[Sun Oct 16 03:10:53 2011] Detection parameters: Position = (149.8, 257.2) = 17 14 31.55 -29 36 5.6 Extent = 1.3" x 1.1", rotation angle = 11 degrees Source counts = 10.9 +/- 4.0 Background counts = 5.1 Rate = 0.0001 +/- 4e-05 [Sun Oct 16 03:10:54 2011] Off-axis axis estimate = 7.88' [Sun Oct 16 03:12:47 2011] Using EEF radius (= 2.75 ")to estimate initial spatial extent for simple fitting [Sun Oct 16 03:12:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sun Oct 16 03:12:47 2011] Initial guess for spatial extent in simple fitting = 2.75" [Sun Oct 16 03:12:47 2011] source mask rpix=5.6, npix_max = 147, mask sum = 144, frac = 0.974 [Sun Oct 16 03:12:47 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 2.75" [Sun Oct 16 03:12:49 2011] fullrun_ccd0_acisf11073_pi14-548_cl_pass0_src14.ximg exists [Sun Oct 16 03:12:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11073_pi14-548_cl_pass0_src14.csv [Sun Oct 16 03:12:49 2011] fullrun_ccd0_acisf11073_pi14-548_cl_pass0_src14_1.ximg exists [Sun Oct 16 03:12:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf11073_pi14-548_cl_pass0_src14.csv [Sun Oct 16 03:12:49 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf11073_pi14-548_cl_pass0_src14_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf11073_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Oct 16 03:12:50 2011] fullrun_ccd0_acisf11073_pi14-548_cl_pass0_tfrozen_src14.ximg exists [Sun Oct 16 03:12:50 2011] fullrun_ccd0_acisf11073_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists [Sun Oct 16 03:12:50 2011] Fit fullrun_ccd0_acisf11073_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly [Sun Oct 16 03:13:09 2011] Spatial fit model total counts = 74.273500, observed total counts = 74.000000 [Sun Oct 16 03:13:09 2011] Offset between fit and detection position for source 24 = 1.368816 pixels [Sun Oct 16 03:13:09 2011] 74.183060 total counts/ 65.953900 bgd. counts: snr = 1.013294 Spatial fit parameters: Offset between fit and detection position for source 24 = 1.368816 pixels Position = (150.0, 258.6) = 17 14 31.56 -29 36 5.2 Extent = 0.7" x 0.7", rotation angle = 0 Source counts = 8.2 +/- 8.6 Background counts = 66.0 Rate = 8e-05 +/- 9e-05 Deleting source due to low Poisson probability