass1_cl_src6.arf
[Sun Oct 16 03:23:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 03:23:37 2011] Updating source flux to 1.4e-14