[Sun Oct 16 03:10:54 2011] Detection parameters:
  Position = (780.1, 978.8) = 17 14 1.66 -29 21 48.1
  Extent = 3.6" x 3.0", rotation angle = 158 degrees
  Source counts = 393.7 +/- 22.2
  Background counts = 100.3
  Rate = 0.004 +/- 0.0002

[Sun Oct 16 03:10:56 2011] Off-axis axis estimate = 9.52'
[Sun Oct 16 03:12:50 2011] Using EEF radius (= 4.01 ")to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:12:50 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 03:12:50 2011] Initial guess for spatial extent in simple fitting = 4.01"
[Sun Oct 16 03:12:50 2011] source mask rpix=8.1, npix_max = 299, mask sum = 306, frac = 1.023
[Sun Oct 16 03:12:50 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.01"
[Sun Oct 16 03:12:51 2011] fullrun_ccd1_acisf11073_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 16 03:12:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11073_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 03:12:51 2011] fullrun_ccd1_acisf11073_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 16 03:12:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11073_pi14-548_cl_pass0_src1.csv
[Sun Oct 16 03:12:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11073_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11073_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:12:52 2011] fullrun_ccd1_acisf11073_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 16 03:12:52 2011] fullrun_ccd1_acisf11073_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 16 03:12:52 2011] Fit fullrun_ccd1_acisf11073_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 16 03:13:13 2011] Spatial fit model total counts = 536.000000, observed total counts = 536.000000
[Sun Oct 16 03:13:13 2011] Offset between fit and detection position for source 1 = 0.579070 pixels
[Sun Oct 16 03:13:13 2011] 537.017000 total counts/ 145.306000 bgd. counts: snr = 32.495558
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.579070 pixels
  Position = (779.8, 979.2) = 17 14 1.69 -29 21 48.1
  Extent = 3.2 (2.9-3.5)", rotation angle = 0
  Source counts = 391.7 +/- 23.2
  Background counts = 145.3
  Rate = 0.004 +/- 0.0002
[Sun Oct 16 03:13:13 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:13:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:13:13 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:13:13 2011] Source does appear to be extended
[Sun Oct 16 03:13:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:13:54 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 16 03:13:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 16 03:13:54 2011] Initial guess for spatial extent in simple fitting = 3.23"
[Sun Oct 16 03:13:54 2011] source mask rpix=6.6, npix_max = 199, mask sum = 196, frac = 0.982
[Sun Oct 16 03:13:54 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.23"
[Sun Oct 16 03:13:54 2011] fullrun_ccd1_acisf11073_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 16 03:13:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11073_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 03:13:54 2011] fullrun_ccd1_acisf11073_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 16 03:13:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf11073_pi14-548_cl_pass1_src1.csv
[Sun Oct 16 03:13:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf11073_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf11073_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 16 03:13:55 2011] fullrun_ccd1_acisf11073_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 16 03:13:55 2011] fullrun_ccd1_acisf11073_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 16 03:13:55 2011] Fit fullrun_ccd1_acisf11073_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 16 03:14:16 2011] Spatial fit model total counts = 493.000000, observed total counts = 493.000000
[Sun Oct 16 03:14:16 2011] Offset between fit and detection position for source 1 = 0.012893 pixels
[Sun Oct 16 03:14:16 2011] 493.533000 total counts/ 112.192000 bgd. counts: snr = 36.002491
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012893 pixels
  Position = (779.8, 979.3) = 17 14 1.69 -29 21 48.1
  Extent = 3.1 (2.8-3.4)", rotation angle = 0
  Source counts = 381.3 +/- 22.2
  Background counts = 112.2
  Rate = 0.004 +/- 0.0002
[Sun Oct 16 03:14:16 2011] Vigneting correction estimate = 1.000000
[Sun Oct 16 03:14:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 16 03:14:16 2011] Assessing source extent using major axis lower bound
[Sun Oct 16 03:14:16 2011] Source does appear to be extended
[Sun Oct 16 03:14:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 16 03:16:05 2011] Not overwriting source region fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 16 03:16:05 2011] Extracting stamp from image fullrun_ccd1_acisf11073_pi14-548_cl_sm2.00.img.gz, (637, 836) - (923, 1122)
[Sun Oct 16 03:16:05 2011] Writing fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1.gif
[Sun Oct 16 03:16:08 2011] ../../acisf11073/products/events/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_src.evt and ../../acisf11073/products/events/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 16 03:16:08 2011] Size of ../../acisf11073/products/events/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_src.evt.gz[events] = 471 counts
[Sun Oct 16 03:16:08 2011] Mean chipx,y = (625.97, 105.30)
[Sun Oct 16 03:16:08 2011] Mean tdetx,y = (5026.70, 4732.97)
[Sun Oct 16 03:16:08 2011] chipx,y range = (591.00-662.00, 71.00-149.00)
[Sun Oct 16 03:16:08 2011] Size of ../../acisf11073/products/events/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 833 counts
[Sun Oct 16 03:16:08 2011] ../../acisf11073/products/images/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_src.img and ../../acisf11073/products/images/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 16 03:16:08 2011] ../../acisf11073/products/spectra/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_src.pi and ../../acisf11073/products/spectra/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 16 03:16:10 2011] ../../acisf11073/products/lightcurves/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_src.lc and ../../acisf11073/products/lightcurves/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 16 03:18:01 2011] Keeping rmf generated by specextract
[Sun Oct 16 03:18:01 2011] 166.117
[Sun Oct 16 03:23:00 2011] Updating aperture counts using extracted products
[Sun Oct 16 03:23:00 2011] Error reading totcts from fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 16 03:23:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 03:23:00 2011] Using photon index=1.80, rate=0.00391, arf fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1.arf
[Sun Oct 16 03:23:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 03:23:00 2011] Updating source flux to 5.4e-14
[Sun Oct 16 03:23:33 2011] Reading fit data from acisf11073/analysis//spectral/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 16 03:23:33 2011] Spectral fit parameter nH value = 6.97649e+21
[Sun Oct 16 03:23:33 2011] Spectral fit parameter PhoIndex value = 2.11761
[Sun Oct 16 03:23:33 2011] Failed to get F(0.3-8.0) from acisf11073/analysis//spectral/fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 16 03:23:33 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 16 03:23:33 2011] Using Nh = 7e+21, photon index=2.12, rate=0.00391, arf fullrun_ccd1_acisf11073_pi14-548_pass1_cl_src1.arf
[Sun Oct 16 03:23:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 16 03:23:33 2011] Updating source flux to 5.4e-14