[Tue Feb 28 00:45:32 2012] Detection parameters:
  Position = (183.5, 222.8) = 17 48 17.95 -24 46 54.8
  Extent = 0.5" x 0.5", rotation angle = 177 degrees
  Source counts = 405.1 +/- 21.2
  Background counts = 45.9
  Rate = 0.04 +/- 0.002

[Tue Feb 28 00:45:35 2012] Off-axis axis estimate = 2.83'
[Tue Feb 28 01:00:08 2012] Using EEF radius (= 0.55 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 01:00:08 2012] Initial guess for spatial extent in simple fitting = 0.55"
[Tue Feb 28 01:00:08 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.867
[Tue Feb 28 01:00:08 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 0.55"
[Tue Feb 28 06:00:54 2012] fullrun_ccd7_acisf11051_pi14-548_cl_pass0_src35.ximg exists
[Tue Feb 28 06:00:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11051_pi14-548_cl_pass0_src35.csv
[Tue Feb 28 06:00:54 2012] fullrun_ccd7_acisf11051_pi14-548_cl_pass0_src35_1.ximg exists
[Tue Feb 28 06:00:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11051_pi14-548_cl_pass0_src35.csv
[Tue Feb 28 06:00:54 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11051_pi14-548_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11051_pi14-548_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 06:00:55 2012] fullrun_ccd7_acisf11051_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Tue Feb 28 06:00:55 2012] fullrun_ccd7_acisf11051_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Feb 28 06:00:55 2012] Fit fullrun_ccd7_acisf11051_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Feb 28 06:01:15 2012] Spatial fit model total counts = 822.782000, observed total counts = 818.000000
[Tue Feb 28 06:01:15 2012] Offset between fit and detection position for source 13 = 1.147570 pixels
[Tue Feb 28 06:01:15 2012] 703.851000 total counts/ 330.286000 bgd. counts: snr = 20.555171
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.147570 pixels
  Position = (184.5, 223.3) = 17 48 17.94 -24 46 54.7
  Extent = 0.9 (0.9-1.1)", rotation angle = 0
  Source counts = 373.6 +/- 26.5
  Background counts = 330.3
  Rate = 0.04 +/- 0.003
[Tue Feb 28 06:01:15 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 06:01:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 06:01:15 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 06:01:15 2012] Source does appear to be extended
[Tue Feb 28 06:01:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 06:01:15 2012] Source is confused with source 68
[Tue Feb 28 06:10:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 06:10:39 2012] Initial guess for spatial extent in simple fitting = 0.95"
[Tue Feb 28 06:10:39 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.061
[Tue Feb 28 06:10:39 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 0.95"
[Tue Feb 28 11:38:09 2012] fullrun_ccd7_acisf11051_pi14-548_cl_pass1_src35.ximg exists
[Tue Feb 28 11:38:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11051_pi14-548_cl_pass1_src35.csv
[Tue Feb 28 11:38:09 2012] fullrun_ccd7_acisf11051_pi14-548_cl_pass1_src35_1.ximg exists
[Tue Feb 28 11:38:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf11051_pi14-548_cl_pass1_src35.csv
[Tue Feb 28 11:38:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf11051_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf11051_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 11:38:11 2012] fullrun_ccd7_acisf11051_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Tue Feb 28 11:38:11 2012] fullrun_ccd7_acisf11051_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Tue Feb 28 11:38:11 2012] Fit fullrun_ccd7_acisf11051_pi14-548_cl_pass1_tfrozen_src35 appears to have run properly
[Tue Feb 28 11:38:31 2012] Warning, spatial fit 35 centroid is now closest to src. 69
[Tue Feb 28 11:38:32 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 11:38:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 11:38:32 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 11:38:32 2012] Source does appear to be extended
[Tue Feb 28 11:38:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 11:41:12 2012] Writing source region out to fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13_src.reg
[Tue Feb 28 11:41:12 2012] Extracting stamp from image fullrun_ccd7_acisf11051_pi14-548_cl_sm2.00.img.gz, (141, 180) - (228, 267)
[Tue Feb 28 11:41:12 2012] Writing fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13.gif
[Tue Feb 28 11:52:41 2012] Size of ../../acisf11051/products/events/fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13_src.evt.gz[events] = 766 counts
[Tue Feb 28 11:52:41 2012] Mean chipx,y = (205.97, 148.03)
[Tue Feb 28 11:52:41 2012] Mean tdetx,y = (4122.97, 1850.03)
[Tue Feb 28 11:52:41 2012] chipx,y range = (184.00-228.00, 124.00-172.00)
[Tue Feb 28 11:52:41 2012] Size of ../../acisf11051/products/events/fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 574 counts
[Tue Feb 28 11:52:43 2012] rmf not found, will run specextract
[Tue Feb 28 11:52:43 2012] arf not found, will run specextract
[Tue Feb 28 11:52:50 2012] ../../acisf11051/products/spectra/fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13.warf not found
[Tue Feb 28 11:52:50 2012] ../../acisf11051/products/spectra/fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13.wrmf not found
[Tue Feb 28 11:52:50 2012] Removal of ../../acisf11051/products/spectra/fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13.soff failed
[Tue Feb 28 12:23:06 2012] Keeping rmf generated by specextract
[Tue Feb 28 12:23:06 2012] 224.823
[Tue Feb 28 12:23:13 2012] Updating aperture counts using extracted products
[Tue Feb 28 12:23:13 2012] Error reading totcts from fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13_src.pi.gz
[Tue Feb 28 12:23:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 12:23:15 2012] Using photon index=1.80, rate=0.0376, arf fullrun_ccd7_acisf11051_pi14-548_pass1_cl_src13.arf
[Tue Feb 28 12:23:15 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 12:23:15 2012] Updating source flux to 4.1e-13
[Tue Feb 28 12:23:28 2012] Flag c found in src. 13 procflags, skipping spectral fitting